Packages

package immutable

Source
package.scala
Linear Supertypes
Content Hierarchy
Ordering
  1. Alphabetic
  2. By Inheritance
Inherited
  1. immutable
  2. AnyRef
  3. Any
  1. Hide All
  2. Show All
Visibility
  1. Public
  2. Protected

Type Members

  1. final case class ::[+A](head: A, next: List[A]) extends List[A] with Product with Serializable
  2. abstract class AbstractMap[K, +V] extends collection.AbstractMap[K, V] with Map[K, V]

    Explicit instantiation of the Map trait to reduce class file size in subclasses.

  3. abstract class AbstractSeq[+A] extends collection.AbstractSeq[A] with Seq[A]

    Explicit instantiation of the Seq trait to reduce class file size in subclasses.

  4. abstract class AbstractSet[A] extends collection.AbstractSet[A] with Set[A]

    Explicit instantiation of the Set trait to reduce class file size in subclasses.

  5. sealed abstract class ArraySeq[+A] extends AbstractSeq[A] with IndexedSeq[A] with IndexedSeqOps[A, ArraySeq, ArraySeq[A]] with StrictOptimizedSeqOps[A, ArraySeq, ArraySeq[A]] with EvidenceIterableFactoryDefaults[A, ArraySeq, ClassTag] with Serializable

    An immutable array.

    An immutable array.

    Supports efficient indexed access and has a small memory footprint.

  6. sealed abstract class BitSet extends AbstractSet[Int] with SortedSet[Int] with SortedSetOps[Int, SortedSet, BitSet] with StrictOptimizedSortedSetOps[Int, SortedSet, BitSet] with collection.BitSet with BitSetOps[BitSet] with Serializable

    A class for immutable bitsets.

    A class for immutable bitsets.

    Bitsets are sets of non-negative integers which are represented as variable-size arrays of bits packed into 64-bit words. The lower bound of memory footprint of a bitset is determined by the largest number stored in it.

    See also

    "Scala's Collection Library overview" section on Immutable BitSets for more information.

  7. final class HashMap[K, +V] extends AbstractMap[K, V] with StrictOptimizedMapOps[K, V, HashMap, HashMap[K, V]] with MapFactoryDefaults[K, V, HashMap, Iterable] with DefaultSerializable

    This class implements immutable maps using a Compressed Hash-Array Mapped Prefix-tree.

    This class implements immutable maps using a Compressed Hash-Array Mapped Prefix-tree. See paper https://michael.steindorfer.name/publications/oopsla15.pdf for more details.

    K

    the type of the keys contained in this hash set.

    V

    the type of the values associated with the keys in this hash map.

  8. final class HashSet[A] extends AbstractSet[A] with StrictOptimizedSetOps[A, HashSet, HashSet[A]] with IterableFactoryDefaults[A, HashSet] with DefaultSerializable

    This class implements immutable sets using a Compressed Hash-Array Mapped Prefix-tree.

    This class implements immutable sets using a Compressed Hash-Array Mapped Prefix-tree. See paper https://michael.steindorfer.name/publications/oopsla15.pdf for more details.

    A

    the type of the elements contained in this hash set.

  9. trait IndexedSeq[+A] extends Seq[A] with collection.IndexedSeq[A] with IndexedSeqOps[A, IndexedSeq, IndexedSeq[A]] with IterableFactoryDefaults[A, IndexedSeq]

    Base trait for immutable indexed sequences that have efficient apply and length

  10. trait IndexedSeqOps[+A, +CC[_], +C] extends SeqOps[A, CC, C] with collection.IndexedSeqOps[A, CC, C]

    Base trait for immutable indexed Seq operations

  11. sealed abstract class IntMap[+T] extends AbstractMap[immutable.IntMapUtils.Int, T] with StrictOptimizedMapOps[immutable.IntMapUtils.Int, T, Map, IntMap[T]] with Serializable

    Specialised immutable map structure for integer keys, based on Fast Mergeable Integer Maps by Okasaki and Gill.

    Specialised immutable map structure for integer keys, based on Fast Mergeable Integer Maps by Okasaki and Gill. Essentially a trie based on binary digits of the integers.

    Note: This class is as of 2.8 largely superseded by HashMap.

    T

    type of the values associated with integer keys.

  12. trait Iterable[+A] extends collection.Iterable[A] with IterableOps[A, Iterable, Iterable[A]] with IterableFactoryDefaults[A, Iterable]

    A trait for collections that are guaranteed immutable.

    A trait for collections that are guaranteed immutable.

    A

    the element type of the collection

  13. final class LazyList[+A] extends AbstractSeq[A] with LinearSeq[A] with LinearSeqOps[A, LazyList, LazyList[A]] with IterableFactoryDefaults[A, LazyList] with Serializable

    This class implements an immutable linked list.

    This class implements an immutable linked list. We call it "lazy" because it computes its elements only when they are needed.

    Elements are memoized; that is, the value of each element is computed at most once.

    Elements are computed in-order and are never skipped. In other words, accessing the tail causes the head to be computed first.

    How lazy is a LazyList? When you have a value of type LazyList, you don't know yet whether the list is empty or not. If you learn that it is non-empty, then you also know that the head has been computed. But the tail is itself a LazyList, whose emptiness-or-not might remain undetermined.

    A LazyList may be infinite. For example, LazyList.from(0) contains all of the natural numbers 0, 1, 2, and so on. For infinite sequences, some methods (such as count, sum, max or min) will not terminate.

    Here is an example:

    import scala.math.BigInt
    object Main extends App {
      val fibs: LazyList[BigInt] =
        BigInt(0) #:: BigInt(1) #:: fibs.zip(fibs.tail).map{ n => n._1 + n._2 }
      fibs.take(5).foreach(println)
    }
    
    // prints
    //
    // 0
    // 1
    // 1
    // 2
    // 3

    To illustrate, let's add some output to the definition fibs, so we see what's going on.

    import scala.math.BigInt
    object Main extends App {
      val fibs: LazyList[BigInt] =
        BigInt(0) #:: BigInt(1) #::
          fibs.zip(fibs.tail).map{ n =>
            println(s"Adding ${n._1} and ${n._2}")
            n._1 + n._2
          }
      fibs.take(5).foreach(println)
      fibs.take(6).foreach(println)
    }
    
    // prints
    //
    // 0
    // 1
    // Adding 0 and 1
    // 1
    // Adding 1 and 1
    // 2
    // Adding 1 and 2
    // 3
    
    // And then prints
    //
    // 0
    // 1
    // 1
    // 2
    // 3
    // Adding 2 and 3
    // 5

    Note that the definition of fibs uses val not def. The memoization of the LazyList requires us to have somewhere to store the information and a val allows us to do that.

    Further remarks about the semantics of LazyList:

    • Though the LazyList changes as it is accessed, this does not contradict its immutability. Once the values are memoized they do not change. Values that have yet to be memoized still "exist", they simply haven't been computed yet.
    • One must be cautious of memoization; it can eat up memory if you're not careful. That's because memoization of the LazyList creates a structure much like scala.collection.immutable.List. As long as something is holding on to the head, the head holds on to the tail, and so on recursively. If, on the other hand, there is nothing holding on to the head (e.g. if we used def to define the LazyList) then once it is no longer being used directly, it disappears.
    • Note that some operations, including drop, dropWhile, flatMap or collect may process a large number of intermediate elements before returning.

    Here's another example. Let's start with the natural numbers and iterate over them.

    // We'll start with a silly iteration
    def loop(s: String, i: Int, iter: Iterator[Int]): Unit = {
      // Stop after 200,000
      if (i < 200001) {
        if (i % 50000 == 0) println(s + i)
        loop(s, iter.next(), iter)
      }
    }
    
    // Our first LazyList definition will be a val definition
    val lazylist1: LazyList[Int] = {
      def loop(v: Int): LazyList[Int] = v #:: loop(v + 1)
      loop(0)
    }
    
    // Because lazylist1 is a val, everything that the iterator produces is held
    // by virtue of the fact that the head of the LazyList is held in lazylist1
    val it1 = lazylist1.iterator
    loop("Iterator1: ", it1.next(), it1)
    
    // We can redefine this LazyList such that all we have is the Iterator left
    // and allow the LazyList to be garbage collected as required.  Using a def
    // to provide the LazyList ensures that no val is holding onto the head as
    // is the case with lazylist1
    def lazylist2: LazyList[Int] = {
      def loop(v: Int): LazyList[Int] = v #:: loop(v + 1)
      loop(0)
    }
    val it2 = lazylist2.iterator
    loop("Iterator2: ", it2.next(), it2)
    
    // And, of course, we don't actually need a LazyList at all for such a simple
    // problem.  There's no reason to use a LazyList if you don't actually need
    // one.
    val it3 = new Iterator[Int] {
      var i = -1
      def hasNext = true
      def next(): Int = { i += 1; i }
    }
    loop("Iterator3: ", it3.next(), it3)
    • In the fibs example earlier, the fact that tail works at all is of interest. fibs has an initial (0, 1, LazyList(...)), so tail is deterministic. If we defined fibs such that only 0 were concretely known, then the act of determining tail would require the evaluation of tail, so the computation would be unable to progress, as in this code:
    // The first time we try to access the tail we're going to need more
    // information which will require us to recurse, which will require us to
    // recurse, which...
    lazy val sov: LazyList[Vector[Int]] = Vector(0) #:: sov.zip(sov.tail).map { n => n._1 ++ n._2 }

    The definition of fibs above creates a larger number of objects than necessary depending on how you might want to implement it. The following implementation provides a more "cost effective" implementation due to the fact that it has a more direct route to the numbers themselves:

    lazy val fib: LazyList[Int] = {
      def loop(h: Int, n: Int): LazyList[Int] = h #:: loop(n, h + n)
      loop(1, 1)
    }

    The head, the tail and whether the list is empty or not can be initially unknown. Once any of those are evaluated, they are all known, though if the tail is built with #:: or #:::, it's content still isn't evaluated. Instead, evaluating the tails content is deferred until the tails empty status, head or tail is evaluated.

    Delaying the evaluation of whether a LazyList is empty or not until it's needed allows LazyList to not eagerly evaluate any elements on a call to filter.

    Only when it's further evaluated (which may be never!) any of the elements gets forced.

    for example:

    def tailWithSideEffect: LazyList[Nothing] = {
      println("getting empty LazyList")
      LazyList.empty
    }
    
    val emptyTail = tailWithSideEffect // prints "getting empty LazyList"
    
    val suspended = 1 #:: tailWithSideEffect // doesn't print anything
    val tail = suspended.tail // although the tail is evaluated, *still* nothing is yet printed
    val filtered = tail.filter(_ => false) // still nothing is printed
    filtered.isEmpty // prints "getting empty LazyList"
    A

    the type of the elements contained in this lazy list.

    Annotations
    @SerialVersionUID()
    See also

    "Scala's Collection Library overview" section on LazyLists for more information.

  14. trait LinearSeq[+A] extends Seq[A] with collection.LinearSeq[A] with LinearSeqOps[A, LinearSeq, LinearSeq[A]] with IterableFactoryDefaults[A, LinearSeq]

    Base trait for immutable linear sequences that have efficient head and tail

  15. trait LinearSeqOps[+A, +CC[X] <: LinearSeq[X], +C <: LinearSeq[A] with LinearSeqOps[A, CC, C]] extends SeqOps[A, CC, C] with collection.LinearSeqOps[A, CC, C]
  16. sealed abstract class List[+A] extends AbstractSeq[A] with LinearSeq[A] with LinearSeqOps[A, List, List[A]] with StrictOptimizedLinearSeqOps[A, List, List[A]] with StrictOptimizedSeqOps[A, List, List[A]] with IterableFactoryDefaults[A, List] with DefaultSerializable

    A class for immutable linked lists representing ordered collections of elements of type A.

    A class for immutable linked lists representing ordered collections of elements of type A.

    This class comes with two implementing case classes scala.Nil and scala.:: that implement the abstract members isEmpty, head and tail.

    This class is optimal for last-in-first-out (LIFO), stack-like access patterns. If you need another access pattern, for example, random access or FIFO, consider using a collection more suited to this than List.

    Performance

    Time: List has O(1) prepend and head/tail access. Most other operations are O(n) on the number of elements in the list. This includes the index-based lookup of elements, length, append and reverse.

    Space: List implements structural sharing of the tail list. This means that many operations are either zero- or constant-memory cost.

    val mainList = List(3, 2, 1)
    val with4 =    4 :: mainList  // re-uses mainList, costs one :: instance
    val with42 =   42 :: mainList // also re-uses mainList, cost one :: instance
    val shorter =  mainList.tail  // costs nothing as it uses the same 2::1::Nil instances as mainList
    Annotations
    @SerialVersionUID()
    Example:
    1. // Make a list via the companion object factory
      val days = List("Sunday", "Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday")
      
      // Make a list element-by-element
      val when = "AM" :: "PM" :: Nil
      
      // Pattern match
      days match {
        case firstDay :: otherDays =>
          println("The first day of the week is: " + firstDay)
        case Nil =>
          println("There don't seem to be any week days.")
      }
    Note

    The functional list is characterized by persistence and structural sharing, thus offering considerable performance and space consumption benefits in some scenarios if used correctly. However, note that objects having multiple references into the same functional list (that is, objects that rely on structural sharing), will be serialized and deserialized with multiple lists, one for each reference to it. I.e. structural sharing is lost after serialization/deserialization.

    See also

    "Scala's Collection Library overview" section on Lists for more information.

  17. sealed class ListMap[K, +V] extends AbstractMap[K, V] with SeqMap[K, V] with StrictOptimizedMapOps[K, V, ListMap, ListMap[K, V]] with MapFactoryDefaults[K, V, ListMap, Iterable] with DefaultSerializable

    This class implements immutable maps using a list-based data structure.

    This class implements immutable maps using a list-based data structure. List map iterators and traversal methods visit key-value pairs in the order they were first inserted.

    Entries are stored internally in reversed insertion order, which means the newest key is at the head of the list. As such, methods such as head and tail are O(n), while last and init are O(1). Other operations, such as inserting or removing entries, are also O(n), which makes this collection suitable only for a small number of elements.

    Instances of ListMap represent empty maps; they can be either created by calling the constructor directly, or by applying the function ListMap.empty.

    K

    the type of the keys contained in this list map

    V

    the type of the values associated with the keys

  18. sealed class ListSet[A] extends AbstractSet[A] with StrictOptimizedSetOps[A, ListSet, ListSet[A]] with IterableFactoryDefaults[A, ListSet] with DefaultSerializable

    This class implements immutable sets using a list-based data structure.

    This class implements immutable sets using a list-based data structure. List set iterators and traversal methods visit elements in the order they were first inserted.

    Elements are stored internally in reversed insertion order, which means the newest element is at the head of the list. As such, methods such as head and tail are O(n), while last and init are O(1). Other operations, such as inserting or removing entries, are also O(n), which makes this collection suitable only for a small number of elements.

    Instances of ListSet represent empty sets; they can be either created by calling the constructor directly, or by applying the function ListSet.empty.

    A

    the type of the elements contained in this list set

  19. sealed abstract class LongMap[+T] extends AbstractMap[immutable.LongMapUtils.Long, T] with StrictOptimizedMapOps[immutable.LongMapUtils.Long, T, Map, LongMap[T]] with Serializable

    Specialised immutable map structure for long keys, based on Fast Mergeable Long Maps by Okasaki and Gill.

    Specialised immutable map structure for long keys, based on Fast Mergeable Long Maps by Okasaki and Gill. Essentially a trie based on binary digits of the integers.

    Note: This class is as of 2.8 largely superseded by HashMap.

    T

    type of the values associated with the long keys.

  20. trait Map[K, +V] extends Iterable[(K, V)] with collection.Map[K, V] with MapOps[K, V, Map, Map[K, V]] with MapFactoryDefaults[K, V, Map, Iterable]

    Base type of immutable Maps

  21. trait MapOps[K, +V, +CC[X, +Y] <: MapOps[X, Y, CC, _], +C <: MapOps[K, V, CC, C]] extends IterableOps[(K, V), Iterable, C] with collection.MapOps[K, V, CC, C]

    Base trait of immutable Maps implementations

  22. sealed class NumericRange[T] extends AbstractSeq[T] with IndexedSeq[T] with IndexedSeqOps[T, IndexedSeq, IndexedSeq[T]] with StrictOptimizedSeqOps[T, IndexedSeq, IndexedSeq[T]] with IterableFactoryDefaults[T, IndexedSeq] with Serializable

    NumericRange is a more generic version of the Range class which works with arbitrary types.

    NumericRange is a more generic version of the Range class which works with arbitrary types. It must be supplied with an Integral implementation of the range type.

    Factories for likely types include Range.BigInt, Range.Long, and Range.BigDecimal. Range.Int exists for completeness, but the Int-based scala.Range should be more performant.

    val r1 = Range(0, 100, 1)
    val veryBig = Int.MaxValue.toLong + 1
    val r2 = Range.Long(veryBig, veryBig + 100, 1)
    assert(r1 sameElements r2.map(_ - veryBig))
    Annotations
    @SerialVersionUID()
  23. sealed class Queue[+A] extends AbstractSeq[A] with LinearSeq[A] with LinearSeqOps[A, Queue, Queue[A]] with StrictOptimizedLinearSeqOps[A, Queue, Queue[A]] with StrictOptimizedSeqOps[A, Queue, Queue[A]] with IterableFactoryDefaults[A, Queue] with DefaultSerializable

    Queue objects implement data structures that allow to insert and retrieve elements in a first-in-first-out (FIFO) manner.

    Queue objects implement data structures that allow to insert and retrieve elements in a first-in-first-out (FIFO) manner.

    Queue is implemented as a pair of Lists, one containing the in elements and the other the out elements. Elements are added to the in list and removed from the out list. When the out list runs dry, the queue is pivoted by replacing the out list by in.reverse, and in by Nil.

    Adding items to the queue always has cost O(1). Removing items has cost O(1), except in the case where a pivot is required, in which case, a cost of O(n) is incurred, where n is the number of elements in the queue. When this happens, n remove operations with O(1) cost are guaranteed. Removing an item is on average O(1).

    See also

    "Scala's Collection Library overview" section on Immutable Queues for more information.

  24. sealed abstract class Range extends AbstractSeq[Int] with IndexedSeq[Int] with IndexedSeqOps[Int, IndexedSeq, IndexedSeq[Int]] with StrictOptimizedSeqOps[Int, IndexedSeq, IndexedSeq[Int]] with IterableFactoryDefaults[Int, IndexedSeq] with Serializable

    The Range class represents integer values in range [start;end) with non-zero step value step.

    The Range class represents integer values in range [start;end) with non-zero step value step. It's a special case of an indexed sequence. For example:

    val r1 = 0 until 10
    val r2 = r1.start until r1.end by r1.step + 1
    println(r2.length) // = 5

    Ranges that contain more than Int.MaxValue elements can be created, but these overfull ranges have only limited capabilities. Any method that could require a collection of over Int.MaxValue length to be created, or could be asked to index beyond Int.MaxValue elements will throw an exception. Overfull ranges can safely be reduced in size by changing the step size (e.g. by 3) or taking/dropping elements. contains, equals, and access to the ends of the range (head, last, tail, init) are also permitted on overfull ranges.

    Annotations
    @SerialVersionUID()
  25. trait Seq[+A] extends Iterable[A] with collection.Seq[A] with SeqOps[A, Seq, Seq[A]] with IterableFactoryDefaults[A, Seq]
  26. trait SeqMap[K, +V] extends Map[K, V] with collection.SeqMap[K, V] with MapOps[K, V, SeqMap, SeqMap[K, V]] with MapFactoryDefaults[K, V, SeqMap, Iterable]

    A base trait for ordered, immutable maps.

    A base trait for ordered, immutable maps.

    Note that the equals method for SeqMap compares key-value pairs without regard to ordering.

    All behavior is defined in terms of the abstract methods in SeqMap. It is sufficient for concrete subclasses to implement those methods. Methods that return a new map, in particular removed and updated, must preserve ordering.

    K

    the type of the keys contained in this linked map.

    V

    the type of the values associated with the keys in this linked map.

  27. trait SeqOps[+A, +CC[_], +C] extends collection.SeqOps[A, CC, C]

  28. trait Set[A] extends Iterable[A] with collection.Set[A] with SetOps[A, Set, Set[A]] with IterableFactoryDefaults[A, Set]

    Base trait for immutable set collections

  29. trait SetOps[A, +CC[X], +C <: SetOps[A, CC, C]] extends collection.SetOps[A, CC, C]

    Base trait for immutable set operations

  30. trait SortedMap[K, +V] extends Map[K, V] with collection.SortedMap[K, V] with SortedMapOps[K, V, SortedMap, SortedMap[K, V]] with SortedMapFactoryDefaults[K, V, SortedMap, Iterable, Map]

    An immutable map whose key-value pairs are sorted according to an scala.math.Ordering on the keys.

    An immutable map whose key-value pairs are sorted according to an scala.math.Ordering on the keys.

    Allows for range queries to be performed on its keys, and implementations must guarantee that traversal happens in sorted order, according to the map's scala.math.Ordering.

    K

    the type of the keys contained in this tree map.

    V

    the type of the values associated with the keys.

    Example:
    1. import scala.collection.immutable.SortedMap
      
      // Make a SortedMap via the companion object factory
      val weekdays = SortedMap(
        2 -> "Monday",
        3 -> "Tuesday",
        4 -> "Wednesday",
        5 -> "Thursday",
        6 -> "Friday"
      )
      // TreeMap(2 -> Monday, 3 -> Tuesday, 4 -> Wednesday, 5 -> Thursday, 6 -> Friday)
      
      val days = weekdays ++ List(1 -> "Sunday", 7 -> "Saturday")
      // TreeMap(1 -> Sunday, 2 -> Monday, 3 -> Tuesday, 4 -> Wednesday, 5 -> Thursday, 6 -> Friday, 7 -> Saturday)
      
      val day3 = days.get(3) // Some("Tuesday")
      
      val rangeOfDays = days.range(2, 5) // TreeMap(2 -> Monday, 3 -> Tuesday, 4 -> Wednesday)
      
      val daysUntil2 = days.rangeUntil(2) // TreeMap(1 -> Sunday)
      val daysTo2 = days.rangeTo(2) // TreeMap(1 -> Sunday, 2 -> Monday)
      val daysAfter5 = days.rangeFrom(5) //  TreeMap(5 -> Thursday, 6 -> Friday, 7 -> Saturday)
  31. trait SortedMapOps[K, +V, +CC[X, +Y] <: Map[X, Y] with SortedMapOps[X, Y, CC, _], +C <: SortedMapOps[K, V, CC, C]] extends MapOps[K, V, Map, C] with collection.SortedMapOps[K, V, CC, C]
  32. trait SortedSet[A] extends Set[A] with collection.SortedSet[A] with SortedSetOps[A, SortedSet, SortedSet[A]] with SortedSetFactoryDefaults[A, SortedSet, Set]

    Base trait for sorted sets

  33. trait SortedSetOps[A, +CC[X] <: SortedSet[X], +C <: SortedSetOps[A, CC, C]] extends SetOps[A, Set, C] with collection.SortedSetOps[A, CC, C]

  34. trait StrictOptimizedMapOps[K, +V, +CC[X, +Y] <: MapOps[X, Y, CC, _], +C <: MapOps[K, V, CC, C]] extends MapOps[K, V, CC, C] with collection.StrictOptimizedMapOps[K, V, CC, C] with StrictOptimizedIterableOps[(K, V), Iterable, C]
  35. trait StrictOptimizedSeqOps[+A, +CC[_], +C] extends SeqOps[A, CC, C] with collection.StrictOptimizedSeqOps[A, CC, C] with StrictOptimizedIterableOps[A, CC, C]

    Trait that overrides operations to take advantage of strict builders.

  36. trait StrictOptimizedSetOps[A, +CC[X], +C <: SetOps[A, CC, C]] extends SetOps[A, CC, C] with collection.StrictOptimizedSetOps[A, CC, C] with StrictOptimizedIterableOps[A, CC, C]
  37. trait StrictOptimizedSortedMapOps[K, +V, +CC[X, +Y] <: Map[X, Y] with SortedMapOps[X, Y, CC, _], +C <: SortedMapOps[K, V, CC, C]] extends SortedMapOps[K, V, CC, C] with collection.StrictOptimizedSortedMapOps[K, V, CC, C] with StrictOptimizedMapOps[K, V, Map, C]
  38. trait StrictOptimizedSortedSetOps[A, +CC[X] <: SortedSet[X], +C <: SortedSetOps[A, CC, C]] extends SortedSetOps[A, CC, C] with collection.StrictOptimizedSortedSetOps[A, CC, C] with StrictOptimizedSetOps[A, Set, C]
  39. type StringOps = collection.StringOps
  40. type StringView = collection.StringView
  41. final class TreeMap[K, +V] extends AbstractMap[K, V] with SortedMap[K, V] with StrictOptimizedSortedMapOps[K, V, TreeMap, TreeMap[K, V]] with SortedMapFactoryDefaults[K, V, TreeMap, Iterable, Map] with DefaultSerializable

    An immutable SortedMap whose values are stored in a red-black tree.

    An immutable SortedMap whose values are stored in a red-black tree.

    This class is optimal when range queries will be performed, or when traversal in order of an ordering is desired. If you only need key lookups, and don't care in which order key-values are traversed in, consider using * scala.collection.immutable.HashMap, which will generally have better performance. If you need insertion order, consider a * scala.collection.immutable.SeqMap, which does not need to have an ordering supplied.

    K

    the type of the keys contained in this tree map.

    V

    the type of the values associated with the keys.

    Example:
    1. import scala.collection.immutable.TreeMap
      
      // Make a TreeMap via the companion object factory
      val weekdays = TreeMap(
        2 -> "Monday",
        3 -> "Tuesday",
        4 -> "Wednesday",
        5 -> "Thursday",
        6 -> "Friday"
      )
      // TreeMap(2 -> Monday, 3 -> Tuesday, 4 -> Wednesday, 5 -> Thursday, 6 -> Friday)
      
      val days = weekdays ++ List(1 -> "Sunday", 7 -> "Saturday")
      // TreeMap(1 -> Sunday, 2 -> Monday, 3 -> Tuesday, 4 -> Wednesday, 5 -> Thursday, 6 -> Friday, 7 -> Saturday)
      
      val day3 = days.get(3) // Some("Tuesday")
      
      val rangeOfDays = days.range(2, 5) // TreeMap(2 -> Monday, 3 -> Tuesday, 4 -> Wednesday)
      
      val daysUntil2 = days.rangeUntil(2) // TreeMap(1 -> Sunday)
      val daysTo2 = days.rangeTo(2) // TreeMap(1 -> Sunday, 2 -> Monday)
      val daysAfter5 = days.rangeFrom(5) //  TreeMap(5 -> Thursday, 6 -> Friday, 7 -> Saturday)
    See also

    "Scala's Collection Library overview" section on Red-Black Trees for more information.

  42. final class TreeSeqMap[K, +V] extends AbstractMap[K, V] with SeqMap[K, V] with MapOps[K, V, TreeSeqMap, TreeSeqMap[K, V]] with StrictOptimizedIterableOps[(K, V), Iterable, TreeSeqMap[K, V]] with StrictOptimizedMapOps[K, V, TreeSeqMap, TreeSeqMap[K, V]] with MapFactoryDefaults[K, V, TreeSeqMap, Iterable]

    This class implements an immutable map that preserves order using a hash map for the key to value mapping to provide efficient lookup, and a tree for the ordering of the keys to provide efficient insertion/modification order traversal and destructuring.

    This class implements an immutable map that preserves order using a hash map for the key to value mapping to provide efficient lookup, and a tree for the ordering of the keys to provide efficient insertion/modification order traversal and destructuring.

    By default insertion order (TreeSeqMap.OrderBy.Insertion) is used, but modification order (TreeSeqMap.OrderBy.Modification) can be used instead if so specified at creation.

    The orderingBy(orderBy: TreeSeqMap.OrderBy): TreeSeqMap[K, V] method can be used to switch to the specified ordering for the returned map.

    A key can be manually refreshed (i.e. placed at the end) via the refresh(key: K): TreeSeqMap[K, V] method (regardless of the ordering in use).

    Internally, an ordinal counter is increased for each insertion/modification and then the current ordinal is used as key in the tree map. After 232 insertions/modifications the entire map is copied (thus resetting the ordinal counter).

    K

    the type of the keys contained in this map.

    V

    the type of the values associated with the keys in this map.

  43. final class TreeSet[A] extends AbstractSet[A] with SortedSet[A] with SortedSetOps[A, TreeSet, TreeSet[A]] with StrictOptimizedSortedSetOps[A, TreeSet, TreeSet[A]] with SortedSetFactoryDefaults[A, TreeSet, Set] with DefaultSerializable

    This class implements immutable sorted sets using a tree.

    This class implements immutable sorted sets using a tree.

    A

    the type of the elements contained in this tree set

    See also

    "Scala's Collection Library overview" section on Red-Black Trees for more information.

  44. sealed abstract class Vector[+A] extends AbstractSeq[A] with IndexedSeq[A] with IndexedSeqOps[A, Vector, Vector[A]] with StrictOptimizedSeqOps[A, Vector, Vector[A]] with IterableFactoryDefaults[A, Vector] with DefaultSerializable

    Vector is a general-purpose, immutable data structure.

    Vector is a general-purpose, immutable data structure. It provides random access and updates in O(log n) time, as well as very fast append/prepend/tail/init (amortized O(1), worst case O(log n)). Because vectors strike a good balance between fast random selections and fast random functional updates, they are currently the default implementation of immutable indexed sequences.

    Vectors are implemented by radix-balanced finger trees of width 32. There is a separate subclass for each level (0 to 6, with 0 being the empty vector and 6 a tree with a maximum width of 64 at the top level).

    Tree balancing: - Only the first dimension of an array may have a size < WIDTH - In a data (central) array the first dimension may be up to WIDTH-2 long, in prefix1 and suffix1 up to WIDTH, and in other prefix and suffix arrays up to WIDTH-1 - prefix1 and suffix1 are never empty - Balancing does not cross the main data array (i.e. prepending never touches the suffix and appending never touches the prefix). The level is increased/decreased when the affected side plus main data is already full/empty - All arrays are left-aligned and truncated

    In addition to the data slices (prefix1, prefix2, ..., dataN, ..., suffix2, suffix1) we store a running count of elements after each prefix for more efficient indexing without having to dereference all prefix arrays.

  45. final class VectorBuilder[A] extends ReusableBuilder[A, Vector[A]]
  46. final class VectorMap[K, +V] extends AbstractMap[K, V] with SeqMap[K, V] with StrictOptimizedMapOps[K, V, VectorMap, VectorMap[K, V]] with MapFactoryDefaults[K, V, VectorMap, Iterable]

    This class implements immutable maps using a vector/map-based data structure, which preserves insertion order.

    This class implements immutable maps using a vector/map-based data structure, which preserves insertion order.

    Unlike ListMap, VectorMap has amortized effectively constant lookup at the expense of using extra memory and generally lower performance for other operations

    K

    the type of the keys contained in this vector map.

    V

    the type of the values associated with the keys in this vector map.

  47. final class WrappedString extends AbstractSeq[Char] with IndexedSeq[Char] with IndexedSeqOps[Char, IndexedSeq, WrappedString] with Serializable

    This class serves as a wrapper augmenting Strings with all the operations found in indexed sequences.

    This class serves as a wrapper augmenting Strings with all the operations found in indexed sequences.

    The difference between this class and StringOps is that calling transformer methods such as filter and map will yield an object of type WrappedString rather than a String.

    Annotations
    @SerialVersionUID()

Deprecated Type Members

  1. type DefaultMap[K, +V] = Map[K, V]
    Annotations
    @deprecated
    Deprecated

    (Since version 2.13.0) Use Map instead of DefaultMap

  2. sealed abstract class Stream[+A] extends AbstractSeq[A] with LinearSeq[A] with LinearSeqOps[A, Stream, Stream[A]] with IterableFactoryDefaults[A, Stream] with Serializable
    Annotations
    @deprecated @SerialVersionUID()
    Deprecated

    (Since version 2.13.0) Use LazyList (which is fully lazy) instead of Stream (which has a lazy tail only)

  3. type Traversable[+X] = Iterable[X]
    Annotations
    @deprecated
    Deprecated

    (Since version 2.13.0) Use Iterable instead of Traversable

Value Members

  1. val StringOps: collection.StringOps.type
  2. val StringView: collection.StringView.type
  3. object ArraySeq extends StrictOptimizedClassTagSeqFactory[ArraySeq]

    This object provides a set of operations to create ArraySeq values.

    This object provides a set of operations to create ArraySeq values.

    Annotations
    @SerialVersionUID()
  4. object BitSet extends SpecificIterableFactory[Int, BitSet] with java.io.Serializable

    This object provides a set of operations to create immutable.BitSet values.

    This object provides a set of operations to create immutable.BitSet values.

    Annotations
    @nowarn() @SerialVersionUID()
  5. object HashMap extends MapFactory[HashMap]

    This object provides a set of operations to create immutable.HashMap values.

    This object provides a set of operations to create immutable.HashMap values.

    Annotations
    @SerialVersionUID()
  6. object HashSet extends IterableFactory[HashSet]

    This object provides a set of operations to create immutable.HashSet values.

    This object provides a set of operations to create immutable.HashSet values.

    Annotations
    @SerialVersionUID()
  7. object IndexedSeq extends Delegate[IndexedSeq]
    Annotations
    @SerialVersionUID()
  8. object IndexedSeqDefaults
  9. object IntMap extends java.io.Serializable

    A companion object for integer maps.

  10. object Iterable extends Delegate[Iterable]
    Annotations
    @SerialVersionUID()
  11. object LazyList extends SeqFactory[LazyList]

    This object provides a set of operations to create LazyList values.

    This object provides a set of operations to create LazyList values.

    Annotations
    @SerialVersionUID()
  12. object LinearSeq extends Delegate[LinearSeq]
    Annotations
    @SerialVersionUID()
  13. object List extends StrictOptimizedSeqFactory[List]

    This object provides a set of operations to create List values.

    This object provides a set of operations to create List values.

    Annotations
    @SerialVersionUID()
  14. object ListMap extends MapFactory[ListMap]

    This object provides a set of operations to create ListMap values.

    This object provides a set of operations to create ListMap values.

    Note that each element insertion takes O(n) time, which means that creating a list map with n elements will take O(n2) time. This makes the builder suitable only for a small number of elements.

    Annotations
    @SerialVersionUID()
    See also

    "Scala's Collection Library overview" section on List Maps for more information.

  15. object ListSet extends IterableFactory[ListSet]

    This object provides a set of operations to create ListSet values.

    This object provides a set of operations to create ListSet values.

    Note that each element insertion takes O(n) time, which means that creating a list set with n elements will take O(n2) time. This makes the builder suitable only for a small number of elements.

    Annotations
    @SerialVersionUID()
  16. object LongMap extends java.io.Serializable

    A companion object for long maps.

  17. object Map extends MapFactory[Map]

    This object provides a set of operations to create immutable.Map values.

    This object provides a set of operations to create immutable.Map values.

    Annotations
    @SerialVersionUID()
  18. case object Nil extends List[Nothing] with Product with Serializable
  19. object NumericRange extends java.io.Serializable

    A companion object for numeric ranges.

  20. object Queue extends StrictOptimizedSeqFactory[Queue]

    This object provides a set of operations to create immutable.Queue values.

    This object provides a set of operations to create immutable.Queue values.

    Annotations
    @SerialVersionUID()
  21. object Range extends java.io.Serializable

    Companion object for ranges.

  22. object Seq extends Delegate[Seq]

    This object provides a set of operations to create immutable.Seq values.

    This object provides a set of operations to create immutable.Seq values.

    Annotations
    @SerialVersionUID()
  23. object SeqMap extends MapFactory[SeqMap]
  24. object Set extends IterableFactory[Set]

    This object provides a set of operations to create immutable.Set values.

    This object provides a set of operations to create immutable.Set values.

    Annotations
    @SerialVersionUID()
  25. object SortedMap extends Delegate[SortedMap]
    Annotations
    @SerialVersionUID()
  26. object SortedSet extends Delegate[SortedSet]

    This object provides a set of operations to create immutable.SortedSet values.

    This object provides a set of operations to create immutable.SortedSet values.

    Annotations
    @SerialVersionUID()
  27. object TreeMap extends SortedMapFactory[TreeMap]

    This object provides a set of operations to create immutable.TreeMap values.

    This object provides a set of operations to create immutable.TreeMap values.

    Annotations
    @SerialVersionUID()
  28. object TreeSeqMap extends MapFactory[TreeSeqMap]
  29. object TreeSet extends SortedIterableFactory[TreeSet]

    This object provides a set of operations to create immutable.TreeSet values.

    This object provides a set of operations to create immutable.TreeSet values.

    Annotations
    @SerialVersionUID()
  30. object Vector extends StrictOptimizedSeqFactory[Vector]

    This object provides a set of operations to create Vector values.

    This object provides a set of operations to create Vector values.

    Annotations
    @SerialVersionUID()
  31. object VectorMap extends MapFactory[VectorMap]
  32. object WrappedString extends SpecificIterableFactory[Char, WrappedString] with java.io.Serializable

    A companion object for wrapped strings.

    A companion object for wrapped strings.

    Annotations
    @SerialVersionUID()

Deprecated Value Members

  1. val Traversable: Iterable.type
    Annotations
    @deprecated
    Deprecated

    (Since version 2.13.0) Use Iterable instead of Traversable

  2. object Stream extends SeqFactory[Stream]
    Annotations
    @deprecated @SerialVersionUID()
    Deprecated

    (Since version 2.13.0) Use LazyList (which is fully lazy) instead of Stream (which has a lazy tail only)

Inherited from AnyRef

Inherited from Any

Ungrouped