scala.collection

TraversableLike

trait TraversableLike[+A, +Repr] extends HasNewBuilder[A, Repr] with FilterMonadic[A, Repr] with TraversableOnce[A] with GenTraversableLike[A, Repr] with Parallelizable[A, ParIterable[A]]

A template trait for traversable collections of type Traversable[A].

This is a base trait of all kinds of Scala collections. It implements the behavior common to all collections, in terms of a method foreach with signature:

def foreach[U](f: Elem => U): Unit

Collection classes mixing in this trait provide a concrete foreach method which traverses all the elements contained in the collection, applying a given function to each. They also need to provide a method newBuilder which creates a builder for collections of the same kind.

A traversable class might or might not have two properties: strictness and orderedness. Neither is represented as a type.

The instances of a strict collection class have all their elements computed before they can be used as values. By contrast, instances of a non-strict collection class may defer computation of some of their elements until after the instance is available as a value. A typical example of a non-strict collection class is a scala.collection.immutable.Stream. A more general class of examples are TraversableViews.

If a collection is an instance of an ordered collection class, traversing its elements with foreach will always visit elements in the same order, even for different runs of the program. If the class is not ordered, foreach can visit elements in different orders for different runs (but it will keep the same order in the same run).'

A typical example of a collection class which is not ordered is a HashMap of objects. The traversal order for hash maps will depend on the hash codes of its elements, and these hash codes might differ from one run to the next. By contrast, a LinkedHashMap is ordered because it's foreach method visits elements in the order they were inserted into the HashMap.

Self Type
TraversableLike[A, Repr]
Source
TraversableLike.scala
Linear Supertypes
Known Subclasses
::, Appended, Appended, Appended, Appended, ArrayBuffer, ArrayLike, ArrayOps, ArraySeq, ArrayStack, Atom, Attribute, BitSet, BitSet, BitSet, BitSet1, BitSet2, BitSetLike, BitSetN, Buffer, BufferLike, BufferProxy, BufferWrapper, Comment, ConcurrentMap, Cons, Content, DefaultKeySet, DefaultKeySet, DefaultKeySortedSet, DefaultKeySortedSet, DefaultMap, DefaultMap, DefaultMapModel, DefaultValuesIterable, Document, DoubleLinkedList, DoubleLinkedListLike, DroppedWhile, DroppedWhile, DroppedWhile, DroppedWhile, DroppedWhile, Elem, Empty, EmptyView, EmptyView, EmptyView, EmptyView, EntityRef, Exclusive, Filtered, Filtered, Filtered, Filtered, Filtered, FilteredKeys, FilteredKeys, FlatMapped, FlatMapped, FlatMapped, FlatMapped, Forced, Forced, Forced, Forced, Group, HashMap, HashMap, HashMap1, HashSet, HashSet, HashSet1, HashTrieMap, HashTrieSet, History, ImmutableDefaultKeySet, ImmutableMapAdaptor, ImmutableSetAdaptor, Impl, Inclusive, Inclusive, IndexedSeq, IndexedSeq, IndexedSeq, IndexedSeqLike, IndexedSeqLike, IndexedSeqOptimized, IndexedSeqOptimized, IndexedSeqView, Indices, IntMap, Iterable, Iterable, Iterable, IterableForwarder, IterableLike, IterableProxy, IterableProxyLike, IterableView, IterableViewLike, LinearSeq, LinearSeq, LinearSeq, LinearSeqLike, LinearSeqOptimized, LinkedHashMap, LinkedHashSet, LinkedList, LinkedListLike, List, ListBuffer, ListMap, ListMap, ListSet, LongMap, Map, Map, Map, Map, Map1, Map2, Map3, Map4, MapLike, MapLike, MapLike, MapProxy, MapProxy, MapProxy, MapProxyLike, Mapped, Mapped, Mapped, Mapped, MappedValues, MappedValues, MemberScope, MemberScopeApi, MetaData, MultiMap, MutableList, Nil, Node, Node, Node, NodeBuffer, NodeSeq, Null, NumericRange, ObservableBuffer, ObservableMap, ObservableSet, OpenHashMap, PCData, PagedSeq, Patched, Patched, PicklerEnv, PrefixedAttribute, Prepended, Prepended, PriorityQueue, PriorityQueueProxy, ProcInstr, Queue, Queue, QueueProxy, Range, RefBuffer, ResizableArray, Reversed, Reversed, Reversed, RevertibleHistory, Scope, Scope, ScopeApi, Script, SelectionSet, Seq, Seq, Seq, SeqForwarder, SeqLike, SeqLike, SeqProxy, SeqProxyLike, SeqView, SeqViewLike, Set, Set, Set, Set1, Set2, Set3, Set4, SetLike, SetLike, SetProxy, SetProxy, SetProxy, SetProxyLike, Sliced, Sliced, Sliced, Sliced, Sliced, SortedMap, SortedMap, SortedMapLike, SortedSet, SortedSet, SortedSet, SortedSetLike, SpecialNode, Stack, Stack, StackProxy, Stream, StreamView, StreamViewLike, StringBuilder, StringLike, StringOps, SynchronizedBuffer, SynchronizedMap, SynchronizedPriorityQueue, SynchronizedQueue, SynchronizedSet, SynchronizedStack, SystemProperties, TakenWhile, TakenWhile, TakenWhile, TakenWhile, TakenWhile, Text, Transformed, Transformed, Transformed, Transformed, Transformed, Traversable, Traversable, Traversable, TraversableForwarder, TraversableProxy, TraversableProxyLike, TraversableView, TraversableViewLike, TreeMap, TreeSet, TreeSet, TrieMap, UnPicklerEnv, Unparsed, UnprefixedAttribute, UnrolledBuffer, ValueSet, Vector, WeakHashMap, WithDefault, WithDefault, WithDefault, WrappedArray, WrappedString, Zipped, Zipped, Zipped, ZippedAll, ZippedAll, ZippedAll, columns, indices, items, ofBoolean, ofBoolean, ofByte, ofByte, ofChar, ofChar, ofDouble, ofDouble, ofFloat, ofFloat, ofInt, ofInt, ofLong, ofLong, ofRef, ofRef, ofShort, ofShort, ofUnit, ofUnit, pages, rows
Ordering
  1. Alphabetic
  2. By inheritance
Inherited
  1. TraversableLike
  2. GenTraversableLike
  3. Parallelizable
  4. TraversableOnce
  5. GenTraversableOnce
  6. FilterMonadic
  7. HasNewBuilder
  8. Any
Implicitly
  1. by traversable2ops
  2. by MonadOps
  3. by any2stringadd
  4. by any2stringfmt
  5. by any2ArrowAssoc
  6. by any2Ensuring
  7. by alternateImplicit
  1. Hide All
  2. Show all
Learn more about member selection
Visibility
  1. Public
  2. All

Type Members

  1. type Self = Repr

    The type implementing this traversable

    The type implementing this traversable

    Attributes
    protected[this]
  2. class WithFilter extends FilterMonadic[A, Repr]

    A class supporting filtered operations.

Abstract Value Members

  1. abstract def getClass(): Class[_]

    Returns the runtime class representation of the object.

    Returns the runtime class representation of the object.

    returns

    a class object corresponding to the runtime type of the receiver.

    Definition Classes
    Any
  2. abstract def newBuilder: Builder[A, Repr]

    Creates a new builder for this collection type.

    Creates a new builder for this collection type.

    Attributes
    protected[this]
    Definition Classes
    TraversableLikeHasNewBuilder
  3. abstract def seq: TraversableOnce[A]

    Definition Classes
    Parallelizable

Concrete Value Members

  1. final def !=(arg0: Any): Boolean

    Test two objects for inequality.

    Test two objects for inequality.

    returns

    true if !(this == that), false otherwise.

    Definition Classes
    Any
  2. final def ##(): Int

    Equivalent to x.hashCode except for boxed numeric types and null.

    Equivalent to x.hashCode except for boxed numeric types and null. For numerics, it returns a hash value which is consistent with value equality: if two value type instances compare as true, then ## will produce the same hash value for each of them. For null returns a hashcode where null.hashCode throws a NullPointerException.

    returns

    a hash value consistent with ==

    Definition Classes
    Any
  3. def +(other: String): String

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to StringAdd performed by method any2stringadd in scala.Predef.
    Definition Classes
    StringAdd
  4. def ++[B](that: GenTraversableOnce[B]): Traversable[B]

    [use case] Returns a new traversable collection containing the elements from the left hand operand followed by the elements from the right hand operand.

    [use case]

    Returns a new traversable collection containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the traversable collection is the most specific superclass encompassing the element types of the two operands.

    Example:

    scala> val a = LinkedList(1)
    a: scala.collection.mutable.LinkedList[Int] = LinkedList(1)
    
    scala> val b = LinkedList(2)
    b: scala.collection.mutable.LinkedList[Int] = LinkedList(2)
    
    scala> val c = a ++ b
    c: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2)
    
    scala> val d = LinkedList('a')
    d: scala.collection.mutable.LinkedList[Char] = LinkedList(a)
    
    scala> val e = c ++ d
    e: scala.collection.mutable.LinkedList[AnyVal] = LinkedList(1, 2, a)
    B

    the element type of the returned collection.

    that

    the traversable to append.

    returns

    a new traversable collection which contains all elements of this traversable collection followed by all elements of that.

    Definition Classes
    TraversableLikeGenTraversableLike
    Full Signature

    def ++[B >: A, That](that: GenTraversableOnce[B])(implicit bf: CanBuildFrom[Repr, B, That]): That

  5. def ++:[B >: A, That](that: Traversable[B])(implicit bf: CanBuildFrom[Repr, B, That]): That

    As with ++, returns a new collection containing the elements from the left operand followed by the elements from the right operand.

    As with ++, returns a new collection containing the elements from the left operand followed by the elements from the right operand.

    It differs from ++ in that the right operand determines the type of the resulting collection rather than the left one. Mnemonic: the COLon is on the side of the new COLlection type.

    Example:

    scala> val x = List(1)
    x: List[Int] = List(1)
    
    scala> val y = LinkedList(2)
    y: scala.collection.mutable.LinkedList[Int] = LinkedList(2)
    
    scala> val z = x ++: y
    z: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2)

    This overload exists because: for the implementation of ++: we should reuse that of ++ because many collections override it with more efficient versions.

    Since TraversableOnce has no ++ method, we have to implement that directly, but Traversable and down can use the overload.

    B

    the element type of the returned collection.

    That

    the class of the returned collection. Where possible, That is the same class as the current collection class Repr, but this depends on the element type B being admissible for that class, which means that an implicit instance of type CanBuildFrom[Repr, B, That] is found.

    that

    the traversable to append.

    bf

    an implicit value of class CanBuildFrom which determines the result class That from the current representation type Repr and and the new element type B.

    returns

    a new collection of type That which contains all elements of this traversable collection followed by all elements of that.

  6. def ++:[B](that: TraversableOnce[B]): Traversable[B]

    [use case] As with ++, returns a new collection containing the elements from the left operand followed by the elements from the right operand.

    [use case]

    As with ++, returns a new collection containing the elements from the left operand followed by the elements from the right operand.

    It differs from ++ in that the right operand determines the type of the resulting collection rather than the left one. Mnemonic: the COLon is on the side of the new COLlection type.

    Example:

    scala> val x = List(1)
    x: List[Int] = List(1)
    
    scala> val y = LinkedList(2)
    y: scala.collection.mutable.LinkedList[Int] = LinkedList(2)
    
    scala> val z = x ++: y
    z: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2)
    B

    the element type of the returned collection.

    that

    the traversable to append.

    returns

    a new traversable collection which contains all elements of this traversable collection followed by all elements of that.

    Full Signature

    def ++:[B >: A, That](that: TraversableOnce[B])(implicit bf: CanBuildFrom[Repr, B, That]): That

  7. def ->[B](y: B): (TraversableLike[A, Repr], B)

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to ArrowAssoc[TraversableLike[A, Repr]] performed by method any2ArrowAssoc in scala.Predef.
    Definition Classes
    ArrowAssoc
    Annotations
    @inline()
  8. def /:[B](z: B)(op: (B, A) ⇒ B): B

    Applies a binary operator to a start value and all elements of this traversable collection, going left to right.

    Applies a binary operator to a start value and all elements of this traversable collection, going left to right.

    Note: /: is alternate syntax for foldLeft; z /: xs is the same as xs foldLeft z.

    Examples:

    Note that the folding function used to compute b is equivalent to that used to compute c.

    scala> val a = LinkedList(1,2,3,4)
    a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4)
    
    scala> val b = (5 /: a)(_+_)
    b: Int = 15
    
    scala> val c = (5 /: a)((x,y) => x + y)
    c: Int = 15

    Note: will not terminate for infinite-sized collections.

    Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.

    B

    the result type of the binary operator.

    z

    the start value.

    op

    the binary operator.

    returns

    the result of inserting op between consecutive elements of this traversable collection, going left to right with the start value z on the left:

    op(...op(op(z, x_1), x_2), ..., x_n)

    where x1, ..., xn are the elements of this traversable collection.

    Definition Classes
    TraversableOnceGenTraversableOnce
  9. def :\[B](z: B)(op: (A, B) ⇒ B): B

    Applies a binary operator to all elements of this traversable collection and a start value, going right to left.

    Applies a binary operator to all elements of this traversable collection and a start value, going right to left.

    Note: :\ is alternate syntax for foldRight; xs :\ z is the same as xs foldRight z.

    Note: will not terminate for infinite-sized collections.

    Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.

    Examples:

    Note that the folding function used to compute b is equivalent to that used to compute c.

    scala> val a = LinkedList(1,2,3,4)
    a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4)
    
    scala> val b = (a :\ 5)(_+_)
    b: Int = 15
    
    scala> val c = (a :\ 5)((x,y) => x + y)
    c: Int = 15
    B

    the result type of the binary operator.

    z

    the start value

    op

    the binary operator

    returns

    the result of inserting op between consecutive elements of this traversable collection, going right to left with the start value z on the right:

    op(x_1, op(x_2, ... op(x_n, z)...))

    where x1, ..., xn are the elements of this traversable collection.

    Definition Classes
    TraversableOnceGenTraversableOnce
  10. final def ==(arg0: Any): Boolean

    Test two objects for equality.

    Test two objects for equality. The expression x == that is equivalent to if (x eq null) that eq null else x.equals(that).

    returns

    true if the receiver object is equivalent to the argument; false otherwise.

    Definition Classes
    Any
  11. def addString(b: StringBuilder): StringBuilder

    Appends all elements of this traversable collection to a string builder.

    Appends all elements of this traversable collection to a string builder. The written text consists of the string representations (w.r.t. the method toString) of all elements of this traversable collection without any separator string.

    Example:

    scala> val a = LinkedList(1,2,3,4)
    a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4)
    
    scala> val b = new StringBuilder()
    b: StringBuilder =
    
    scala> val h = a.addString(b)
    b: StringBuilder = 1234
    b

    the string builder to which elements are appended.

    returns

    the string builder b to which elements were appended.

    Definition Classes
    TraversableOnce
  12. def addString(b: StringBuilder, sep: String): StringBuilder

    Appends all elements of this traversable collection to a string builder using a separator string.

    Appends all elements of this traversable collection to a string builder using a separator string. The written text consists of the string representations (w.r.t. the method toString) of all elements of this traversable collection, separated by the string sep.

    Example:

    scala> val a = LinkedList(1,2,3,4)
    a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4)
    
    scala> val b = new StringBuilder()
    b: StringBuilder =
    
    scala> a.addString(b, ", ")
    res0: StringBuilder = 1, 2, 3, 4
    b

    the string builder to which elements are appended.

    sep

    the separator string.

    returns

    the string builder b to which elements were appended.

    Definition Classes
    TraversableOnce
  13. def addString(b: StringBuilder, start: String, sep: String, end: String): StringBuilder

    Appends all elements of this traversable collection to a string builder using start, end, and separator strings.

    Appends all elements of this traversable collection to a string builder using start, end, and separator strings. The written text begins with the string start and ends with the string end. Inside, the string representations (w.r.t. the method toString) of all elements of this traversable collection are separated by the string sep.

    Example:

    scala> val a = LinkedList(1,2,3,4)
    a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4)
    
    scala> val b = new StringBuilder()
    b: StringBuilder =
    
    scala> a.addString(b, "LinkedList(", ", ", ")")
    res1: StringBuilder = LinkedList(1, 2, 3, 4)
    b

    the string builder to which elements are appended.

    start

    the starting string.

    sep

    the separator string.

    end

    the ending string.

    returns

    the string builder b to which elements were appended.

    Definition Classes
    TraversableOnce
  14. def aggregate[B](z: B)(seqop: (B, A) ⇒ B, combop: (B, B) ⇒ B): B

    Aggregates the results of applying an operator to subsequent elements.

    Aggregates the results of applying an operator to subsequent elements.

    This is a more general form of fold and reduce. It has similar semantics, but does not require the result to be a supertype of the element type. It traverses the elements in different partitions sequentially, using seqop to update the result, and then applies combop to results from different partitions. The implementation of this operation may operate on an arbitrary number of collection partitions, so combop may be invoked an arbitrary number of times.

    For example, one might want to process some elements and then produce a Set. In this case, seqop would process an element and append it to the list, while combop would concatenate two lists from different partitions together. The initial value z would be an empty set.

    pc.aggregate(Set[Int]())(_ += process(_), _ ++ _)

    Another example is calculating geometric mean from a collection of doubles (one would typically require big doubles for this).

    B

    the type of accumulated results

    z

    the initial value for the accumulated result of the partition - this will typically be the neutral element for the seqop operator (e.g. Nil for list concatenation or 0 for summation)

    seqop

    an operator used to accumulate results within a partition

    combop

    an associative operator used to combine results from different partitions

    Definition Classes
    TraversableOnceGenTraversableOnce
  15. final def asInstanceOf[T0]: T0

    Cast the receiver object to be of type T0.

    Cast the receiver object to be of type T0.

    Note that the success of a cast at runtime is modulo Scala's erasure semantics. Therefore the expression 1.asInstanceOf[String] will throw a ClassCastException at runtime, while the expression List(1).asInstanceOf[List[String]] will not. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the requested type.

    returns

    the receiver object.

    Definition Classes
    Any
    Exceptions thrown
    ClassCastException

    if the receiver object is not an instance of the erasure of type T0.

  16. def asParIterable: ParIterable[A]

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to TraversableOps[A] performed by method traversable2ops in scala.collection.parallel.
    Definition Classes
    TraversableOps
  17. def asParSeq: ParSeq[A]

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to TraversableOps[A] performed by method traversable2ops in scala.collection.parallel.
    Definition Classes
    TraversableOps
  18. def collect[B](pf: PartialFunction[A, B]): Traversable[B]

    [use case] Builds a new collection by applying a partial function to all elements of this traversable collection on which the function is defined.

    [use case]

    Builds a new collection by applying a partial function to all elements of this traversable collection on which the function is defined.

    B

    the element type of the returned collection.

    pf

    the partial function which filters and maps the traversable collection.

    returns

    a new traversable collection resulting from applying the given partial function pf to each element on which it is defined and collecting the results. The order of the elements is preserved.

    Definition Classes
    TraversableLikeGenTraversableLike
    Full Signature

    def collect[B, That](pf: PartialFunction[A, B])(implicit bf: CanBuildFrom[Repr, B, That]): That

  19. def collectFirst[B](pf: PartialFunction[A, B]): Option[B]

    Finds the first element of the traversable collection for which the given partial function is defined, and applies the partial function to it.

    Finds the first element of the traversable collection for which the given partial function is defined, and applies the partial function to it.

    Note: may not terminate for infinite-sized collections.

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    pf

    the partial function

    returns

    an option value containing pf applied to the first value for which it is defined, or None if none exists.

    Definition Classes
    TraversableOnce
    Example:
    1. Seq("a", 1, 5L).collectFirst({ case x: Int => x*10 }) = Some(10)

  20. def copyToArray(xs: Array[A], start: Int, len: Int): Unit

    [use case] Copies elements of this traversable collection to an array.

    [use case]

    Copies elements of this traversable collection to an array. Fills the given array xs with at most len elements of this traversable collection, starting at position start. Copying will stop once either the end of the current traversable collection is reached, or the end of the array is reached, or len elements have been copied.

    Note: will not terminate for infinite-sized collections.

    xs

    the array to fill.

    start

    the starting index.

    len

    the maximal number of elements to copy.

    Definition Classes
    TraversableLikeTraversableOnceGenTraversableOnce
    Full Signature

    def copyToArray[B >: A](xs: Array[B], start: Int, len: Int): Unit

  21. def copyToArray(xs: Array[A]): Unit

    [use case] Copies values of this traversable collection to an array.

    [use case]

    Copies values of this traversable collection to an array. Fills the given array xs with values of this traversable collection. Copying will stop once either the end of the current traversable collection is reached, or the end of the array is reached.

    Note: will not terminate for infinite-sized collections.

    xs

    the array to fill.

    Definition Classes
    TraversableOnceGenTraversableOnce
    Full Signature

    def copyToArray[B >: A](xs: Array[B]): Unit

  22. def copyToArray(xs: Array[A], start: Int): Unit

    [use case] Copies values of this traversable collection to an array.

    [use case]

    Copies values of this traversable collection to an array. Fills the given array xs with values of this traversable collection, beginning at index start. Copying will stop once either the end of the current traversable collection is reached, or the end of the array is reached.

    Note: will not terminate for infinite-sized collections.

    xs

    the array to fill.

    start

    the starting index.

    Definition Classes
    TraversableOnceGenTraversableOnce
    Full Signature

    def copyToArray[B >: A](xs: Array[B], start: Int): Unit

  23. def copyToBuffer[B >: A](dest: Buffer[B]): Unit

    Copies all elements of this traversable collection to a buffer.

    Copies all elements of this traversable collection to a buffer.

    Note: will not terminate for infinite-sized collections.

    dest

    The buffer to which elements are copied.

    Definition Classes
    TraversableOnce
  24. def count(p: (A) ⇒ Boolean): Int

    Counts the number of elements in the traversable collection which satisfy a predicate.

    Counts the number of elements in the traversable collection which satisfy a predicate.

    p

    the predicate used to test elements.

    returns

    the number of elements satisfying the predicate p.

    Definition Classes
    TraversableOnceGenTraversableOnce
  25. def drop(n: Int): Repr

    Selects all elements except first n ones.

    Selects all elements except first n ones.

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    n

    the number of elements to drop from this traversable collection.

    returns

    a traversable collection consisting of all elements of this traversable collection except the first n ones, or else the empty traversable collection, if this traversable collection has less than n elements.

    Definition Classes
    TraversableLikeGenTraversableLike
  26. def dropWhile(p: (A) ⇒ Boolean): Repr

    Drops longest prefix of elements that satisfy a predicate.

    Drops longest prefix of elements that satisfy a predicate.

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    returns

    the longest suffix of this traversable collection whose first element does not satisfy the predicate p.

    Definition Classes
    TraversableLikeGenTraversableLike
  27. def ensuring(cond: (TraversableLike[A, Repr]) ⇒ Boolean, msg: ⇒ Any): TraversableLike[A, Repr]

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to Ensuring[TraversableLike[A, Repr]] performed by method any2Ensuring in scala.Predef.
    Definition Classes
    Ensuring
  28. def ensuring(cond: (TraversableLike[A, Repr]) ⇒ Boolean): TraversableLike[A, Repr]

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to Ensuring[TraversableLike[A, Repr]] performed by method any2Ensuring in scala.Predef.
    Definition Classes
    Ensuring
  29. def ensuring(cond: Boolean, msg: ⇒ Any): TraversableLike[A, Repr]

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to Ensuring[TraversableLike[A, Repr]] performed by method any2Ensuring in scala.Predef.
    Definition Classes
    Ensuring
  30. def ensuring(cond: Boolean): TraversableLike[A, Repr]

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to Ensuring[TraversableLike[A, Repr]] performed by method any2Ensuring in scala.Predef.
    Definition Classes
    Ensuring
  31. def equals(arg0: Any): Boolean

    Compares the receiver object (this) with the argument object (that) for equivalence.

    Compares the receiver object (this) with the argument object (that) for equivalence.

    Any implementation of this method should be an equivalence relation:

    • It is reflexive: for any instance x of type Any, x.equals(x) should return true.
    • It is symmetric: for any instances x and y of type Any, x.equals(y) should return true if and only if y.equals(x) returns true.
    • It is transitive: for any instances x, y, and z of type AnyRef if x.equals(y) returns true and y.equals(z) returns true, then x.equals(z) should return true.

    If you override this method, you should verify that your implementation remains an equivalence relation. Additionally, when overriding this method it is usually necessary to override hashCode to ensure that objects which are "equal" (o1.equals(o2) returns true) hash to the same scala.Int. (o1.hashCode.equals(o2.hashCode)).

    returns

    true if the receiver object is equivalent to the argument; false otherwise.

    Definition Classes
    Any
  32. def exists(p: (A) ⇒ Boolean): Boolean

    Tests whether a predicate holds for some of the elements of this traversable collection.

    Tests whether a predicate holds for some of the elements of this traversable collection.

    Note: may not terminate for infinite-sized collections.

    p

    the predicate used to test elements.

    returns

    true if the given predicate p holds for some of the elements of this traversable collection, otherwise false.

    Definition Classes
    TraversableLikeTraversableOnceGenTraversableOnce
  33. def filter(p: (A) ⇒ Boolean): Repr

    Selects all elements of this traversable collection which satisfy a predicate.

    Selects all elements of this traversable collection which satisfy a predicate.

    p

    the predicate used to test elements.

    returns

    a new traversable collection consisting of all elements of this traversable collection that satisfy the given predicate p. The order of the elements is preserved.

    Definition Classes
    TraversableLikeGenTraversableLike
  34. def filterNot(p: (A) ⇒ Boolean): Repr

    Selects all elements of this traversable collection which do not satisfy a predicate.

    Selects all elements of this traversable collection which do not satisfy a predicate.

    p

    the predicate used to test elements.

    returns

    a new traversable collection consisting of all elements of this traversable collection that do not satisfy the given predicate p. The order of the elements is preserved.

    Definition Classes
    TraversableLikeGenTraversableLike
  35. def find(p: (A) ⇒ Boolean): Option[A]

    Finds the first element of the traversable collection satisfying a predicate, if any.

    Finds the first element of the traversable collection satisfying a predicate, if any.

    Note: may not terminate for infinite-sized collections.

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    p

    the predicate used to test elements.

    returns

    an option value containing the first element in the traversable collection that satisfies p, or None if none exists.

    Definition Classes
    TraversableLikeTraversableOnceGenTraversableOnce
  36. def flatMap[B](f: (A) ⇒ GenTraversableOnce[B]): Traversable[B]

    [use case] Builds a new collection by applying a function to all elements of this traversable collection and using the elements of the resulting collections.

    [use case]

    Builds a new collection by applying a function to all elements of this traversable collection and using the elements of the resulting collections.

    For example:

    def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")

    The type of the resulting collection is guided by the static type of traversable collection. This might cause unexpected results sometimes. For example:

    // lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set
    def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet)
    
    // lettersOf will return a Set[Char], not a Seq
    def lettersOf(words: Seq[String]) = words.toSet flatMap (word => word.toSeq)
    
    // xs will be a an Iterable[Int]
    val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2)
    
    // ys will be a Map[Int, Int]
    val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)
    B

    the element type of the returned collection.

    f

    the function to apply to each element.

    returns

    a new traversable collection resulting from applying the given collection-valued function f to each element of this traversable collection and concatenating the results.

    Definition Classes
    TraversableLikeGenTraversableLikeFilterMonadic
    Full Signature

    def flatMap[B, That](f: (A) ⇒ GenTraversableOnce[B])(implicit bf: CanBuildFrom[Repr, B, That]): That

  37. def fold[A1 >: A](z: A1)(op: (A1, A1) ⇒ A1): A1

    Folds the elements of this traversable collection using the specified associative binary operator.

    Folds the elements of this traversable collection using the specified associative binary operator.

    The order in which operations are performed on elements is unspecified and may be nondeterministic.

    A1

    a type parameter for the binary operator, a supertype of A.

    z

    a neutral element for the fold operation; may be added to the result an arbitrary number of times, and must not change the result (e.g., Nil for list concatenation, 0 for addition, or 1 for multiplication.)

    op

    a binary operator that must be associative

    returns

    the result of applying fold operator op between all the elements and z

    Definition Classes
    TraversableOnceGenTraversableOnce
  38. def foldLeft[B](z: B)(op: (B, A) ⇒ B): B

    Applies a binary operator to a start value and all elements of this traversable collection, going left to right.

    Applies a binary operator to a start value and all elements of this traversable collection, going left to right.

    Note: will not terminate for infinite-sized collections.

    Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.

    B

    the result type of the binary operator.

    z

    the start value.

    op

    the binary operator.

    returns

    the result of inserting op between consecutive elements of this traversable collection, going left to right with the start value z on the left:

    op(...op(z, x_1), x_2, ..., x_n)

    where x1, ..., xn are the elements of this traversable collection.

    Definition Classes
    TraversableOnceGenTraversableOnce
  39. def foldRight[B](z: B)(op: (A, B) ⇒ B): B

    Applies a binary operator to all elements of this traversable collection and a start value, going right to left.

    Applies a binary operator to all elements of this traversable collection and a start value, going right to left.

    Note: will not terminate for infinite-sized collections.

    Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.

    B

    the result type of the binary operator.

    z

    the start value.

    op

    the binary operator.

    returns

    the result of inserting op between consecutive elements of this traversable collection, going right to left with the start value z on the right:

    op(x_1, op(x_2, ... op(x_n, z)...))

    where x1, ..., xn are the elements of this traversable collection.

    Definition Classes
    TraversableOnceGenTraversableOnce
  40. def forall(p: (A) ⇒ Boolean): Boolean

    Tests whether a predicate holds for all elements of this traversable collection.

    Tests whether a predicate holds for all elements of this traversable collection.

    Note: may not terminate for infinite-sized collections.

    p

    the predicate used to test elements.

    returns

    true if the given predicate p holds for all elements of this traversable collection, otherwise false.

    Definition Classes
    TraversableLikeTraversableOnceGenTraversableOnce
  41. abstract def foreach(f: (A) ⇒ Unit): Unit

    [use case] Applies a function f to all elements of this traversable collection.

    [use case]

    Applies a function f to all elements of this traversable collection.

    Note: this method underlies the implementation of most other bulk operations. It's important to implement this method in an efficient way.

    f

    the function that is applied for its side-effect to every element. The result of function f is discarded.

    Definition Classes
    TraversableLikeGenTraversableLikeTraversableOnceGenTraversableOnceFilterMonadic
    Full Signature

    abstract def foreach[U](f: (A) ⇒ U): Unit

  42. def formatted(fmtstr: String): String

    Returns string formatted according to given format string.

    Returns string formatted according to given format string. Format strings are as for String.format (@see java.lang.String.format).

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to StringFormat performed by method any2stringfmt in scala.Predef.
    Definition Classes
    StringFormat
    Annotations
    @inline()
  43. def groupBy[K](f: (A) ⇒ K): immutable.Map[K, Repr]

    Partitions this traversable collection into a map of traversable collections according to some discriminator function.

    Partitions this traversable collection into a map of traversable collections according to some discriminator function.

    Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new traversable collection.

    K

    the type of keys returned by the discriminator function.

    f

    the discriminator function.

    returns

    A map from keys to traversable collections such that the following invariant holds:

    (xs partition f)(k) = xs filter (x => f(x) == k)

    That is, every key k is bound to a traversable collection of those elements x for which f(x) equals k.

    Definition Classes
    TraversableLikeGenTraversableLike
  44. def hasDefiniteSize: Boolean

    Tests whether this traversable collection is known to have a finite size.

    Tests whether this traversable collection is known to have a finite size. All strict collections are known to have finite size. For a non-strict collection such as Stream, the predicate returns true if all elements have been computed. It returns false if the stream is not yet evaluated to the end.

    Note: many collection methods will not work on collections of infinite sizes.

    returns

    true if this collection is known to have finite size, false otherwise.

    Definition Classes
    TraversableLikeTraversableOnceGenTraversableOnce
  45. def hashCode(): Int

    Calculate a hash code value for the object.

    Calculate a hash code value for the object.

    The default hashing algorithm is platform dependent.

    Note that it is allowed for two objects to have identical hash codes (o1.hashCode.equals(o2.hashCode)) yet not be equal (o1.equals(o2) returns false). A degenerate implementation could always return 0. However, it is required that if two objects are equal (o1.equals(o2) returns true) that they have identical hash codes (o1.hashCode.equals(o2.hashCode)). Therefore, when overriding this method, be sure to verify that the behavior is consistent with the equals method.

    returns

    the hash code value for this object.

    Definition Classes
    Any
  46. def head: A

    Selects the first element of this traversable collection.

    Selects the first element of this traversable collection.

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    returns

    the first element of this traversable collection.

    Definition Classes
    TraversableLikeGenTraversableLike
    Exceptions thrown
    `NoSuchElementException`

    if the traversable collection is empty.

  47. def headOption: Option[A]

    Optionally selects the first element.

    Optionally selects the first element.

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    returns

    the first element of this traversable collection if it is nonempty, None if it is empty.

    Definition Classes
    TraversableLikeGenTraversableLike
  48. def ifParSeq[R](isbody: (ParSeq[A]) ⇒ R): (TraversableOps[A])#Otherwise[R]

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to TraversableOps[A] performed by method traversable2ops in scala.collection.parallel.
    Definition Classes
    TraversableOps
  49. def init: Repr

    Selects all elements except the last.

    Selects all elements except the last.

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    returns

    a traversable collection consisting of all elements of this traversable collection except the last one.

    Definition Classes
    TraversableLikeGenTraversableLike
    Exceptions thrown
    `UnsupportedOperationException`

    if the traversable collection is empty.

  50. def inits: Iterator[Repr]

    Iterates over the inits of this traversable collection.

    Iterates over the inits of this traversable collection. The first value will be this traversable collection and the final one will be an empty traversable collection, with the intervening values the results of successive applications of init.

    returns

    an iterator over all the inits of this traversable collection

    Example:
    1. List(1,2,3).inits = Iterator(List(1,2,3), List(1,2), List(1), Nil)

  51. def isEmpty: Boolean

    Tests whether this traversable collection is empty.

    Tests whether this traversable collection is empty.

    returns

    true if the traversable collection contain no elements, false otherwise.

    Definition Classes
    TraversableLikeTraversableOnceGenTraversableOnce
  52. final def isInstanceOf[T0]: Boolean

    Test whether the dynamic type of the receiver object is T0.

    Test whether the dynamic type of the receiver object is T0.

    Note that the result of the test is modulo Scala's erasure semantics. Therefore the expression 1.isInstanceOf[String] will return false, while the expression List(1).isInstanceOf[List[String]] will return true. In the latter example, because the type argument is erased as part of compilation it is not possible to check whether the contents of the list are of the specified type.

    returns

    true if the receiver object is an instance of erasure of type T0; false otherwise.

    Definition Classes
    Any
  53. def isParIterable: Boolean

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to TraversableOps[A] performed by method traversable2ops in scala.collection.parallel.
    Definition Classes
    TraversableOps
  54. def isParSeq: Boolean

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to TraversableOps[A] performed by method traversable2ops in scala.collection.parallel.
    Definition Classes
    TraversableOps
  55. def isParallel: Boolean

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to TraversableOps[A] performed by method traversable2ops in scala.collection.parallel.
    Definition Classes
    TraversableOps
  56. final def isTraversableAgain: Boolean

    Tests whether this traversable collection can be repeatedly traversed.

    Tests whether this traversable collection can be repeatedly traversed.

    returns

    true

    Definition Classes
    TraversableLikeGenTraversableLikeGenTraversableOnce
  57. def last: A

    Selects the last element.

    Selects the last element.

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    returns

    The last element of this traversable collection.

    Definition Classes
    TraversableLikeGenTraversableLike
    Exceptions thrown
    NoSuchElementException

    If the traversable collection is empty.

  58. def lastOption: Option[A]

    Optionally selects the last element.

    Optionally selects the last element.

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    returns

    the last element of this traversable collection$ if it is nonempty, None if it is empty.

    Definition Classes
    TraversableLikeGenTraversableLike
  59. def map[B](f: (A) ⇒ B): Traversable[B]

    [use case] Builds a new collection by applying a function to all elements of this traversable collection.

    [use case]

    Builds a new collection by applying a function to all elements of this traversable collection.

    B

    the element type of the returned collection.

    f

    the function to apply to each element.

    returns

    a new traversable collection resulting from applying the given function f to each element of this traversable collection and collecting the results.

    Definition Classes
    TraversableLikeGenTraversableLikeFilterMonadic
    Full Signature

    def map[B, That](f: (A) ⇒ B)(implicit bf: CanBuildFrom[Repr, B, That]): That

  60. def max: A

    [use case] Finds the largest element.

    [use case]

    Finds the largest element.

    returns

    the largest element of this traversable collection.

    Definition Classes
    TraversableOnceGenTraversableOnce
    Full Signature

    def max[B >: A](implicit cmp: Ordering[B]): A

  61. def maxBy[B](f: (A) ⇒ B)(implicit cmp: Ordering[B]): A

    Definition Classes
    TraversableOnceGenTraversableOnce
  62. def min: A

    [use case] Finds the smallest element.

    [use case]

    Finds the smallest element.

    returns

    the smallest element of this traversable collection

    Definition Classes
    TraversableOnceGenTraversableOnce
    Full Signature

    def min[B >: A](implicit cmp: Ordering[B]): A

  63. def minBy[B](f: (A) ⇒ B)(implicit cmp: Ordering[B]): A

    Definition Classes
    TraversableOnceGenTraversableOnce
  64. def mkString: String

    Displays all elements of this traversable collection in a string.

    Displays all elements of this traversable collection in a string.

    returns

    a string representation of this traversable collection. In the resulting string the string representations (w.r.t. the method toString) of all elements of this traversable collection follow each other without any separator string.

    Definition Classes
    TraversableOnceGenTraversableOnce
  65. def mkString(sep: String): String

    Displays all elements of this traversable collection in a string using a separator string.

    Displays all elements of this traversable collection in a string using a separator string.

    sep

    the separator string.

    returns

    a string representation of this traversable collection. In the resulting string the string representations (w.r.t. the method toString) of all elements of this traversable collection are separated by the string sep.

    Definition Classes
    TraversableOnceGenTraversableOnce
    Example:
    1. List(1, 2, 3).mkString("|") = "1|2|3"

  66. def mkString(start: String, sep: String, end: String): String

    Displays all elements of this traversable collection in a string using start, end, and separator strings.

    Displays all elements of this traversable collection in a string using start, end, and separator strings.

    start

    the starting string.

    sep

    the separator string.

    end

    the ending string.

    returns

    a string representation of this traversable collection. The resulting string begins with the string start and ends with the string end. Inside, the string representations (w.r.t. the method toString) of all elements of this traversable collection are separated by the string sep.

    Definition Classes
    TraversableOnceGenTraversableOnce
    Example:
    1. List(1, 2, 3).mkString("(", "; ", ")") = "(1; 2; 3)"

  67. def nonEmpty: Boolean

    Tests whether the traversable collection is not empty.

    Tests whether the traversable collection is not empty.

    returns

    true if the traversable collection contains at least one element, false otherwise.

    Definition Classes
    TraversableOnceGenTraversableOnce
  68. def par: ParIterable[A]

    Returns a parallel implementation of this collection.

    Returns a parallel implementation of this collection.

    For most collection types, this method creates a new parallel collection by copying all the elements. For these collection, par takes linear time. Mutable collections in this category do not produce a mutable parallel collection that has the same underlying dataset, so changes in one collection will not be reflected in the other one.

    Specific collections (e.g. ParArray or mutable.ParHashMap) override this default behaviour by creating a parallel collection which shares the same underlying dataset. For these collections, par takes constant or sublinear time.

    All parallel collections return a reference to themselves.

    returns

    a parallel implementation of this collection

    Definition Classes
    Parallelizable
  69. def parCombiner: Combiner[A, ParIterable[A]]

    The default par implementation uses the combiner provided by this method to create a new parallel collection.

    The default par implementation uses the combiner provided by this method to create a new parallel collection.

    returns

    a combiner for the parallel collection of type ParRepr

    Attributes
    protected[this]
    Definition Classes
    TraversableLikeParallelizable
  70. def partition(p: (A) ⇒ Boolean): (Repr, Repr)

    Partitions this traversable collection in two traversable collections according to a predicate.

    Partitions this traversable collection in two traversable collections according to a predicate.

    p

    the predicate on which to partition.

    returns

    a pair of traversable collections: the first traversable collection consists of all elements that satisfy the predicate p and the second traversable collection consists of all elements that don't. The relative order of the elements in the resulting traversable collections is the same as in the original traversable collection.

    Definition Classes
    TraversableLikeGenTraversableLike
  71. def product: A

    [use case] Multiplies up the elements of this collection.

    [use case]

    Multiplies up the elements of this collection.

    returns

    the product of all elements in this traversable collection of numbers of type Int. Instead of Int, any other type T with an implicit Numeric[T] implementation can be used as element type of the traversable collection and as result type of product. Examples of such types are: Long, Float, Double, BigInt.

    Definition Classes
    TraversableOnceGenTraversableOnce
    Full Signature

    def product[B >: A](implicit num: Numeric[B]): B

  72. def reduce[A1 >: A](op: (A1, A1) ⇒ A1): A1

    Reduces the elements of this traversable collection using the specified associative binary operator.

    Reduces the elements of this traversable collection using the specified associative binary operator.

    The order in which operations are performed on elements is unspecified and may be nondeterministic.

    A1

    A type parameter for the binary operator, a supertype of A.

    op

    A binary operator that must be associative.

    returns

    The result of applying reduce operator op between all the elements if the traversable collection is nonempty.

    Definition Classes
    TraversableOnceGenTraversableOnce
    Exceptions thrown
    UnsupportedOperationException

    if this traversable collection is empty.

  73. def reduceLeft[B >: A](op: (B, A) ⇒ B): B

    Applies a binary operator to all elements of this traversable collection, going left to right.

    Applies a binary operator to all elements of this traversable collection, going left to right.

    Note: will not terminate for infinite-sized collections.

    Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.

    B

    the result type of the binary operator.

    op

    the binary operator.

    returns

    the result of inserting op between consecutive elements of this traversable collection, going left to right:

    op( op( ... op(x_1, x_2) ..., x_{n-1}), x_n)

    where x1, ..., xn are the elements of this traversable collection.

    Definition Classes
    TraversableOnce
    Exceptions thrown
    `UnsupportedOperationException`

    if this traversable collection is empty.

  74. def reduceLeftOption[B >: A](op: (B, A) ⇒ B): Option[B]

    Optionally applies a binary operator to all elements of this traversable collection, going left to right.

    Optionally applies a binary operator to all elements of this traversable collection, going left to right.

    Note: will not terminate for infinite-sized collections.

    Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.

    B

    the result type of the binary operator.

    op

    the binary operator.

    returns

    an option value containing the result of reduceLeft(op) is this traversable collection is nonempty, None otherwise.

    Definition Classes
    TraversableOnceGenTraversableOnce
  75. def reduceOption[A1 >: A](op: (A1, A1) ⇒ A1): Option[A1]

    Reduces the elements of this traversable collection, if any, using the specified associative binary operator.

    Reduces the elements of this traversable collection, if any, using the specified associative binary operator.

    The order in which operations are performed on elements is unspecified and may be nondeterministic.

    A1

    A type parameter for the binary operator, a supertype of A.

    op

    A binary operator that must be associative.

    returns

    An option value containing result of applying reduce operator op between all the elements if the collection is nonempty, and None otherwise.

    Definition Classes
    TraversableOnceGenTraversableOnce
  76. def reduceRight[B >: A](op: (A, B) ⇒ B): B

    Applies a binary operator to all elements of this traversable collection, going right to left.

    Applies a binary operator to all elements of this traversable collection, going right to left.

    Note: will not terminate for infinite-sized collections.

    Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.

    B

    the result type of the binary operator.

    op

    the binary operator.

    returns

    the result of inserting op between consecutive elements of this traversable collection, going right to left:

    op(x_1, op(x_2, ..., op(x_{n-1}, x_n)...))

    where x1, ..., xn are the elements of this traversable collection.

    Definition Classes
    TraversableOnceGenTraversableOnce
    Exceptions thrown
    `UnsupportedOperationException`

    if this traversable collection is empty.

  77. def reduceRightOption[B >: A](op: (A, B) ⇒ B): Option[B]

    Optionally applies a binary operator to all elements of this traversable collection, going right to left.

    Optionally applies a binary operator to all elements of this traversable collection, going right to left.

    Note: will not terminate for infinite-sized collections.

    Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.

    B

    the result type of the binary operator.

    op

    the binary operator.

    returns

    an option value containing the result of reduceRight(op) is this traversable collection is nonempty, None otherwise.

    Definition Classes
    TraversableOnceGenTraversableOnce
  78. def repr: Repr

    The collection of type traversable collection underlying this TraversableLike object.

    The collection of type traversable collection underlying this TraversableLike object. By default this is implemented as the TraversableLike object itself, but this can be overridden.

    Definition Classes
    TraversableLikeGenTraversableLike
  79. def reversed: List[A]

    Attributes
    protected[this]
    Definition Classes
    TraversableOnce
  80. def scan[B >: A, That](z: B)(op: (B, B) ⇒ B)(implicit cbf: CanBuildFrom[Repr, B, That]): That

    Computes a prefix scan of the elements of the collection.

    Computes a prefix scan of the elements of the collection.

    Note: The neutral element z may be applied more than once.

    B

    element type of the resulting collection

    That

    type of the resulting collection

    z

    neutral element for the operator op

    op

    the associative operator for the scan

    cbf

    combiner factory which provides a combiner

    returns

    a new traversable collection containing the prefix scan of the elements in this traversable collection

    Definition Classes
    TraversableLikeGenTraversableLike
  81. def scanLeft[B, That](z: B)(op: (B, A) ⇒ B)(implicit bf: CanBuildFrom[Repr, B, That]): That

    Produces a collection containing cumulative results of applying the operator going left to right.

    Produces a collection containing cumulative results of applying the operator going left to right.

    Note: will not terminate for infinite-sized collections.

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    B

    the type of the elements in the resulting collection

    That

    the actual type of the resulting collection

    z

    the initial value

    op

    the binary operator applied to the intermediate result and the element

    bf

    an implicit value of class CanBuildFrom which determines the result class That from the current representation type Repr and and the new element type B.

    returns

    collection with intermediate results

    Definition Classes
    TraversableLikeGenTraversableLike
  82. def scanRight[B, That](z: B)(op: (A, B) ⇒ B)(implicit bf: CanBuildFrom[Repr, B, That]): That

    Produces a collection containing cumulative results of applying the operator going right to left.

    Produces a collection containing cumulative results of applying the operator going right to left. The head of the collection is the last cumulative result.

    Note: will not terminate for infinite-sized collections.

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    Example:

    List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)
    B

    the type of the elements in the resulting collection

    That

    the actual type of the resulting collection

    z

    the initial value

    op

    the binary operator applied to the intermediate result and the element

    bf

    an implicit value of class CanBuildFrom which determines the result class That from the current representation type Repr and and the new element type B.

    returns

    collection with intermediate results

    Definition Classes
    TraversableLikeGenTraversableLike
    Annotations
    @migration
    Migration

    (Changed in version 2.9.0) The behavior of scanRight has changed. The previous behavior can be reproduced with scanRight.reverse.

  83. def size: Int

    The size of this traversable collection.

    The size of this traversable collection.

    Note: will not terminate for infinite-sized collections.

    returns

    the number of elements in this traversable collection.

    Definition Classes
    TraversableOnceGenTraversableOnce
  84. def slice(from: Int, until: Int): Repr

    Selects an interval of elements.

    Selects an interval of elements. The returned collection is made up of all elements x which satisfy the invariant:

    from <= indexOf(x) < until

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    returns

    a traversable collection containing the elements greater than or equal to index from extending up to (but not including) index until of this traversable collection.

    Definition Classes
    TraversableLikeGenTraversableLike
  85. def span(p: (A) ⇒ Boolean): (Repr, Repr)

    Splits this traversable collection into a prefix/suffix pair according to a predicate.

    Splits this traversable collection into a prefix/suffix pair according to a predicate.

    Note: c span p is equivalent to (but possibly more efficient than) (c takeWhile p, c dropWhile p), provided the evaluation of the predicate p does not cause any side-effects.

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    returns

    a pair consisting of the longest prefix of this traversable collection whose elements all satisfy p, and the rest of this traversable collection.

    Definition Classes
    TraversableLikeGenTraversableLike
  86. def splitAt(n: Int): (Repr, Repr)

    Splits this traversable collection into two at a given position.

    Splits this traversable collection into two at a given position. Note: c splitAt n is equivalent to (but possibly more efficient than) (c take n, c drop n).

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    n

    the position at which to split.

    returns

    a pair of traversable collections consisting of the first n elements of this traversable collection, and the other elements.

    Definition Classes
    TraversableLikeGenTraversableLike
  87. def stringPrefix: String

    Defines the prefix of this object's toString representation.

    Defines the prefix of this object's toString representation.

    returns

    a string representation which starts the result of toString applied to this traversable collection. By default the string prefix is the simple name of the collection class traversable collection.

    Definition Classes
    TraversableLikeGenTraversableLike
  88. def sum: A

    [use case] Sums up the elements of this collection.

    [use case]

    Sums up the elements of this collection.

    returns

    the sum of all elements in this traversable collection of numbers of type Int. Instead of Int, any other type T with an implicit Numeric[T] implementation can be used as element type of the traversable collection and as result type of sum. Examples of such types are: Long, Float, Double, BigInt.

    Definition Classes
    TraversableOnceGenTraversableOnce
    Full Signature

    def sum[B >: A](implicit num: Numeric[B]): B

  89. def tail: Repr

    Selects all elements except the first.

    Selects all elements except the first.

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    returns

    a traversable collection consisting of all elements of this traversable collection except the first one.

    Definition Classes
    TraversableLikeGenTraversableLike
    Exceptions thrown
    `UnsupportedOperationException`

    if the traversable collection is empty.

  90. def tails: Iterator[Repr]

    Iterates over the tails of this traversable collection.

    Iterates over the tails of this traversable collection. The first value will be this traversable collection and the final one will be an empty traversable collection, with the intervening values the results of successive applications of tail.

    returns

    an iterator over all the tails of this traversable collection

    Example:
    1. List(1,2,3).tails = Iterator(List(1,2,3), List(2,3), List(3), Nil)

  91. def take(n: Int): Repr

    Selects first n elements.

    Selects first n elements.

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    n

    the number of elements to take from this traversable collection.

    returns

    a traversable collection consisting only of the first n elements of this traversable collection, or else the whole traversable collection, if it has less than n elements.

    Definition Classes
    TraversableLikeGenTraversableLike
  92. def takeWhile(p: (A) ⇒ Boolean): Repr

    Takes longest prefix of elements that satisfy a predicate.

    Takes longest prefix of elements that satisfy a predicate.

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    returns

    the longest prefix of this traversable collection whose elements all satisfy the predicate p.

    Definition Classes
    TraversableLikeGenTraversableLike
  93. def thisCollection: Traversable[A]

    The underlying collection seen as an instance of Traversable.

    The underlying collection seen as an instance of Traversable. By default this is implemented as the current collection object itself, but this can be overridden.

    Attributes
    protected[this]
  94. def to[Col[_]]: Col[A]

    [use case] Converts this traversable collection into another by copying all elements.

    [use case]

    Converts this traversable collection into another by copying all elements.

    Note: will not terminate for infinite-sized collections.

    Col

    The collection type to build.

    returns

    a new collection containing all elements of this traversable collection.

    Definition Classes
    TraversableLikeTraversableOnceGenTraversableOnce
    Full Signature

    def to[Col[_]](implicit cbf: CanBuildFrom[Nothing, A, Col[A]]): Col[A]

  95. def toArray: Array[A]

    [use case] Converts this traversable collection to an array.

    [use case]

    Converts this traversable collection to an array.

    Note: will not terminate for infinite-sized collections.

    returns

    an array containing all elements of this traversable collection. An ClassTag must be available for the element type of this traversable collection.

    Definition Classes
    TraversableOnceGenTraversableOnce
    Full Signature

    def toArray[B >: A](implicit arg0: ClassTag[B]): Array[B]

  96. def toBuffer[B >: A]: Buffer[B]

    Converts this traversable collection to a mutable buffer.

    Converts this traversable collection to a mutable buffer.

    Note: will not terminate for infinite-sized collections.

    returns

    a buffer containing all elements of this traversable collection.

    Definition Classes
    TraversableOnceGenTraversableOnce
  97. def toCollection(repr: Repr): Traversable[A]

    A conversion from collections of type Repr to Traversable objects.

    A conversion from collections of type Repr to Traversable objects. By default this is implemented as just a cast, but this can be overridden.

    Attributes
    protected[this]
  98. def toIndexedSeq: immutable.IndexedSeq[A]

    Converts this traversable collection to an indexed sequence.

    Converts this traversable collection to an indexed sequence.

    Note: will not terminate for infinite-sized collections.

    returns

    an indexed sequence containing all elements of this traversable collection.

    Definition Classes
    TraversableOnceGenTraversableOnce
  99. def toIterable: Iterable[A]

    Converts this traversable collection to an iterable collection.

    Converts this traversable collection to an iterable collection. Note that the choice of target Iterable is lazy in this default implementation as this TraversableOnce may be lazy and unevaluated (i.e. it may be an iterator which is only traversable once).

    Note: will not terminate for infinite-sized collections.

    returns

    an Iterable containing all elements of this traversable collection.

    Definition Classes
    TraversableOnceGenTraversableOnce
  100. def toIterator: Iterator[A]

    Returns an Iterator over the elements in this traversable collection.

    Returns an Iterator over the elements in this traversable collection. Will return the same Iterator if this instance is already an Iterator.

    Note: will not terminate for infinite-sized collections.

    returns

    an Iterator containing all elements of this traversable collection.

    Definition Classes
    TraversableLikeGenTraversableOnce
  101. def toList: List[A]

    Converts this traversable collection to a list.

    Converts this traversable collection to a list.

    Note: will not terminate for infinite-sized collections.

    returns

    a list containing all elements of this traversable collection.

    Definition Classes
    TraversableOnceGenTraversableOnce
  102. def toMap[T, U]: Map[T, U]

    [use case] Converts this traversable collection to a map.

    [use case]

    Converts this traversable collection to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.

    Note: will not terminate for infinite-sized collections.

    returns

    a map of type immutable.Map[T, U] containing all key/value pairs of type (T, U) of this traversable collection.

    Definition Classes
    TraversableOnceGenTraversableOnce
    Full Signature

    def toMap[T, U](implicit ev: <:<[A, (T, U)]): immutable.Map[T, U]

  103. def toParArray: ParArray[A]

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to TraversableOps[A] performed by method traversable2ops in scala.collection.parallel.
    Definition Classes
    TraversableOps
  104. def toSeq: Seq[A]

    Converts this traversable collection to a sequence.

    Converts this traversable collection to a sequence. As with toIterable, it's lazy in this default implementation, as this TraversableOnce may be lazy and unevaluated.

    Note: will not terminate for infinite-sized collections.

    returns

    a sequence containing all elements of this traversable collection.

    Definition Classes
    TraversableOnceGenTraversableOnce
  105. def toSet[B >: A]: immutable.Set[B]

    Converts this traversable collection to a set.

    Converts this traversable collection to a set.

    Note: will not terminate for infinite-sized collections.

    returns

    a set containing all elements of this traversable collection.

    Definition Classes
    TraversableOnceGenTraversableOnce
  106. def toStream: Stream[A]

    Converts this traversable collection to a stream.

    Converts this traversable collection to a stream.

    Note: will not terminate for infinite-sized collections.

    returns

    a stream containing all elements of this traversable collection.

    Definition Classes
    TraversableLikeGenTraversableOnce
  107. def toString(): String

    Converts this traversable collection to a string.

    Converts this traversable collection to a string.

    returns

    a string representation of this collection. By default this string consists of the stringPrefix of this traversable collection, followed by all elements separated by commas and enclosed in parentheses.

    Definition Classes
    TraversableLikeAny
  108. def toTraversable: Traversable[A]

    Converts this traversable collection to an unspecified Traversable.

    Converts this traversable collection to an unspecified Traversable. Will return the same collection if this instance is already Traversable.

    Note: will not terminate for infinite-sized collections.

    returns

    a Traversable containing all elements of this traversable collection.

    Definition Classes
    TraversableLikeTraversableOnceGenTraversableOnce
  109. def toVector: Vector[A]

    Converts this traversable collection to a Vector.

    Converts this traversable collection to a Vector.

    Note: will not terminate for infinite-sized collections.

    returns

    a vector containing all elements of this traversable collection.

    Definition Classes
    TraversableOnceGenTraversableOnce
  110. def view(from: Int, until: Int): TraversableView[A, Repr]

    Creates a non-strict view of a slice of this traversable collection.

    Creates a non-strict view of a slice of this traversable collection.

    Note: the difference between view and slice is that view produces a view of the current traversable collection, whereas slice produces a new traversable collection.

    Note: view(from, to) is equivalent to view.slice(from, to)

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    from

    the index of the first element of the view

    until

    the index of the element following the view

    returns

    a non-strict view of a slice of this traversable collection, starting at index from and extending up to (but not including) index until.

  111. def view: TraversableView[A, Repr]

    Creates a non-strict view of this traversable collection.

    Creates a non-strict view of this traversable collection.

    returns

    a non-strict view of this traversable collection.

  112. def withFilter(p: (A) ⇒ Boolean): FilterMonadic[A, Repr]

    Creates a non-strict filter of this traversable collection.

    Creates a non-strict filter of this traversable collection.

    Note: the difference between c filter p and c withFilter p is that the former creates a new collection, whereas the latter only restricts the domain of subsequent map, flatMap, foreach, and withFilter operations.

    Note: might return different results for different runs, unless the underlying collection type is ordered.

    p

    the predicate used to test elements.

    returns

    an object of class WithFilter, which supports map, flatMap, foreach, and withFilter operations. All these operations apply to those elements of this traversable collection which satisfy the predicate p.

    Definition Classes
    TraversableLikeFilterMonadic
  113. def [B](y: B): (TraversableLike[A, Repr], B)

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to ArrowAssoc[TraversableLike[A, Repr]] performed by method any2ArrowAssoc in scala.Predef.
    Definition Classes
    ArrowAssoc

Shadowed Implicit Value Members

  1. def filter(p: (A) ⇒ Boolean): TraversableOnce[A]

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to MonadOps[A] performed by method MonadOps in scala.collection.TraversableOnce.
    Shadowing
    This implicitly inherited member is shadowed by one or more members in this class.
    To access this member you can use a type ascription:
    (traversableLike: MonadOps[A]).filter(p)
    Definition Classes
    MonadOps
  2. def flatMap[B](f: (A) ⇒ GenTraversableOnce[B]): TraversableOnce[B]

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to MonadOps[A] performed by method MonadOps in scala.collection.TraversableOnce.
    Shadowing
    This implicitly inherited member is shadowed by one or more members in this class.
    To access this member you can use a type ascription:
    (traversableLike: MonadOps[A]).flatMap(f)
    Definition Classes
    MonadOps
  3. def map[B](f: (A) ⇒ B): TraversableOnce[B]

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to MonadOps[A] performed by method MonadOps in scala.collection.TraversableOnce.
    Shadowing
    This implicitly inherited member is shadowed by one or more members in this class.
    To access this member you can use a type ascription:
    (traversableLike: MonadOps[A]).map(f)
    Definition Classes
    MonadOps
  4. val self: Any

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to StringAdd performed by method any2stringadd in scala.Predef.
    Shadowing
    This implicitly inherited member is ambiguous. One or more implicitly inherited members have similar signatures, so calling this member may produce an ambiguous implicit conversion compiler error.
    To access this member you can use a type ascription:
    (traversableLike: StringAdd).self
    Definition Classes
    StringAdd
  5. val self: Any

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to StringFormat performed by method any2stringfmt in scala.Predef.
    Shadowing
    This implicitly inherited member is ambiguous. One or more implicitly inherited members have similar signatures, so calling this member may produce an ambiguous implicit conversion compiler error.
    To access this member you can use a type ascription:
    (traversableLike: StringFormat).self
    Definition Classes
    StringFormat
  6. def withFilter(p: (A) ⇒ Boolean): Iterator[A]

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to MonadOps[A] performed by method MonadOps in scala.collection.TraversableOnce.
    Shadowing
    This implicitly inherited member is shadowed by one or more members in this class.
    To access this member you can use a type ascription:
    (traversableLike: MonadOps[A]).withFilter(p)
    Definition Classes
    MonadOps

Deprecated Value Members

  1. def /:\[A1 >: A](z: A1)(op: (A1, A1) ⇒ A1): A1

    A syntactic sugar for out of order folding.

    A syntactic sugar for out of order folding. See fold.

    Example:

    scala> val a = LinkedList(1,2,3,4)
    a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4)
    
    scala> val b = (a /:\ 5)(_+_)
    b: Int = 15
    Definition Classes
    GenTraversableOnce
    Annotations
    @deprecated
    Deprecated

    (Since version 2.10.0) use fold instead

  2. def x: TraversableLike[A, Repr]

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to ArrowAssoc[TraversableLike[A, Repr]] performed by method any2ArrowAssoc in scala.Predef.
    Shadowing
    This implicitly inherited member is ambiguous. One or more implicitly inherited members have similar signatures, so calling this member may produce an ambiguous implicit conversion compiler error.
    To access this member you can use a type ascription:
    (traversableLike: ArrowAssoc[TraversableLike[A, Repr]]).x
    Definition Classes
    ArrowAssoc
    Annotations
    @deprecated
    Deprecated

    (Since version 2.10.0) Use leftOfArrow instead

  3. def x: TraversableLike[A, Repr]

    Implicit information
    This member is added by an implicit conversion from TraversableLike[A, Repr] to Ensuring[TraversableLike[A, Repr]] performed by method any2Ensuring in scala.Predef.
    Shadowing
    This implicitly inherited member is ambiguous. One or more implicitly inherited members have similar signatures, so calling this member may produce an ambiguous implicit conversion compiler error.
    To access this member you can use a type ascription:
    (traversableLike: Ensuring[TraversableLike[A, Repr]]).x
    Definition Classes
    Ensuring
    Annotations
    @deprecated
    Deprecated

    (Since version 2.10.0) Use resultOfEnsuring instead

Inherited from GenTraversableLike[A, Repr]

Inherited from Parallelizable[A, ParIterable[A]]

Inherited from TraversableOnce[A]

Inherited from GenTraversableOnce[A]

Inherited from FilterMonadic[A, Repr]

Inherited from HasNewBuilder[A, Repr]

Inherited from Any

Inherited by implicit conversion traversable2ops from TraversableLike[A, Repr] to TraversableOps[A]

Inherited by implicit conversion MonadOps from TraversableLike[A, Repr] to MonadOps[A]

Inherited by implicit conversion any2stringadd from TraversableLike[A, Repr] to StringAdd

Inherited by implicit conversion any2stringfmt from TraversableLike[A, Repr] to StringFormat

Inherited by implicit conversion any2ArrowAssoc from TraversableLike[A, Repr] to ArrowAssoc[TraversableLike[A, Repr]]

Inherited by implicit conversion any2Ensuring from TraversableLike[A, Repr] to Ensuring[TraversableLike[A, Repr]]

Inherited by implicit conversion alternateImplicit from TraversableLike[A, Repr] to ForceImplicitAmbiguity

Ungrouped