Packages

final class BigDecimal extends ScalaNumber with ScalaNumericConversions with Serializable with Ordered[BigDecimal]

BigDecimal represents decimal floating-point numbers of arbitrary precision. By default, the precision approximately matches that of IEEE 128-bit floating point numbers (34 decimal digits, HALF_EVEN rounding mode). Within the range of IEEE binary128 numbers, BigDecimal will agree with BigInt for both equality and hash codes (and will agree with primitive types as well). Beyond that range--numbers with more than 4934 digits when written out in full--the hashCode of BigInt and BigDecimal is allowed to diverge due to difficulty in efficiently computing both the decimal representation in BigDecimal and the binary representation in BigInt.

When creating a BigDecimal from a Double or Float, care must be taken as the binary fraction representation of Double and Float does not easily convert into a decimal representation. Three explicit schemes are available for conversion. BigDecimal.decimal will convert the floating-point number to a decimal text representation, and build a BigDecimal based on that. BigDecimal.binary will expand the binary fraction to the requested or default precision. BigDecimal.exact will expand the binary fraction to the full number of digits, thus producing the exact decimal value corresponding to the binary fraction of that floating-point number. BigDecimal equality matches the decimal expansion of Double: BigDecimal.decimal(0.1) == 0.1. Note that since 0.1f != 0.1, the same is not true for Float. Instead, 0.1f == BigDecimal.decimal((0.1f).toDouble).

To test whether a BigDecimal number can be converted to a Double or Float and then back without loss of information by using one of these methods, test with isDecimalDouble, isBinaryDouble, or isExactDouble or the corresponding Float versions. Note that BigInt's isValidDouble will agree with isExactDouble, not the isDecimalDouble used by default.

BigDecimal uses the decimal representation of binary floating-point numbers to determine equality and hash codes. This yields different answers than conversion between Long and Double values, where the exact form is used. As always, since floating-point is a lossy representation, it is advisable to take care when assuming identity will be maintained across multiple conversions.

BigDecimal maintains a MathContext that determines the rounding that is applied to certain calculations. In most cases, the value of the BigDecimal is also rounded to the precision specified by the MathContext. To create a BigDecimal with a different precision than its MathContext, use new BigDecimal(new java.math.BigDecimal(...), mc). Rounding will be applied on those mathematical operations that can dramatically change the number of digits in a full representation, namely multiplication, division, and powers. The left-hand argument's MathContext always determines the degree of rounding, if any, and is the one propagated through arithmetic operations that do not apply rounding themselves.

Source
BigDecimal.scala
Type Hierarchy
Ordering
  1. Alphabetic
  2. By Inheritance
Inherited
  1. BigDecimal
  2. Ordered
  3. Comparable
  4. ScalaNumericConversions
  5. ScalaNumericAnyConversions
  6. ScalaNumber
  7. Number
  8. Serializable
  9. AnyRef
  10. Any
Implicitly
  1. by orderingToOrdered
  2. by any2stringadd
  3. by StringFormat
  4. by Ensuring
  5. by ArrowAssoc
  1. Hide All
  2. Show All
Visibility
  1. Public
  2. Protected

Instance Constructors

  1. new BigDecimal(bigDecimal: java.math.BigDecimal)
  2. new BigDecimal(bigDecimal: java.math.BigDecimal, mc: MathContext)

Value Members

  1. final def !=(arg0: Any): Boolean

    Test two objects for inequality.

    Test two objects for inequality.

    returns

    true if !(this == that), false otherwise.

    Definition Classes
    AnyRef → Any
  2. final def ##: Int

    Equivalent to x.hashCode except for boxed numeric types and null.

    Equivalent to x.hashCode except for boxed numeric types and null. For numerics, it returns a hash value which is consistent with value equality: if two value type instances compare as true, then ## will produce the same hash value for each of them. For null returns a hashcode where null.hashCode throws a NullPointerException.

    returns

    a hash value consistent with ==

    Definition Classes
    AnyRef → Any
  3. def %(that: BigDecimal): BigDecimal

    Remainder after dividing this by that.

  4. def *(that: BigDecimal): BigDecimal

    Multiplication of BigDecimals

  5. def +(that: BigDecimal): BigDecimal

    Addition of BigDecimals

  6. def -(that: BigDecimal): BigDecimal

    Subtraction of BigDecimals

  7. def ->[B](y: B): (BigDecimal, B)
    Implicit
    This member is added by an implicit conversion from BigDecimal toArrowAssoc[BigDecimal] performed by method ArrowAssoc in scala.Predef.
    Definition Classes
    ArrowAssoc
    Annotations
    @inline()
  8. def /(that: BigDecimal): BigDecimal

    Division of BigDecimals

  9. def /%(that: BigDecimal): (BigDecimal, BigDecimal)

    Division and Remainder - returns tuple containing the result of divideToIntegralValue and the remainder.

    Division and Remainder - returns tuple containing the result of divideToIntegralValue and the remainder. The computation is exact: no rounding is applied.

  10. def <(that: BigDecimal): Boolean

    Returns true if this is less than that

    Returns true if this is less than that

    Definition Classes
    Ordered
  11. def <=(that: BigDecimal): Boolean

    Returns true if this is less than or equal to that.

    Returns true if this is less than or equal to that.

    Definition Classes
    Ordered
  12. final def ==(arg0: Any): Boolean

    The expression x == that is equivalent to if (x eq null) that eq null else x.equals(that).

    The expression x == that is equivalent to if (x eq null) that eq null else x.equals(that).

    returns

    true if the receiver object is equivalent to the argument; false otherwise.

    Definition Classes
    AnyRef → Any
  13. def >(that: BigDecimal): Boolean

    Returns true if this is greater than that.

    Returns true if this is greater than that.

    Definition Classes
    Ordered
  14. def >=(that: BigDecimal): Boolean

    Returns true if this is greater than or equal to that.

    Returns true if this is greater than or equal to that.

    Definition Classes
    Ordered
  15. def abs: BigDecimal

    Returns the absolute value of this BigDecimal

  16. def apply(mc: MathContext): BigDecimal

    Returns a new BigDecimal based on the supplied MathContext, rounded as needed.

  17. final def asInstanceOf[T0]: T0

    Forces the compiler to treat the receiver object as having type T0, even though doing so may violate type safety.

    Forces the compiler to treat the receiver object as having type T0, even though doing so may violate type safety.

    This method is useful when you believe you have type information the compiler doesn't, and it also isn't possible to check the type at runtime. In such situations, skipping type safety is the only option.

    It is platform dependent whether asInstanceOf has any effect at runtime. It might do a runtime type test on the erasure of T0, insert a conversion (such as boxing/unboxing), fill in a default value, or do nothing at all.

    In particular, asInstanceOf is not a type test. It does **not** mean:

    this match {
     case x: T0 => x
     case _     => throw ClassCastException("...")

    Use pattern matching or isInstanceOf for type testing instead.

    Situations where asInstanceOf is useful:

    • when flow analysis fails to deduce T0 automatically
    • when down-casting a type parameter or an abstract type member (which cannot be checked at runtime due to type erasure) If there is any doubt and you are able to type test instead, you should do so.

    Be careful of using asInstanceOf when T0 is a primitive type. When T0 is primitive, asInstanceOf may insert a conversion instead of a type test. If your intent is to convert, use a toT method (x.toChar, x.toByte, etc.).

    returns

    the receiver object.

    Definition Classes
    Any
    Exceptions thrown

    ClassCastException if the receiver is not an instance of the erasure of T0, if that can be checked on this platform

  18. val bigDecimal: java.math.BigDecimal
  19. def byteValue: Byte

    Converts this BigDecimal to a Byte.

    Converts this BigDecimal to a Byte. If the BigDecimal is too big to fit in a Byte, only the low-order 8 bits are returned. Note that this conversion can lose information about the overall magnitude of the BigDecimal value as well as return a result with the opposite sign.

    Definition Classes
    BigDecimalScalaNumericAnyConversions → Number
  20. def charValue: Char

    Converts this BigDecimal to a Char.

    Converts this BigDecimal to a Char. If the BigDecimal is too big to fit in a Char, only the low-order 16 bits are returned. Note that this conversion can lose information about the overall magnitude of the BigDecimal value and that it always returns a positive result.

  21. def clone(): AnyRef

    Create a copy of the receiver object.

    Create a copy of the receiver object.

    The default implementation of the clone method is platform dependent.

    returns

    a copy of the receiver object.

    Attributes
    protected[lang]
    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.CloneNotSupportedException]) @native()
    Note

    not specified by SLS as a member of AnyRef

  22. def compare(that: BigDecimal): Int

    Compares this BigDecimal with the specified BigDecimal

    Compares this BigDecimal with the specified BigDecimal

    Definition Classes
    BigDecimalOrdered
  23. def compareTo(that: BigDecimal): Int

    Result of comparing this with operand that.

    Result of comparing this with operand that.

    Definition Classes
    Ordered → Comparable
  24. def doubleValue: Double

    Converts this BigDecimal to a Double.

    Converts this BigDecimal to a Double. if this BigDecimal has too great a magnitude to represent as a double, it will be converted to Double.NEGATIVE_INFINITY or Double.POSITIVE_INFINITY as appropriate.

    Definition Classes
    BigDecimalScalaNumericAnyConversions → Number
  25. def ensuring(cond: (BigDecimal) => Boolean, msg: => Any): BigDecimal
    Implicit
    This member is added by an implicit conversion from BigDecimal toEnsuring[BigDecimal] performed by method Ensuring in scala.Predef.
    Definition Classes
    Ensuring
  26. def ensuring(cond: (BigDecimal) => Boolean): BigDecimal
    Implicit
    This member is added by an implicit conversion from BigDecimal toEnsuring[BigDecimal] performed by method Ensuring in scala.Predef.
    Definition Classes
    Ensuring
  27. def ensuring(cond: Boolean, msg: => Any): BigDecimal
    Implicit
    This member is added by an implicit conversion from BigDecimal toEnsuring[BigDecimal] performed by method Ensuring in scala.Predef.
    Definition Classes
    Ensuring
  28. def ensuring(cond: Boolean): BigDecimal
    Implicit
    This member is added by an implicit conversion from BigDecimal toEnsuring[BigDecimal] performed by method Ensuring in scala.Predef.
    Definition Classes
    Ensuring
  29. final def eq(arg0: AnyRef): Boolean

    Tests whether the argument (that) is a reference to the receiver object (this).

    Tests whether the argument (that) is a reference to the receiver object (this).

    The eq method implements an equivalence relation on non-null instances of AnyRef, and has three additional properties:

    • It is consistent: for any non-null instances x and y of type AnyRef, multiple invocations of x.eq(y) consistently returns true or consistently returns false.
    • For any non-null instance x of type AnyRef, x.eq(null) and null.eq(x) returns false.
    • null.eq(null) returns true.

    When overriding the equals or hashCode methods, it is important to ensure that their behavior is consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2), they should be equal to each other (o1 == o2) and they should hash to the same value (o1.hashCode == o2.hashCode).

    returns

    true if the argument is a reference to the receiver object; false otherwise.

    Definition Classes
    AnyRef
  30. def equals(that: BigDecimal): Boolean

    Compares this BigDecimal with the specified BigDecimal for equality.

  31. def equals(that: Any): Boolean

    Compares this BigDecimal with the specified value for equality.

    Compares this BigDecimal with the specified value for equality. Where Float and Double disagree, BigDecimal will agree with the Double value

    that

    the object to compare against this object for equality.

    returns

    true if the receiver object is equivalent to the argument; false otherwise.

    Definition Classes
    BigDecimal → AnyRef → Any
  32. def finalize(): Unit

    Called by the garbage collector on the receiver object when there are no more references to the object.

    Called by the garbage collector on the receiver object when there are no more references to the object.

    The details of when and if the finalize method is invoked, as well as the interaction between finalize and non-local returns and exceptions, are all platform dependent.

    Attributes
    protected[lang]
    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.Throwable])
    Note

    not specified by SLS as a member of AnyRef

  33. def floatValue: Float

    Converts this BigDecimal to a Float.

    Converts this BigDecimal to a Float. if this BigDecimal has too great a magnitude to represent as a float, it will be converted to Float.NEGATIVE_INFINITY or Float.POSITIVE_INFINITY as appropriate.

    Definition Classes
    BigDecimalScalaNumericAnyConversions → Number
  34. final def getClass(): Class[_ <: AnyRef]

    Returns the runtime class representation of the object.

    Returns the runtime class representation of the object.

    returns

    a class object corresponding to the runtime type of the receiver.

    Definition Classes
    AnyRef → Any
    Annotations
    @native()
  35. def hashCode(): Int

    Returns the hash code for this BigDecimal.

    Returns the hash code for this BigDecimal. Note that this does not merely use the underlying java object's hashCode because we compare BigDecimals with compareTo which deems 2 == 2.00, whereas in java these are unequal with unequal hashCodes. These hash codes agree with BigInt for whole numbers up ~4934 digits (the range of IEEE 128 bit floating point). Beyond this, hash codes will disagree; this prevents the explicit representation of the BigInt form for BigDecimal values with large exponents.

    returns

    the hash code value for this object.

    Definition Classes
    BigDecimal → AnyRef → Any
  36. def intValue: Int

    Converts this BigDecimal to an Int.

    Converts this BigDecimal to an Int. If the BigDecimal is too big to fit in an Int, only the low-order 32 bits are returned. Note that this conversion can lose information about the overall magnitude of the BigDecimal value as well as return a result with the opposite sign.

    Definition Classes
    BigDecimalScalaNumericAnyConversions → Number
  37. def isBinaryDouble: Boolean

    Tests whether this BigDecimal holds, to within precision, the binary representation of a Double.

  38. def isBinaryFloat: Boolean

    Tests whether this BigDecimal holds, to within precision, the binary representation of a Float.

  39. def isDecimalDouble: Boolean

    Tests whether this BigDecimal holds the decimal representation of a Double.

  40. def isDecimalFloat: Boolean

    Tests whether this BigDecimal holds the decimal representation of a Float.

  41. def isExactDouble: Boolean

    Tests whether this BigDecimal holds the exact expansion of a Double's binary fractional form into base 10.

  42. def isExactFloat: Boolean

    Tests whether this BigDecimal holds the exact expansion of a Float's binary fractional form into base 10.

  43. final def isInstanceOf[T0]: Boolean

    Test whether the dynamic type of the receiver object has the same erasure as T0.

    Test whether the dynamic type of the receiver object has the same erasure as T0.

    Depending on what T0 is, the test is done in one of the below ways:

    • T0 is a non-parameterized class type, e.g. BigDecimal: this method returns true if the value of the receiver object is a BigDecimal or a subtype of BigDecimal.
    • T0 is a parameterized class type, e.g. List[Int]: this method returns true if the value of the receiver object is some List[X] for any X. For example, List(1, 2, 3).isInstanceOf[List[String]] will return true.
    • T0 is some singleton type x.type or literal x: this method returns this.eq(x). For example, x.isInstanceOf[1] is equivalent to x.eq(1)
    • T0 is an intersection X with Y or X & Y: this method is equivalent to x.isInstanceOf[X] && x.isInstanceOf[Y]
    • T0 is a union X | Y: this method is equivalent to x.isInstanceOf[X] || x.isInstanceOf[Y]
    • T0 is a type parameter or an abstract type member: this method is equivalent to isInstanceOf[U] where U is T0's upper bound, Any if T0 is unbounded. For example, x.isInstanceOf[A] where A is an unbounded type parameter will return true for any value of x.

    This is exactly equivalent to the type pattern _: T0

    returns

    true if the receiver object is an instance of erasure of type T0; false otherwise.

    Definition Classes
    Any
    Note

    due to the unexpectedness of List(1, 2, 3).isInstanceOf[List[String]] returning true and x.isInstanceOf[A] where A is a type parameter or abstract member returning true, these forms issue a warning.

  44. def isValidByte: Boolean

    Returns true iff this has a zero fractional part, and is within the range of scala.Byte MinValue and MaxValue; otherwise returns false.

    Returns true iff this has a zero fractional part, and is within the range of scala.Byte MinValue and MaxValue; otherwise returns false.

    Definition Classes
    BigDecimalScalaNumericAnyConversions
  45. def isValidChar: Boolean

    Returns true iff this has a zero fractional part, and is within the range of scala.Char MinValue and MaxValue; otherwise returns false.

    Returns true iff this has a zero fractional part, and is within the range of scala.Char MinValue and MaxValue; otherwise returns false.

    Definition Classes
    BigDecimalScalaNumericAnyConversions
  46. def isValidInt: Boolean

    Returns true iff this has a zero fractional part, and is within the range of scala.Int MinValue and MaxValue; otherwise returns false.

    Returns true iff this has a zero fractional part, and is within the range of scala.Int MinValue and MaxValue; otherwise returns false.

    Definition Classes
    BigDecimalScalaNumericAnyConversions
  47. def isValidLong: Boolean
  48. def isValidShort: Boolean

    Returns true iff this has a zero fractional part, and is within the range of scala.Short MinValue and MaxValue; otherwise returns false.

    Returns true iff this has a zero fractional part, and is within the range of scala.Short MinValue and MaxValue; otherwise returns false.

    Definition Classes
    BigDecimalScalaNumericAnyConversions
  49. def isWhole: Boolean

    returns

    true if this number has no decimal component, false otherwise.

    Definition Classes
    BigDecimalScalaNumericAnyConversions → ScalaNumber
  50. def longValue: Long

    Converts this BigDecimal to a Long.

    Converts this BigDecimal to a Long. If the BigDecimal is too big to fit in a Long, only the low-order 64 bits are returned. Note that this conversion can lose information about the overall magnitude of the BigDecimal value as well as return a result with the opposite sign.

    Definition Classes
    BigDecimalScalaNumericAnyConversions → Number
  51. def max(that: BigDecimal): BigDecimal

    Returns the maximum of this and that, or this if the two are equal

  52. val mc: MathContext
  53. def min(that: BigDecimal): BigDecimal

    Returns the minimum of this and that, or this if the two are equal

  54. final def ne(arg0: AnyRef): Boolean

    Equivalent to !(this eq that).

    Equivalent to !(this eq that).

    returns

    true if the argument is not a reference to the receiver object; false otherwise.

    Definition Classes
    AnyRef
  55. final def notify(): Unit

    Wakes up a single thread that is waiting on the receiver object's monitor.

    Wakes up a single thread that is waiting on the receiver object's monitor.

    Definition Classes
    AnyRef
    Annotations
    @native()
    Note

    not specified by SLS as a member of AnyRef

  56. final def notifyAll(): Unit

    Wakes up all threads that are waiting on the receiver object's monitor.

    Wakes up all threads that are waiting on the receiver object's monitor.

    Definition Classes
    AnyRef
    Annotations
    @native()
    Note

    not specified by SLS as a member of AnyRef

  57. def pow(n: Int): BigDecimal

    Returns a BigDecimal whose value is this ** n.

  58. def precision: Int

    Returns the precision of this BigDecimal.

  59. def quot(that: BigDecimal): BigDecimal

    Divide to Integral value.

  60. def remainder(that: BigDecimal): BigDecimal

    Remainder after dividing this by that.

  61. def round(mc: MathContext): BigDecimal

    Returns a BigDecimal rounded according to the supplied MathContext settings, but preserving its own MathContext for future operations.

  62. def rounded: BigDecimal

    Returns a BigDecimal rounded according to its own MathContext

  63. def scale: Int

    Returns the scale of this BigDecimal.

  64. def setScale(scale: Int, mode: RoundingMode): BigDecimal
  65. def setScale(scale: Int): BigDecimal

    Returns a BigDecimal whose scale is the specified value, and whose value is numerically equal to this BigDecimal's.

  66. def shortValue: Short

    Converts this BigDecimal to a Short.

    Converts this BigDecimal to a Short. If the BigDecimal is too big to fit in a Short, only the low-order 16 bits are returned. Note that this conversion can lose information about the overall magnitude of the BigDecimal value as well as return a result with the opposite sign.

    Definition Classes
    BigDecimalScalaNumericAnyConversions → Number
  67. def sign: BigDecimal

    Returns the sign of this BigDecimal; -1 if it is less than 0, +1 if it is greater than 0, 0 if it is equal to 0.

  68. def signum: Int

    Returns the sign of this BigDecimal; -1 if it is less than 0, +1 if it is greater than 0, 0 if it is equal to 0.

  69. final def synchronized[T0](arg0: => T0): T0

    Executes the code in body with an exclusive lock on this.

    Executes the code in body with an exclusive lock on this.

    returns

    the result of body

    Definition Classes
    AnyRef
  70. def to(end: BigDecimal, step: BigDecimal): Inclusive[scala.BigDecimal]

    Like until, but inclusive of the end value.

  71. def to(end: BigDecimal): Partial[BigDecimal, Inclusive[BigDecimal]]

    Like until, but inclusive of the end value.

  72. def toBigInt: BigInt

    Converts this BigDecimal to a scala.BigInt.

  73. def toBigIntExact: Option[BigInt]

    Converts this BigDecimal to a scala.BigInt if it can be done losslessly, returning Some(BigInt) or None.

  74. def toByte: Byte

    Returns the value of this as a scala.Byte.

    Returns the value of this as a scala.Byte. This may involve rounding or truncation.

    Definition Classes
    ScalaNumericAnyConversions
  75. def toByteExact: Byte

    Converts this BigDecimal to a scala.Byte, checking for lost information.

    Converts this BigDecimal to a scala.Byte, checking for lost information. If this BigDecimal has a nonzero fractional part, or is out of the possible range for a scala.Byte result, then a java.lang.ArithmeticException is thrown.

  76. def toChar: Char

    Returns the value of this as a scala.Char.

    Returns the value of this as a scala.Char. This may involve rounding or truncation.

    Definition Classes
    ScalaNumericAnyConversions
  77. def toDouble: Double

    Returns the value of this as a scala.Double.

    Returns the value of this as a scala.Double. This may involve rounding or truncation.

    Definition Classes
    ScalaNumericAnyConversions
  78. def toFloat: Float

    Returns the value of this as a scala.Float.

    Returns the value of this as a scala.Float. This may involve rounding or truncation.

    Definition Classes
    ScalaNumericAnyConversions
  79. def toInt: Int

    Returns the value of this as an scala.Int.

    Returns the value of this as an scala.Int. This may involve rounding or truncation.

    Definition Classes
    ScalaNumericAnyConversions
  80. def toIntExact: Int

    Converts this BigDecimal to a scala.Int, checking for lost information.

    Converts this BigDecimal to a scala.Int, checking for lost information. If this BigDecimal has a nonzero fractional part, or is out of the possible range for an scala.Int result, then a java.lang.ArithmeticException is thrown.

  81. def toLong: Long

    Returns the value of this as a scala.Long.

    Returns the value of this as a scala.Long. This may involve rounding or truncation.

    Definition Classes
    ScalaNumericAnyConversions
  82. def toLongExact: Long

    Converts this BigDecimal to a scala.Long, checking for lost information.

    Converts this BigDecimal to a scala.Long, checking for lost information. If this BigDecimal has a nonzero fractional part, or is out of the possible range for a scala.Long result, then a java.lang.ArithmeticException is thrown.

  83. def toShort: Short

    Returns the value of this as a scala.Short.

    Returns the value of this as a scala.Short. This may involve rounding or truncation.

    Definition Classes
    ScalaNumericAnyConversions
  84. def toShortExact: Short

    Converts this BigDecimal to a scala.Short, checking for lost information.

    Converts this BigDecimal to a scala.Short, checking for lost information. If this BigDecimal has a nonzero fractional part, or is out of the possible range for a scala.Short result, then a java.lang.ArithmeticException is thrown.

  85. def toString(): String

    Returns the decimal String representation of this BigDecimal.

    Returns the decimal String representation of this BigDecimal.

    returns

    a String representation of the object.

    Definition Classes
    BigDecimal → AnyRef → Any
  86. def ulp: BigDecimal

    Returns the size of an ulp, a unit in the last place, of this BigDecimal.

  87. def unary_-: BigDecimal

    Returns a BigDecimal whose value is the negation of this BigDecimal

  88. def underlying(): java.math.BigDecimal
    Definition Classes
    BigDecimalScalaNumericConversions → ScalaNumber
  89. def unifiedPrimitiveEquals(x: Any): Boolean

    Should only be called after all known non-primitive types have been excluded.

    Should only be called after all known non-primitive types have been excluded. This method won't dispatch anywhere else after checking against the primitives to avoid infinite recursion between equals and this on unknown "Number" variants.

    Additionally, this should only be called if the numeric type is happy to be converted to Long, Float, and Double. If for instance a BigInt much larger than the Long range is sent here, it will claim equality with whatever Long is left in its lower 64 bits. Or a BigDecimal with more precision than Double can hold: same thing. There's no way given the interface available here to prevent this error.

    Attributes
    protected
    Definition Classes
    ScalaNumericAnyConversions
  90. def unifiedPrimitiveHashcode: Int
    Attributes
    protected
    Definition Classes
    ScalaNumericAnyConversions
  91. def until(end: BigDecimal, step: BigDecimal): Exclusive[BigDecimal]

    Same as the one-argument until, but creates the range immediately.

  92. def until(end: BigDecimal): Partial[BigDecimal, Exclusive[BigDecimal]]

    Creates a partially constructed NumericRange[BigDecimal] in range [start;end), where start is the target BigDecimal.

    Creates a partially constructed NumericRange[BigDecimal] in range [start;end), where start is the target BigDecimal. The step must be supplied via the "by" method of the returned object in order to receive the fully constructed range. For example:

    val partial = BigDecimal(1.0) to 2.0       // not usable yet
    val range = partial by 0.01                // now a NumericRange
    val range2 = BigDecimal(0) to 1.0 by 0.01  // all at once of course is fine too
    end

    the end value of the range (exclusive)

    returns

    the partially constructed NumericRange

  93. final def wait(): Unit

    See https://docs.oracle.com/javase/8/docs/api/java/lang/Object.html#wait--.

    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.InterruptedException])
    Note

    not specified by SLS as a member of AnyRef

  94. final def wait(arg0: Long, arg1: Int): Unit

    See https://docs.oracle.com/javase/8/docs/api/java/lang/Object.html#wait-long-int-

    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.InterruptedException])
    Note

    not specified by SLS as a member of AnyRef

  95. final def wait(arg0: Long): Unit

    See https://docs.oracle.com/javase/8/docs/api/java/lang/Object.html#wait-long-.

    Definition Classes
    AnyRef
    Annotations
    @throws(classOf[java.lang.InterruptedException]) @native()
    Note

    not specified by SLS as a member of AnyRef

Shadowed Implicit Value Members

  1. def +(other: String): String
    Implicit
    This member is added by an implicit conversion from BigDecimal toany2stringadd[BigDecimal] performed by method any2stringadd in scala.Predef.
    Shadowing
    This implicitly inherited member is shadowed by one or more members in this class.
    To access this member you can use a type ascription:
    (bigDecimal: any2stringadd[BigDecimal]).+(other)
    Definition Classes
    any2stringadd
  2. def <(that: BigDecimal): Boolean

    Returns true if this is less than that

    Returns true if this is less than that

    Implicit
    This member is added by an implicit conversion from BigDecimal toOrdered[BigDecimal] performed by method orderingToOrdered in scala.math.Ordered.
    Shadowing
    This implicitly inherited member is shadowed by one or more members in this class.
    To access this member you can use a type ascription:
    (bigDecimal: Ordered[BigDecimal]).<(that)
    Definition Classes
    Ordered
  3. def <=(that: BigDecimal): Boolean

    Returns true if this is less than or equal to that.

    Returns true if this is less than or equal to that.

    Implicit
    This member is added by an implicit conversion from BigDecimal toOrdered[BigDecimal] performed by method orderingToOrdered in scala.math.Ordered.
    Shadowing
    This implicitly inherited member is shadowed by one or more members in this class.
    To access this member you can use a type ascription:
    (bigDecimal: Ordered[BigDecimal]).<=(that)
    Definition Classes
    Ordered
  4. def >(that: BigDecimal): Boolean

    Returns true if this is greater than that.

    Returns true if this is greater than that.

    Implicit
    This member is added by an implicit conversion from BigDecimal toOrdered[BigDecimal] performed by method orderingToOrdered in scala.math.Ordered.
    Shadowing
    This implicitly inherited member is shadowed by one or more members in this class.
    To access this member you can use a type ascription:
    (bigDecimal: Ordered[BigDecimal]).>(that)
    Definition Classes
    Ordered
  5. def >=(that: BigDecimal): Boolean

    Returns true if this is greater than or equal to that.

    Returns true if this is greater than or equal to that.

    Implicit
    This member is added by an implicit conversion from BigDecimal toOrdered[BigDecimal] performed by method orderingToOrdered in scala.math.Ordered.
    Shadowing
    This implicitly inherited member is shadowed by one or more members in this class.
    To access this member you can use a type ascription:
    (bigDecimal: Ordered[BigDecimal]).>=(that)
    Definition Classes
    Ordered
  6. def compare(that: BigDecimal): Int

    Result of comparing this with operand that.

    Result of comparing this with operand that.

    Implement this method to determine how instances of A will be sorted.

    Returns x where:

    • x < 0 when this < that
    • x == 0 when this == that
    • x > 0 when this > that
    Implicit
    This member is added by an implicit conversion from BigDecimal toOrdered[BigDecimal] performed by method orderingToOrdered in scala.math.Ordered.
    Shadowing
    This implicitly inherited member is shadowed by one or more members in this class.
    To access this member you can use a type ascription:
    (bigDecimal: Ordered[BigDecimal]).compare(that)
    Definition Classes
    Ordered
  7. def compareTo(that: BigDecimal): Int

    Result of comparing this with operand that.

    Result of comparing this with operand that.

    Implicit
    This member is added by an implicit conversion from BigDecimal toOrdered[BigDecimal] performed by method orderingToOrdered in scala.math.Ordered.
    Shadowing
    This implicitly inherited member is shadowed by one or more members in this class.
    To access this member you can use a type ascription:
    (bigDecimal: Ordered[BigDecimal]).compareTo(that)
    Definition Classes
    Ordered → Comparable

Deprecated Value Members

  1. def formatted(fmtstr: String): String

    Returns string formatted according to given format string.

    Returns string formatted according to given format string. Format strings are as for String.format (@see java.lang.String.format).

    Implicit
    This member is added by an implicit conversion from BigDecimal toStringFormat[BigDecimal] performed by method StringFormat in scala.Predef.
    Definition Classes
    StringFormat
    Annotations
    @deprecated @inline()
    Deprecated

    (Since version 2.12.16) Use formatString.format(value) instead of value.formatted(formatString), or use the f"" string interpolator. In Java 15 and later, formatted resolves to the new method in String which has reversed parameters.

  2. def [B](y: B): (BigDecimal, B)
    Implicit
    This member is added by an implicit conversion from BigDecimal toArrowAssoc[BigDecimal] performed by method ArrowAssoc in scala.Predef.
    Definition Classes
    ArrowAssoc
    Annotations
    @deprecated
    Deprecated

    (Since version 2.13.0) Use -> instead. If you still wish to display it as one character, consider using a font with programming ligatures such as Fira Code.

Inherited from Ordered[BigDecimal]

Inherited from Comparable[BigDecimal]

Inherited from ScalaNumber

Inherited from Number

Inherited from java.io.Serializable

Inherited from AnyRef

Inherited from Any

Inherited by implicit conversion orderingToOrdered fromBigDecimal to Ordered[BigDecimal]

Inherited by implicit conversion any2stringadd fromBigDecimal to any2stringadd[BigDecimal]

Inherited by implicit conversion StringFormat fromBigDecimal to StringFormat[BigDecimal]

Inherited by implicit conversion Ensuring fromBigDecimal to Ensuring[BigDecimal]

Inherited by implicit conversion ArrowAssoc fromBigDecimal to ArrowAssoc[BigDecimal]

Ungrouped