The class of the iterator returned by the iterator method.
The type implementing this traversable
A class supporting filtered operations.
o != arg0 is the same as !(o == (arg0)).
o != arg0 is the same as !(o == (arg0)).
the object to compare against this object for dis-equality.
false if the receiver object is equivalent to the argument; true otherwise.
Return the current string concatenated n times.
Return the current string concatenated n times.
[use case] Concatenates this string with the elements of a traversable collection.
Concatenates this string with the elements of a traversable collection.
the traversable to append.
a new string which contains all elements of this string
followed by all elements of that.
Concatenates this string with the elements of a traversable collection.
Concatenates this string with the elements of a traversable collection.
the element type of the returned collection.
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the traversable to append.
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That which contains all elements of this string
followed by all elements of that.
[use case] Prepends an element to this string
Prepends an element to this string
the prepended element
a new string consisting of elem followed
by all elements of this string.
Prepends an element to this string
Prepends an element to this string
the element type of the returned string.
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the prepended element
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That consisting of elem followed
by all elements of this string.
Applies a binary operator to a start value and all elements of this string, going left to right.
Applies a binary operator to a start value and all elements of this string, going left to right.
Note: /: is alternate syntax for foldLeft; z /: xs is the same as xs foldLeft z.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this string,
going left to right with the start value z on the left:
op(...op(op(z, x1), x2), ..., xn)
where x,,1,,, ..., x,,n,, are the elements of this string.
[use case] Appends an element to this string
Appends an element to this string
the appended element
a new string consisting of
all elements of this string followed by elem.
Appends an element to this string
Appends an element to this string
the element type of the returned string.
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the appended element
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That consisting of
all elements of this string followed by elem.
Applies a binary operator to all elements of this string and a start value, going right to left.
Applies a binary operator to all elements of this string and a start value, going right to left.
Note: :\ is alternate syntax for foldRight; xs :\ z is the same as xs foldRight z.
the result type of the binary operator.
the start value
the binary operator
the result of inserting op between consecutive elements of this string,
going right to left with the start value z on the right:
op(x1, op(x2, ... op(xn, z)...))
where x,,1,,, ..., x,,n,, are the elements of this string.
o == arg0 is the same as if (o eq null) arg0 eq null else o.equals(arg0).
o == arg0 is the same as if (o eq null) arg0 eq null else o.equals(arg0).
the object to compare against this object for equality.
true if the receiver object is equivalent to the argument; false otherwise.
o == arg0 is the same as o.equals(arg0).
o == arg0 is the same as o.equals(arg0).
the object to compare against this object for equality.
true if the receiver object is equivalent to the argument; false otherwise.
Appends all elements of this string to a string builder.
Appends all elements of this string to a string builder.
The written text consists of the string representations (w.r.t. the method toString)
of all elements of this string without any separator string.
the string builder to which elements are appended.
the string builder b to which elements were appended.
Appends all elements of this string to a string builder using a separator string.
Appends all elements of this string to a string builder using a separator string.
The written text consists of the string representations (w.r.t. the method toString)
of all elements of this string, separated by the string sep.
the string builder to which elements are appended.
the separator string.
the string builder b to which elements were appended.
Appends all elements of this string to a string builder using start, end, and separator strings.
Appends all elements of this string to a string builder using start, end, and separator strings.
The written text begins with the string start and ends with the string
end. Inside, the string representations (w.r.t. the method toString)
of all elements of this string are separated by the string sep.
the string builder to which elements are appended.
the starting string.
the separator string.
the ending string.
the string builder b to which elements were appended.
Return element at index n
Return element at index n
This method is used to cast the receiver object to be of type T0.
This method is used to cast the receiver object to be of type T0.
Note that the success of a cast at runtime is modulo Scala's erasure semantics. Therefore the expression1.asInstanceOf[String] will throw a ClassCastException at runtime, while the expressionList(1).asInstanceOf[List[String]] will not. In the latter example, because the type argument is erased as
part of compilation it is not possible to check whether the contents of the list are of the requested typed.
the receiver object.
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind.
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind.
The object with which this string should be compared
true, if this string can possibly equal that, false otherwise. The test
takes into consideration only the run-time types of objects but ignores their elements.
Returns this string with first character converted to upper case
Returns this string with first character converted to upper case
This method creates and returns a copy of the receiver object.
This method creates and returns a copy of the receiver object.
The default implementation of the clone method is platform dependent.
a copy of the receiver object.
[use case] Builds a new collection by applying a partial function to all elements of this string on which the function is defined.
Builds a new collection by applying a partial function to all elements of this string on which the function is defined.
the element type of the returned collection.
the partial function which filters and maps the string.
a new string resulting from applying the given partial function
pf to each element on which it is defined and collecting the results.
The order of the elements is preserved.
Builds a new collection by applying a partial function to all elements of this string on which the function is defined.
Builds a new collection by applying a partial function to all elements of this string on which the function is defined.
the element type of the returned collection.
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the partial function which filters and maps the string.
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That resulting from applying the partial function
pf to each element on which it is defined and collecting the results.
The order of the elements is preserved.
Result of comparing this with operand that.
Result of comparing this with operand that.
returns x where
x < 0 iff this < that x == 0 iff this == that x > 0 iff this > that
Tests whether this string contains a given value as an element.
Tests whether this string contains a given value as an element.
the element to test.
true if this string has an element that is
is equal (wrt ==) to elem, false otherwise.
Tests whether this string contains a given sequence as a slice.
Tests whether this string contains a given sequence as a slice.
the sequence to test
true if this string contains a slice with the same elements
as that, otherwise false.
[use case] Copies elements of this string to an array.
Copies elements of this string to an array.
Fills the given array xs with at most len elements of
this string, starting at position start.
Copying will stop once either the end of the current string is reached,
or the end of the array is reached, or len elements have been copied.
the array to fill.
the starting index.
the maximal number of elements to copy.
Copies elements of this string to an array.
Copies elements of this string to an array.
Fills the given array xs with at most len elements of
this string, starting at position start.
Copying will stop once either the end of the current string is reached,
or the end of the array is reached, or len elements have been copied.
the type of the elements of the array.
the array to fill.
the starting index.
the maximal number of elements to copy.
[use case] Copies values of this string to an array.
Copies values of this string to an array.
Fills the given array xs with values of this string.
Copying will stop once either the end of the current string is reached,
or the end of the array is reached.
the array to fill.
Copies values of this string to an array.
Copies values of this string to an array.
Fills the given array xs with values of this string.
Copying will stop once either the end of the current string is reached,
or the end of the array is reached.
the type of the elements of the array.
the array to fill.
[use case] Copies values of this string to an array.
Copies values of this string to an array.
Fills the given array xs with values of this string, after skipping start values.
Copying will stop once either the end of the current string is reached,
or the end of the array is reached.
the array to fill.
the starting index.
Copies values of this string to an array.
Copies values of this string to an array.
Fills the given array xs with values of this string, after skipping start values.
Copying will stop once either the end of the current string is reached,
or the end of the array is reached.
the type of the elements of the array.
the array to fill.
the starting index.
Copies all elements of this string to a buffer.
Copies all elements of this string to a buffer.
The buffer to which elements are copied.
Tests whether every element of this string relates to the corresponding element of another sequence by satisfying a test predicate.
Tests whether every element of this string relates to the corresponding element of another sequence by satisfying a test predicate.
the type of the elements of that
the other sequence
the test predicate, which relates elements from both sequences
true if both sequences have the same length and
p(x, y) is true for all corresponding elements x of this string
and y of that, otherwise false.
Counts the number of elements in the string which satisfy a predicate.
Counts the number of elements in the string which satisfy a predicate.
the predicate used to test elements.
the number of elements satisfying the predicate p.
[use case] Computes the multiset difference between this string and another sequence.
Computes the multiset difference between this string and another sequence.
the sequence of elements to remove
a new string which contains all elements of this string
except some of occurrences of elements that also appear in that.
If an element value x appears
n times in that, then the first n occurrences of x will not form
part of the result, but any following occurrences will.
Computes the multiset difference between this string and another sequence.
Computes the multiset difference between this string and another sequence.
the element type of the returned string.
the sequence of elements to remove
a new collection of type That which contains all elements of this string
except some of occurrences of elements that also appear in that.
If an element value x appears
n times in that, then the first n occurrences of x will not form
part of the result, but any following occurrences will.
Builds a new string from this string without any duplicate elements.
Builds a new string from this string without any duplicate elements.
A new string which contains the first occurrence of every element of this string.
Selects all elements except first n ones.
Selects all elements except first n ones.
the number of elements to drop from this string.
a string consisting of all elements of this string except the first n ones, or else the
empty string, if this string has less than n elements.
Selects all elements except last n ones.
Selects all elements except last n ones.
The number of elements to take
a string consisting of all elements of this string except the first n ones, or else the
empty string, if this string has less than n elements.
Drops longest prefix of elements that satisfy a predicate.
Drops longest prefix of elements that satisfy a predicate.
The predicate used to test elements.
the longest suffix of this string whose first element
does not satisfy the predicate p.
use iterator' instead
Tests whether this string ends with the given sequence.
Tests whether this string ends with the given sequence.
the sequence to test
true if this string has that as a suffix, false otherwise.
This method is used to test whether the argument (arg0) is a reference to the
receiver object (this).
This method is used to test whether the argument (arg0) is a reference to the
receiver object (this).
The eq method implements an [http://en.wikipedia.org/wiki/Equivalence_relation equivalence relation] on
non-null instances of AnyRef:
* It is reflexive: for any non-null instance x of type AnyRef, x.eq(x) returns true.
* It is symmetric: for any non-null instances x and y of type AnyRef, x.eq(y) returns true if and
only if y.eq(x) returns true.
* It is transitive: for any non-null instances x, y, and z of type AnyRef if x.eq(y) returns true and y.eq(z) returns true, then x.eq(z) returns true.
Additionally, the eq method has three other properties.
* It is consistent: for any non-null instances x and y of type AnyRef, multiple invocations of
x.eq(y) consistently returns true or consistently returns false.
* For any non-null instance x of type AnyRef, x.eq(null) and null.eq(x) returns false.
* null.eq(null) returns true.
When overriding the equals or hashCode methods, it is important to ensure that their behavior is
consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2), they
should be equal to each other (o1 == o2) and they should hash to the same value (o1.hashCode == o2.hashCode).
the object to compare against this object for reference equality.
true if the argument is a reference to the receiver object; false otherwise.
The equality method defined in AnyRef.
Tests whether every element of this string relates to the corresponding element of another sequence by satisfying a test predicate.
Tests whether every element of this string relates to the corresponding element of another sequence by satisfying a test predicate.
the type of the elements of that
the other sequence
true if both sequences have the same length and
p(x, y) is true for all corresponding elements x of this string
and y of that, otherwise false.
use corresponds instead
Tests whether a predicate holds for some of the elements of this string.
Tests whether a predicate holds for some of the elements of this string.
the predicate used to test elements.
true if the given predicate p holds for some of the elements
of this string, otherwise false.
Selects all elements of this string which satisfy a predicate.
Selects all elements of this string which satisfy a predicate.
the predicate used to test elements.
a new string consisting of all elements of this string that satisfy the given
predicate p. The order of the elements is preserved.
Selects all elements of this string which do not satisfy a predicate.
Selects all elements of this string which do not satisfy a predicate.
the predicate used to test elements.
a new string consisting of all elements of this string that do not satisfy the given
predicate p. The order of the elements is preserved.
This method is called by the garbage collector on the receiver object when garbage collection determines that there are no more references to the object.
This method is called by the garbage collector on the receiver object when garbage collection determines that there are no more references to the object.
The details of when and if the finalize method are invoked, as well as the interaction between finalizeand non-local returns and exceptions, are all platform dependent.
Finds the first element of the string satisfying a predicate, if any.
Finds the first element of the string satisfying a predicate, if any.
the predicate used to test elements.
an option value containing the first element in the string
that satisfies p, or None if none exists.
Returns index of the first element satisfying a predicate, or -1.
Returns index of the first element satisfying a predicate, or -1.
Returns index of the last element satisfying a predicate, or -1.
Returns index of the last element satisfying a predicate, or -1.
use lastIndexWhere instead
use head' instead
None if iterable is empty.
[use case] Builds a new collection by applying a function to all elements of this string and concatenating the results.
Builds a new collection by applying a function to all elements of this string and concatenating the results.
the element type of the returned collection.
the function to apply to each element.
a new string resulting from applying the given collection-valued function
f to each element of this string and concatenating the results.
Builds a new collection by applying a function to all elements of this string and concatenating the results.
Builds a new collection by applying a function to all elements of this string and concatenating the results.
the element type of the returned collection.
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the function to apply to each element.
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That resulting from applying the given collection-valued function
f to each element of this string and concatenating the results.
Applies a binary operator to a start value and all elements of this string, going left to right.
Applies a binary operator to a start value and all elements of this string, going left to right.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this string,
going left to right with the start value z on the left:
op(...op(z, x1), x2, ..., xn)
where x,,1,,, ..., x,,n,, are the elements of this string.
Applies a binary operator to all elements of this string and a start value, going right to left.
Applies a binary operator to all elements of this string and a start value, going right to left.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this string,
going right to left with the start value z on the right:
op(x1, op(x2, ... op(xn, z)...))
where x,,1,,, ..., x,,n,, are the elements of this string.
Tests whether a predicate holds for all elements of this string.
Tests whether a predicate holds for all elements of this string.
the predicate used to test elements.
true if the given predicate p holds for all elements
of this string, otherwise false.
[use case] Applies a function f to all elements of this string.
Applies a function f to all elements of this string.
the function that is applied for its side-effect to every element.
The result of function f is discarded.
Applies a function f to all elements of this string.
Applies a function f to all elements of this string.
Note: this method underlies the implementation of most other bulk operations. Subclasses should re-implement this method if a more efficient implementation exists.
the type parameter describing the result of function f.
This result will always be ignored. Typically U is Unit,
but this is not necessary.
the function that is applied for its side-effect to every element.
The result of function f is discarded.
Uses the underlying string as a pattern (in a fashion similar to printf in C), and uses the supplied arguments to fill in the holes.
Uses the underlying string as a pattern (in a fashion similar to printf in C), and uses the supplied arguments to fill in the holes.
The interpretation of the formatting patterns is described in
java.util.Formatter, with the addition that
classes deriving from ScalaNumber (such as scala.BigInt and
scala.BigDecimal) are unwrapped to pass a type which Formatter understands.
the arguments used to instantiating the pattern.
Like format(args*) but takes an initial Locale parameter
which influences formatting as in java.lang.String's format.
Like format(args*) but takes an initial Locale parameter
which influences formatting as in java.lang.String's format.
The interpretation of the formatting patterns is described in
java.util.Formatter, with the addition that
classes deriving from ScalaNumber (such as scala.BigInt and
scala.BigDecimal) are unwrapped to pass a type which Formatter understands.
the arguments used to instantiating the pattern.
Returns a representation that corresponds to the dynamic class of the receiver object.
Returns a representation that corresponds to the dynamic class of the receiver object.
The nature of the representation is platform dependent.
a representation that corresponds to the dynamic class of the receiver object.
Partitions this string into a map of strings according to some discriminator function.
Partitions this string into a map of strings according to some discriminator function.
Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new string.
the type of keys returned by the discriminator function.
the discriminator function.
A map from keys to strings such that the following invariant holds:
(xs partition f)(k) = xs filter (x => f(x) == k)
That is, every key k is bound to a string of those elements x for which f(x) equals k.
Partitions elements in fixed size strings.
Partitions elements in fixed size strings.
the number of elements per group
An iterator producing strings of size size, except the
last will be truncated if the elements don't divide evenly.
Iterator#grouped
Tests whether this string is known to have a finite size.
Tests whether this string is known to have a finite size.
All strict collections are known to have finite size. For a non-strict collection
such as Stream, the predicate returns true if all elements have been computed.
It returns false if the stream is not yet evaluated to the end.
Note: many collection methods will not work on collections of infinite sizes.
true if this collection is known to have finite size, false otherwise.
Hashcodes for StringOps produce a value from the hashcodes of all the elements of the string.
Hashcodes for StringOps produce a value from the hashcodes of all the elements of the string.@return the hash code value for the object. */
Selects the first element of this string.
Selects the first element of this string.
the first element of this string.
Optionally selects the first element.
Optionally selects the first element.
the first element of this string if it is nonempty, None if it is empty.
[use case] Finds index of first occurrence of some value in this string after or at some start index.
Finds index of first occurrence of some value in this string after or at some start index.
the element value to search for.
the start index
the index >= from of the first element of this string that is equal (wrt ==)
to elem, or -1, if none exists.
Finds index of first occurrence of some value in this string after or at some start index.
Finds index of first occurrence of some value in this string after or at some start index.
the type of the element elem.
the element value to search for.
the start index
the index >= from of the first element of this string that is equal (wrt ==)
to elem, or -1, if none exists.
[use case] Finds index of first occurrence of some value in this string.
Finds index of first occurrence of some value in this string.
the element value to search for.
the index of the first element of this string that is equal (wrt ==)
to elem, or -1, if none exists.
Finds index of first occurrence of some value in this string.
Finds index of first occurrence of some value in this string.
the type of the element elem.
the element value to search for.
the index of the first element of this string that is equal (wrt ==)
to elem, or -1, if none exists.
Finds first index after or at a start index where this string contains a given sequence as a slice.
Finds first index after or at a start index where this string contains a given sequence as a slice.
the sequence to test
the start index
the first index >= from such that the elements of this string starting at this index
match the elements of sequence that, or -1 of no such subsequence exists.
Finds first index where this string contains a given sequence as a slice.
Finds first index where this string contains a given sequence as a slice.
the sequence to test
the first index such that the elements of this string starting at this index
match the elements of sequence that, or -1 of no such subsequence exists.
Finds index of the first element satisfying some predicate after or at some start index.
Finds index of the first element satisfying some predicate after or at some start index.
the predicate used to test elements.
the start index
the index >= from of the first element of this string that satisfies the predicate p,
or -1, if none exists.
Finds index of first element satisfying some predicate.
Finds index of first element satisfying some predicate.
the predicate used to test elements.
the index of the first element of this string that satisfies the predicate p,
or -1, if none exists.
Produces the range of all indices of this sequence.
Produces the range of all indices of this sequence.
a Range value from 0 to one less than the length of this string.
Selects all elements except the last.
Selects all elements except the last.
a string consisting of all elements of this string except the last one.
[use case] Computes the multiset intersection between this string and another sequence.
Computes the multiset intersection between this string and another sequence.
the sequence of elements to intersect with.
a new string which contains all elements of this string
which also appear in that.
If an element value x appears
n times in that, then the first n occurrences of x will be retained
in the result, but any following occurrences will be omitted.
Computes the multiset intersection between this string and another sequence.
Computes the multiset intersection between this string and another sequence.
the element type of the returned string.
the sequence of elements to intersect with.
a new collection of type That which contains all elements of this string
which also appear in that.
If an element value x appears
n times in that, then the first n occurrences of x will be retained
in the result, but any following occurrences will be omitted.
Tests whether this string contains given index.
Tests whether this string contains given index.
The implementations of methods apply and isDefinedAt turn a Seq[A] into
a PartialFunction[Int, A].
the index to test
true if this string contains an element at position idx, false otherwise.
Tests whether this string is empty.
Tests whether this string is empty.
true if the string contain no elements, false otherwise.
This method is used to test whether the dynamic type of the receiver object is T0.
This method is used to test whether the dynamic type of the receiver object is T0.
Note that the test result of the test is modulo Scala's erasure semantics. Therefore the expression1.isInstanceOf[String] will return false, while the expression List(1).isInstanceOf[List[String]] will
return true. In the latter example, because the type argument is erased as part of compilation it is not
possible to check whether the contents of the list are of the requested typed.
true if the receiver object is an instance of erasure of type T0; false otherwise.
Tests whether this string can be repeatedly traversed.
Tests whether this string can be repeatedly traversed.
true
Creates a new iterator over all elements contained in this iterable object.
Creates a new iterator over all elements contained in this iterable object.
the new iterator
Selects the last element.
Selects the last element.
the first element of this string.
[use case] Finds index of last occurrence of some value in this string before or at a given end index.
Finds index of last occurrence of some value in this string before or at a given end index.
the element value to search for.
the end index.
the index <= end of the last element of this string that is equal (wrt ==)
to elem, or -1, if none exists.
Finds index of last occurrence of some value in this string before or at a given end index.
Finds index of last occurrence of some value in this string before or at a given end index.
the type of the element elem.
the element value to search for.
the end index.
the index <= end of the last element of this string that is equal (wrt ==)
to elem, or -1, if none exists.
[use case] Finds index of last occurrence of some value in this string.
Finds index of last occurrence of some value in this string.
the element value to search for.
the index of the last element of this string that is equal (wrt ==)
to elem, or -1, if none exists.
Finds index of last occurrence of some value in this string.
Finds index of last occurrence of some value in this string.
the type of the element elem.
the element value to search for.
the index of the last element of this string that is equal (wrt ==)
to elem, or -1, if none exists.
Finds last index before or at a given end index where this string contains a given sequence as a slice.
Finds last index before or at a given end index where this string contains a given sequence as a slice.
the sequence to test
the end index
the last index <= end such that the elements of this string starting at this index
match the elements of sequence that, or -1 of no such subsequence exists.
Finds last index where this string contains a given sequence as a slice.
Finds last index where this string contains a given sequence as a slice.
the sequence to test
the last index such that the elements of this string starting a this index
match the elements of sequence that, or -1 of no such subsequence exists.
Finds index of last element satisfying some predicate before or at given end index.
Finds index of last element satisfying some predicate before or at given end index.
the predicate used to test elements.
the index <= end of the last element of this string that satisfies the predicate p,
or -1, if none exists.
Finds index of last element satisfying some predicate.
Finds index of last element satisfying some predicate.
the predicate used to test elements.
the index of the last element of this string that satisfies the predicate p,
or -1, if none exists.
Optionally selects the last element.
Optionally selects the last element.
the last element of this string$ if it is nonempty, None if it is empty.
The length of the string.
The length of the string.
Note: xs.length and xs.size yield the same result.
the number of elements in this string.
Compares the length of this string to a test value.
Compares the length of this string to a test value.
the test value that gets compared with the length.
A value x where
x < 0 if this.length < len
x == 0 if this.length == len
x > 0 if this.length > len
The method as implemented here does not call length directly; its running time
is O(length min len) instead of O(length). The method should be overwritten
if computing length is cheap.
Return all lines in this string in an iterator, excluding trailing line end characters, i.
Return all lines in this string in an iterator, excluding trailing line
end characters, i.e. apply .stripLineEnd to all lines
returned by linesWithSeparators.
Return all lines in this string in an iterator, excluding trailing line end characters, i.
Return all lines in this string in an iterator, excluding trailing line
end characters, i.e. apply .stripLineEnd to all lines
returned by linesWithSeparators.
Return all lines in this string in an iterator, including trailing line end characters.
Return all lines in this string in an iterator, including trailing line end characters.
The number of strings returned is one greater than the number of line end characters in this string. For an empty string, a single empty line is returned. A line end character is one of
[use case] Builds a new collection by applying a function to all elements of this string.
Builds a new collection by applying a function to all elements of this string.
the element type of the returned collection.
the function to apply to each element.
a new string resulting from applying the given function
f to each element of this string and collecting the results.
Builds a new collection by applying a function to all elements of this string.
Builds a new collection by applying a function to all elements of this string.
the element type of the returned collection.
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the function to apply to each element.
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That resulting from applying the given function
f to each element of this string and collecting the results.
[use case] Finds the largest element.
Finds the largest element.
the largest element of this string.
Finds the largest element.
Finds the largest element.
The type over which the ordering is defined.
An ordering to be used for comparing elements.
the largest element of this string with respect to the ordering cmp.
[use case] Finds the smallest element.
Finds the smallest element.
the smallest element of this string
Finds the smallest element.
Finds the smallest element.
The type over which the ordering is defined.
An ordering to be used for comparing elements.
the smallest element of this string with respect to the ordering cmp.
Displays all elements of this string in a string.
Displays all elements of this string in a string.
a string representation of this string. In the resulting string
the string representations (w.r.t. the method toString)
of all elements of this string follow each other without any separator string.
Displays all elements of this string in a string using a separator string.
Displays all elements of this string in a string using a separator string.
the separator string.
a string representation of this string. In the resulting string
the string representations (w.r.t. the method toString)
of all elements of this string are separated by the string sep.
Displays all elements of this string in a string using start, end, and separator strings.
Displays all elements of this string in a string using start, end, and separator strings.
the starting string.
the separator string.
the ending string.
a string representation of this string. The resulting string
begins with the string start and ends with the string
end. Inside, the string representations (w.r.t. the method toString)
of all elements of this string are separated by the string sep.
o.ne(arg0) is the same as !(o.eq(arg0)).
o.ne(arg0) is the same as !(o.eq(arg0)).
the object to compare against this object for reference dis-equality.
false if the argument is not a reference to the receiver object; true otherwise.
Creates a string builder buffer as builder for this class
Creates a string builder buffer as builder for this class
Tests whether the string is not empty.
Tests whether the string is not empty.
true if the string contains at least one element, false otherwise.
Wakes up a single thread that is waiting on the receiver object's monitor.
Wakes up a single thread that is waiting on the receiver object's monitor.
Wakes up all threads that are waiting on the receiver object's monitor.
Wakes up all threads that are waiting on the receiver object's monitor.
[use case] Appends an element value to this string until a given target length is reached.
Appends an element value to this string until a given target length is reached.
the target length
the padding value
a new string consisting of
all elements of this string followed by the minimal number of occurrences of elem so
that the resulting string has a length of at least len.
Appends an element value to this string until a given target length is reached.
Appends an element value to this string until a given target length is reached.
the element type of the returned string.
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the target length
the padding value
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That consisting of
all elements of this string followed by the minimal number of occurrences of elem so
that the resulting collection has a length of at least len.
Partitions this string in two strings according to a predicate.
Partitions this string in two strings according to a predicate.
the predicate on which to partition.
a pair of strings: the first string consists of all elements that
satisfy the predicate p and the second string consists of all elements
that don't. The relative order of the elements in the resulting strings
is the same as in the original string.
[use case] Produces a new string where a slice of elements in this string is replaced by another sequence.
Produces a new string where a slice of elements in this string is replaced by another sequence.
the index of the first replaced element
the number of elements to drop in the original string
a new string consisting of all elements of this string
except that replaced elements starting from from are replaced
by patch.
Produces a new string where a slice of elements in this string is replaced by another sequence.
Produces a new string where a slice of elements in this string is replaced by another sequence.
the element type of the returned string.
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the index of the first replaced element
the replacement sequence
the number of elements to drop in the original string
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new string consisting of all elements of this string
except that replaced elements starting from from are replaced
by patch.
Returns the length of the longest prefix whose elements all satisfy some predicate.
Returns the length of the longest prefix whose elements all satisfy some predicate.
the predicate used to test elements.
the length of the longest prefix of this string
such that every element of the segment satisfies the predicate p.
[use case] Multiplies up the elements of this collection.
Multiplies up the elements of this collection.
the product of all elements in this string of numbers of type Int.
Instead of Int, any other type T with an implicit Numeric[T] implementation
can be used as element type of the string and as result type of product.
Examples of such types are: Long, Float, Double, BigInt.
Multiplies up the elements of this collection.
Multiplies up the elements of this collection.
the result type of the * operator.
an implicit parameter defining a set of numeric operations
which includes the * operator to be used in forming the product.
the product of all elements of this string with respect to the * operator in num.
returns a projection that can be used to call non-strict filter,map, and flatMap methods that build projections
of the collection.
returns a projection that can be used to call non-strict filter,map, and flatMap methods that build projections
of the collection.
use view' instead
You can follow a string with .r', turning
it into a Regex. E.g.
"""A\w*""".r is the regular expression for identifiers starting with A'.
You can follow a string with .r', turning
it into a Regex. E.g.
"""A\w*""".r is the regular expression for identifiers starting with A'.
Applies a binary operator to all elements of this string, going left to right.
Applies a binary operator to all elements of this string, going left to right.
the result type of the binary operator.
the binary operator.
the result of inserting op between consecutive elements of this string,
going left to right:
op(...(op(x1, x2), ... ) , xn)
where x,,1,,, ..., x,,n,, are the elements of this string.
Optionally applies a binary operator to all elements of this string, going left to right.
Optionally applies a binary operator to all elements of this string, going left to right.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceLeft(op) is this string is nonempty,
None otherwise.
Applies a binary operator to all elements of this string, going right to left.
Applies a binary operator to all elements of this string, going right to left.
the result type of the binary operator.
the binary operator.
the result of inserting op between consecutive elements of this string,
going right to left:
op(x1, op(x2, ..., op(xn-1, xn)...))
where x,,1,,, ..., x,,n,, are the elements of this string.
Optionally applies a binary operator to all elements of this string, going right to left.
Optionally applies a binary operator to all elements of this string, going right to left.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceRight(op) is this string is nonempty,
None otherwise.
The collection of type string underlying this TraversableLike object.
The collection of type string underlying this TraversableLike object.
By default this is implemented as the TraversableLike object itself, but this can be overridden.
Returns new string wih elements in reversed order.
Returns new string wih elements in reversed order.
A new string with all elements of this string in reversed order.
An iterator yielding elements in reversed order.
An iterator yielding elements in reversed order.
Note: xs.reverseIterator is the same as xs.reverse.iterator but might be more efficient.
an iterator yielding the elements of this string in reversed order
[use case] Builds a new collection by applying a function to all elements of this string and collecting the results in reversed order.
Builds a new collection by applying a function to all elements of this string and collecting the results in reversed order.
the element type of the returned collection.
Note: xs.reverseMap(f) is the same as xs.reverse.map(f) but might be more efficient.
the function to apply to each element.
a new string resulting from applying the given function
f to each element of this string and collecting the results in reversed order.
Builds a new collection by applying a function to all elements of this string and collecting the results in reversed order.
Builds a new collection by applying a function to all elements of this string and collecting the results in reversed order.
Note: xs.reverseMap(f) is the same as xs.reverse.map(f) but might be more efficient.
the element type of the returned collection.
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the function to apply to each element.
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That resulting from applying the given function
f to each element of this string and collecting the results in reversed order.
use reverseIterator' instead
[use case] Checks if the other iterable collection contains the same elements in the same order as this string.
Checks if the other iterable collection contains the same elements in the same order as this string.
the collection to compare with.
true, if both collections contain the same elements in the same order, false otherwise.
Checks if the other iterable collection contains the same elements in the same order as this string.
Checks if the other iterable collection contains the same elements in the same order as this string.
the type of the elements of collection that.
the collection to compare with.
true, if both collections contain the same elements in the same order, false otherwise.
Produces a collection containing cummulative results of applying the operator going left to right.
Produces a collection containing cummulative results of applying the operator going left to right.
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
collection with intermediate results
Produces a collection containing cummulative results of applying the operator going right to left.
Produces a collection containing cummulative results of applying the operator going right to left.
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
collection with intermediate results
Computes length of longest segment whose elements all satisfy some predicate.
Computes length of longest segment whose elements all satisfy some predicate.
the predicate used to test elements.
the index where the search starts.
the length of the longest segment of this string starting from index from such that every element of the segment satisfies the predicate p.
The size of this string, equivalent to length.
The size of this string, equivalent to length.
the number of elements in this string.
Selects an interval of elements.
Selects an interval of elements.
Note: c.slice(from, to) is equivalent to (but possibly more efficient than)
c.drop(from).take(to - from)
the index of the first returned element in this string.
the index one past the last returned element in this string.
a string containing the elements starting at index from and extending up to (but not including) index until of this string.
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.)
the number of elements per group
An iterator producing strings of size size, except the
last will be truncated if the elements don't divide evenly.
Iterator#sliding
Sorts this StringOps according to the Ordering which results from transforming an implicitly given Ordering with a transformation function.
Sorts this StringOps according to the Ordering which results from transforming an implicitly given Ordering with a transformation function.
the target type of the transformation f, and the type where
the ordering ord is defined.
the transformation function mapping elements
to some other domain B.
the ordering assumed on domain B.
a string consisting of the elements of this string
sorted according to the ordering where x < y if
ord.lt(f(x), f(y)).
scala.math.Ordering
Sorts this string according to a comparison function.
Sorts this string according to a comparison function.
The sort is stable. That is, elements that are equal wrt lt appear in the
same order in the sorted sequence as in the original.
the comparison function which tests whether its first argument precedes its second argument in the desired ordering.
a string consisting of the elements of this string
sorted according to the comparison function lt.
Sorts this string according to an Ordering.
Sorts this string according to an Ordering.
The sort is stable. That is, elements that are equal wrt lt appear in the
same order in the sorted sequence as in the original.
the ordering to be used to compare elements.
a string consisting of the elements of this string
sorted according to the ordering ord.
scala.math.Ordering
Splits this string into a prefix/suffix pair according to a predicate.
Splits this string into a prefix/suffix pair according to a predicate.
Note: c span p is equivalent to (but possibly more efficient than)
(c takeWhile p, c dropWhile p), provided the evaluation of the predicate p does not cause any side-effects.
the test predicate
a pair consisting of the longest prefix of this string whose
elements all satisfy p, and the rest of this string.
Splits this string into two at a given position.
Splits this string into two at a given position.
Note: c splitAt n is equivalent to (but possibly more efficient than)
(c take n, c drop n).
the position at which to split.
a pair of strings consisting of the first n elements of this string, and the other elements.
Tests whether this string contains the given sequence at a given index.
Tests whether this string contains the given sequence at a given index.
If the both the receiver object, this and
the argument, that are infinite sequences
this method may not terminate.
the sequence to test
the index where the sequence is searched.
true if the sequence that is contained in this string at index offset,
otherwise false.
Tests whether this string starts with the given sequence.
Tests whether this string starts with the given sequence.
the sequence to test
true if this collection has that as a prefix, false otherwise.
Defines the prefix of this object's toString representation.
Defines the prefix of this object's toString representation.
a string representation which starts the result of toString applied to this string.
By default the string prefix is the simple name of the collection class string.
Strip trailing line end character from this string if it has one.
Strip trailing line end character from this string if it has one.
A line end character is one of
If a line feed character LF is preceded by a carriage return CR (0x0D hex), the CR character is also stripped (Windows convention).
For every line in this string:
For every line in this string:
Strip a leading prefix consisting of blanks or control characters
followed by | from the line.
For every line in this string:
For every line in this string:
Strip a leading prefix consisting of blanks or control characters
followed by marginChar from the line.
Returns this string with the given prefix stripped.
Returns this string with the given prefix stripped.
Returns this string with the given suffix stripped.
Returns this string with the given suffix stripped.
[use case] Sums up the elements of this collection.
Sums up the elements of this collection.
the sum of all elements in this string of numbers of type Int.
Instead of Int, any other type T with an implicit Numeric[T] implementation
can be used as element type of the string and as result type of sum.
Examples of such types are: Long, Float, Double, BigInt.
Sums up the elements of this collection.
Sums up the elements of this collection.
the result type of the + operator.
an implicit parameter defining a set of numeric operations
which includes the + operator to be used in forming the sum.
the sum of all elements of this string with respect to the + operator in num.
Selects all elements except the first.
Selects all elements except the first.
a string consisting of all elements of this string except the first one.
Selects first n elements.
Selects first n elements.
Tt number of elements to take from this string.
a string consisting only of the first n elements of this string, or else the
whole string, if it has less than n elements.
Selects last n elements.
Selects last n elements.
the number of elements to take
a string consisting only of the last n elements of this string, or else the
whole string, if it has less than n elements.
Takes longest prefix of elements that satisfy a predicate.
Takes longest prefix of elements that satisfy a predicate.
The predicate used to test elements.
the longest prefix of this string whose elements all satisfy
the predicate p.
The underlying collection seen as an instance of StringOps.
The underlying collection seen as an instance of StringOps.
By default this is implemented as the current collection object itself,
but this can be overridden.
[use case] Converts this string to an array.
Converts this string to an array.
an array containing all elements of this string.
A ClassManifest must be available for the element type of this string.
Converts this string to an array.
Converts this string to an array.
the type of the elements of the array. A ClassManifest for this type must
be available.
an array containing all elements of this string.
Converts this string to a mutable buffer.
Converts this string to a mutable buffer.
a buffer containing all elements of this string.
A conversion from collections of type Repr to StringOps objects.
A conversion from collections of type Repr to StringOps objects.
By default this is implemented as just a cast, but this can be overridden.
Converts this string to an indexed sequence.
Converts this string to an indexed sequence.
an indexed sequence containing all elements of this string.
Converts this string to an iterable collection.
Converts this string to an iterable collection. Note that the choice of target Iterable must be lazy as this TraversableOnce may be lazy and unevaluated.
an Iterable containing all elements of this string.
Returns an Iterator over the elements in this string.
Returns an Iterator over the elements in this string. Will return the same Iterator if this instance is already an Iterator.
an Iterator containing all elements of this string.
Converts this string to a list.
Converts this string to a list.
a list containing all elements of this string.
Converts this string to a map.
Converts this string to a map. This method is unavailable unless the elements are members of Tuple2, each ((K, V)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.
a map containing all elements of this string.
Converts this string to a sequence.
Converts this string to a sequence.
Overridden for efficiency.@return a sequence containing all elements of this string.
Converts this string to a set.
Converts this string to a set.
a set containing all elements of this string.
Converts this string to a stream.
Converts this string to a stream.
a stream containing all elements of this string.
Converts this string to a string.
Converts this string to a string.
a string representation of this collection. By default this
string consists of the stringPrefix of this string,
followed by all elements separated by commas and enclosed in parentheses.
Converts this string to an unspecified Traversable.
Converts this string to an unspecified Traversable. Will return the same collection if this instance is already Traversable.
a Traversable containing all elements of this string.
[use case] Produces a new sequence which contains all elements of this string and also all elements of a given sequence.
Produces a new sequence which contains all elements of this string and also all elements of
a given sequence. xs union ys is equivalent to xs ++ ys.
the sequence to add.
a new string which contains all elements of this string
followed by all elements of that.
Produces a new sequence which contains all elements of this string and also all elements of a given sequence.
Produces a new sequence which contains all elements of this string and also all elements of
a given sequence. xs union ys is equivalent to xs ++ ys.
Another way to express this
is that xs union ys computes the order-presevring multi-set union of xs and ys.
union is hence a counter-part of diff and intersect which also work on multi-sets.
the element type of the returned string.
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the sequence to add.
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new collection of type That which contains all elements of this string
followed by all elements of that.
[use case] A copy of this string with one single replaced element.
A copy of this string with one single replaced element.
the position of the replacement
the replacing element
a copy of this string with the element at position index replaced by elem.
A copy of this string with one single replaced element.
A copy of this string with one single replaced element.
the element type of the returned string.
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.
the position of the replacement
the replacing element
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type B.
a new string which is a copy of this string with the element at position index replaced by elem.
Creates a non-strict view of a slice of this string.
Creates a non-strict view of a slice of this string.
Note: the difference between view and slice is that view produces
a view of the current string, whereas slice produces a new string.
Note: view(from, to) is equivalent to view.slice(from, to)
the index of the first element of the view
the index of the element following the view
a non-strict view of a slice of this string, starting at index from and extending up to (but not including) index until.
Creates a non-strict view of this string.
Creates a non-strict view of this string.
a non-strict view of this string.
Creates a non-strict filter of this string.
Creates a non-strict filter of this string.
Note: the difference between c filter p and c withFilter p is that
the former creates a new collection, whereas the latter only restricts
the domain of subsequent map, flatMap, foreach, and withFilter operations.
the predicate used to test elements.
an object of class WithFilter, which supports
map, flatMap, foreach, and withFilter operations.
All these operations apply to those elements of this string which
satisfy the predicate p.
[use case] Returns a string formed from this string and another iterable collection by combining corresponding elements in pairs.
Returns a string formed from this string and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
a new string containing pairs consisting of
corresponding elements of this string and that. The length
of the returned collection is the minimum of the lengths of this string and that.
Returns a string formed from this string and another iterable collection by combining corresponding elements in pairs.
Returns a string formed from this string and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.
the type of the first half of the returned pairs (this is always a supertype
of the collection's element type A).
the type of the second half of the returned pairs
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type (A1, B) being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, (A1, B), That].
is found.
The iterable providing the second half of each result pair
an implicit value of class CanBuildFrom which determines the
result class That from the current representation type Repr and the new element type (A1, B).
a new collection of type That containing pairs consisting of
corresponding elements of this string and that. The length
of the returned collection is the minimum of the lengths of this string and that.
[use case] Returns a string formed from this string and another iterable collection by combining corresponding elements in pairs.
Returns a string formed from this string and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
the element to be used to fill up the result if this string is shorter than that.
the element to be used to fill up the result if that is shorter than this string.
a new string containing pairs consisting of
corresponding elements of this string and that. The length
of the returned collection is the maximum of the lengths of this string and that.
If this string is shorter than that, thisElem values are used to pad the result.
If that is shorter than this string, thatElem values are used to pad the result.
Returns a string formed from this string and another iterable collection by combining corresponding elements in pairs.
Returns a string formed from this string and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
the iterable providing the second half of each result pair
the element to be used to fill up the result if this string is shorter than that.
the element to be used to fill up the result if that is shorter than this string.
a new collection of type That containing pairs consisting of
corresponding elements of this string and that. The length
of the returned collection is the maximum of the lengths of this string and that.
If this string is shorter than that, thisElem values are used to pad the result.
If that is shorter than this string, thatElem values are used to pad the result.
[use case] Zips this string with its indices.
Zips this string with its indices.
A new string containing pairs consisting of all elements of this
string paired with their index. Indices start at 0.
@example
List("a", "b", "c").zipWithIndex = List(("a", 0), ("b", 1), ("c", 2))
Zips this string with its indices.
Zips this string with its indices.
the type of the first half of the returned pairs (this is always a supertype
of the collection's element type A).
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type (A1, Int) being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, (A1, Int), That].
is found.
A new collection of type That containing pairs consisting of all elements of this
string paired with their index. Indices start at 0.
This class serves as a wrapper providing
Strings with all the operations found in indexed sequences. Where needed, instances ofStringobject are implicitly converted into this class.The difference between this class and
WrappedStringis that calling transformer methods such asfilterandmapwill yield aStringobject, whereas aWrappedStringwill remain aWrappedString.since
2.8