The class of the iterator returned by the iterator
method.
The type implementing this traversable
The type implementing this traversable
A class supporting filtered operations.
Test two objects for inequality.
Test two objects for inequality.
true
if !(this == that), false otherwise.
Equivalent to x.hashCode
except for boxed numeric types.
Equivalent to x.hashCode
except for boxed numeric types.
For numerics, it returns a hash value which is consistent
with value equality: if two value type instances compare
as true, then ## will produce the same hash value for each
of them.
a hash value consistent with ==
[use case] Returns a new vector containing the elements from the left hand operand followed by the elements from the right hand operand.
Returns a new vector containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the vector is the most specific superclass encompassing the element types of the two operands (see example).
the element type of the returned collection.
the traversable to append.
a new collection of type That
which contains all elements
of this vector followed by all elements of that
.
Returns a new vector containing the elements from the left hand operand followed by the elements from the right hand operand.
Returns a new vector containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the vector is the most specific superclass encompassing the element types of the two operands (see example).
Example:
scala> val a = LinkedList(1) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1) scala> val b = LinkedList(2) b: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val c = a ++ b c: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2) scala> val d = LinkedList('a') d: scala.collection.mutable.LinkedList[Char] = LinkedList(a) scala> val e = c ++ d e: scala.collection.mutable.LinkedList[AnyVal] = LinkedList(1, 2, a)
the element type of the returned collection.
the class of the returned collection. In the standard library configuration,
That
is always Vector[B]
because an implicit of type CanBuildFrom[Vector, B, That]
is defined in object Vector
.
the traversable to append.
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
. This is usually the canBuildFrom
value
defined in object Vector
.
a new collection of type That
which contains all elements
of this vector followed by all elements of that
.
As with ++
, returns a new collection containing the elements from the left operand followed by the
elements from the right operand.
As with ++
, returns a new collection containing the elements from the left operand followed by the
elements from the right operand.
It differs from ++
in that the right operand determines the type of
the resulting collection rather than the left one.
Example:
scala> val x = List(1) x: List[Int] = List(1) scala> val y = LinkedList(2) y: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val z = x ++: y z: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2)
This overload exists because: for the implementation of ++:
we should
reuse that of ++
because many collections override it with more
efficient versions.
Since TraversableOnce
has no ++
method, we have to implement that
directly, but Traversable
and down can use the overload.
the element type of the returned collection.
the class of the returned collection. In the standard library configuration,
That
is always Vector[B]
because an implicit of type CanBuildFrom[Vector, B, That]
is defined in object Vector
.
the traversable to append.
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
. This is usually the canBuildFrom
value
defined in object Vector
.
a new vector which contains all elements of this vector
followed by all elements of that
.
[use case] Concatenates this vector with the elements of a traversable collection.
Concatenates this vector with the elements of a traversable collection. It differs from ++ in that the right operand determines the type of the resulting collection rather than the left one.
the element type of the returned collection.
the traversable to append.
a new collection of type That
which contains all elements
of this vector followed by all elements of that
.
Concatenates this vector with the elements of a traversable collection.
Concatenates this vector with the elements of a traversable collection. It differs from ++ in that the right operand determines the type of the resulting collection rather than the left one.
Example:
scala> val x = List(1) x: List[Int] = List(1) scala> val y = LinkedList(2) y: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val z = x ++: y z: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2)
the element type of the returned collection.
the class of the returned collection. In the standard library configuration,
That
is always Vector[B]
because an implicit of type CanBuildFrom[Vector, B, That]
is defined in object Vector
.
the traversable to append.
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
. This is usually the canBuildFrom
value
defined in object Vector
.
a new collection of type That
which contains all elements
of this vector followed by all elements of that
.
[use case] A copy of the vector with an element prepended.
A copy of the vector with an element prepended.
the prepended element
a new collection of type That
consisting of elem
followed
by all elements of this vector.
A copy of the vector with an element prepended.
A copy of the vector with an element prepended.
Note that :-ending operators are right associative (see example). Also, the original vector is not modified, so you will want to capture the result.
Example:
scala> val x = LinkedList(1) x: scala.collection.mutable.LinkedList[Int] = LinkedList(1) scala> val y = 2 +: x y: scala.collection.mutable.LinkedList[Int] = LinkedList(2, 1) scala> println(x) LinkedList(1)
the element type of the returned vector.
the class of the returned collection. In the standard library configuration,
That
is always Vector[B]
because an implicit of type CanBuildFrom[Vector, B, That]
is defined in object Vector
.
the prepended element
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
. This is usually the canBuildFrom
value
defined in object Vector
.
a new collection of type That
consisting of elem
followed
by all elements of this vector.
Applies a binary operator to a start value and all elements of this vector, going left to right.
Applies a binary operator to a start value and all elements of this vector, going left to right.
Note: /:
is alternate syntax for foldLeft
; z /: xs
is the same as
xs foldLeft z
.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (5 /: a)(_+_) b: Int = 15 scala> val c = (5 /: a)((x,y) => x + y) c: Int = 15
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this vector,
going left to right with the start value z
on the left:
op(...op(op(z, x1), x2), ..., xn)
where x_{1}, ..., x_{n}
are the elements of this vector.
A syntactic sugar for out of order folding.
A syntactic sugar for out of order folding. See fold
.
Example:
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (a /:\ 5)(_+_) b: Int = 15
[use case] A copy of this vector with an element appended.
A copy of this vector with an element appended.
the appended element
a new collection of type That
consisting of
all elements of this vector followed by elem
.
A copy of this vector with an element appended.
A copy of this vector with an element appended.
the element type of the returned vector.
the class of the returned collection. In the standard library configuration,
That
is always Vector[B]
because an implicit of type CanBuildFrom[Vector, B, That]
is defined in object Vector
.
the appended element
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
. This is usually the canBuildFrom
value
defined in object Vector
.
a new collection of type That
consisting of
all elements of this vector followed by elem
.
Applies a binary operator to all elements of this vector and a start value, going right to left.
Applies a binary operator to all elements of this vector and a start value, going right to left.
Note: :\
is alternate syntax for foldRight
; xs :\ z
is the same as
xs foldRight z
.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (a :\ 5)(_+_) b: Int = 15 scala> val c = (a :\ 5)((x,y) => x + y) c: Int = 15
the result type of the binary operator.
the start value
the binary operator
the result of inserting op
between consecutive elements of this vector,
going right to left with the start value z
on the right:
op(x1, op(x2, ... op(xn, z)...))
where x_{1}, ..., x_{n}
are the elements of this vector.
Test two objects for equality.
Test two objects for equality.
true
if the receiver object is equivalent to the argument; false
otherwise.
Appends all elements of this vector to a string builder.
Appends all elements of this vector to a string builder.
The written text consists of the string representations (w.r.t. the method
toString
) of all elements of this vector without any separator string.
Example:
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = new StringBuilder() b: StringBuilder = scala> val h = a.addString(b) b: StringBuilder = 1234
the string builder to which elements are appended.
the string builder b
to which elements were appended.
Appends all elements of this vector to a string builder using a separator string.
Appends all elements of this vector to a string builder using a separator
string. The written text consists of the string representations (w.r.t.
the method toString
) of all elements of this vector, separated by the
string sep
.
Example:
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = new StringBuilder() b: StringBuilder = scala> a.addString(b, ", ") res0: StringBuilder = 1, 2, 3, 4
the string builder to which elements are appended.
the separator string.
the string builder b
to which elements were appended.
Appends all elements of this vector to a string builder using start, end, and separator strings.
Appends all elements of this vector to a string builder using start, end,
and separator strings.
The written text begins with the string start
and ends with the string
end
. Inside, the string representations (w.r.t. the method toString
)
of all elements of this vector are separated by the string sep
.
Example:
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = new StringBuilder() b: StringBuilder = scala> a.addString(b, "LinkedList(", ", ", ")") res1: StringBuilder = LinkedList(1, 2, 3, 4)
the string builder to which elements are appended.
the starting string.
the separator string.
the ending string.
the string builder b
to which elements were appended.
Aggregates the results of applying an operator to subsequent elements.
Aggregates the results of applying an operator to subsequent elements.
This is a more general form of fold
and reduce
. It has similar
semantics, but does not require the result to be a supertype of the
element type. It traverses the elements in different partitions
sequentially, using seqop
to update the result, and then applies
combop
to results from different partitions. The implementation of
this operation may operate on an arbitrary number of collection
partitions, so combop
may be invoked an arbitrary number of times.
For example, one might want to process some elements and then produce
a Set
. In this case, seqop
would process an element and append it
to the list, while combop
would concatenate two lists from different
partitions together. The initial value z
would be an empty set.
pc.aggregate(Set[Int]())(_ += process(_), _ ++ _)
Another example is calculating geometric mean from a collection of doubles (one would typically require big doubles for this).
the type of accumulated results
the initial value for the accumulated result of the partition - this
will typically be the neutral element for the seqop
operator (e.g.
Nil
for list concatenation or 0
for summation)
an operator used to accumulate results within a partition
an associative operator used to combine results from different partitions
Composes this partial function with a transformation function that gets applied to results of this partial function.
Composes this partial function with a transformation function that gets applied to results of this partial function.
the result type of the transformation function.
the transformation function
a partial function with the same domain as this partial function, which maps
arguments x
to k(this(x))
.
Selects an element by its index in the vector.
Selects an element by its index in the vector.
Example:
scala> val x = LinkedList(1, 2, 3, 4, 5) x: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4, 5) scala> x(3) res1: Int = 4
the element of this vector at index idx
, where 0
indicates the first element.
if idx
does not satisfy 0 <= idx < length
.
Cast the receiver object to be of type T0
.
Cast the receiver object to be of type T0
.
Note that the success of a cast at runtime is modulo Scala's erasure semantics.
Therefore the expression 1.asInstanceOf[String]
will throw a ClassCastException
at
runtime, while the expression List(1).asInstanceOf[List[String]]
will not.
In the latter example, because the type argument is erased as part of compilation it is
not possible to check whether the contents of the list are of the requested type.
the receiver object.
if the receiver object is not an instance of the erasure of type T0
.
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind.
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind.
The object with which this vector should be compared
true
, if this vector can possibly equal that
, false
otherwise. The test
takes into consideration only the run-time types of objects but ignores their elements.
Create a copy of the receiver object.
[use case] Builds a new collection by applying a partial function to all elements of this vector on which the function is defined.
Builds a new collection by applying a partial function to all elements of this vector on which the function is defined.
the element type of the returned collection.
the partial function which filters and maps the vector.
a new collection of type That
resulting from applying the partial function
pf
to each element on which it is defined and collecting the results.
The order of the elements is preserved.
Builds a new collection by applying a partial function to all elements of this vector on which the function is defined.
Builds a new collection by applying a partial function to all elements of this vector on which the function is defined.
the element type of the returned collection.
the class of the returned collection. In the standard library configuration,
That
is always Vector[B]
because an implicit of type CanBuildFrom[Vector, B, That]
is defined in object Vector
.
the partial function which filters and maps the vector.
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
. This is usually the canBuildFrom
value
defined in object Vector
.
a new collection of type That
resulting from applying the partial function
pf
to each element on which it is defined and collecting the results.
The order of the elements is preserved.
Finds the first element of the vector for which the given partial function is defined, and applies the partial function to it.
Finds the first element of the vector for which the given partial function is defined, and applies the partial function to it.
the partial function
an option value containing pf applied to the first
value for which it is defined, or None
if none exists.
Seq("a", 1, 5L).collectFirst({ case x: Int => x*10 }) = Some(10)
Iterates over combinations.
Iterates over combinations.
An Iterator which traverses the possible n-element combinations of this vector.
"abbbc".combinations(2) = Iterator(ab, ac, bb, bc)
The factory companion object that builds instances of class Vector.
The factory companion object that builds instances of class Vector.
(or its Iterable
superclass where class Vector is not a Seq
.)
Composes two instances of Function1 in a new Function1, with this function applied last.
Composes two instances of Function1 in a new Function1, with this function applied last.
the type to which function g
can be applied
a function A => T1
a new function f
such that f(x) == apply(g(x))
Tests whether this vector contains a given value as an element.
Tests whether this vector contains a given value as an element.
the element to test.
true
if this vector has an element that is
is equal (wrt ==
) to elem
, false
otherwise.
Tests whether this vector contains a given sequence as a slice.
Tests whether this vector contains a given sequence as a slice.
the sequence to test
true
if this vector contains a slice with the same elements
as that
, otherwise false
.
[use case] Copies elements of this vector to an array.
Copies elements of this vector to an array.
Fills the given array xs
with at most len
elements of
this vector, starting at position start
.
Copying will stop once either the end of the current vector is reached,
or the end of the array is reached, or len
elements have been copied.
the array to fill.
the starting index.
the maximal number of elements to copy.
Copies elements of this vector to an array.
Copies elements of this vector to an array.
Fills the given array xs
with at most len
elements of
this vector, starting at position start
.
Copying will stop once either the end of the current vector is reached,
or the end of the array is reached, or len
elements have been copied.
the type of the elements of the array.
the array to fill.
the starting index.
the maximal number of elements to copy.
[use case] Copies values of this vector to an array.
Copies values of this vector to an array.
Fills the given array xs
with values of this vector.
Copying will stop once either the end of the current vector is reached,
or the end of the array is reached.
the array to fill.
Copies values of this vector to an array.
Copies values of this vector to an array.
Fills the given array xs
with values of this vector.
Copying will stop once either the end of the current vector is reached,
or the end of the array is reached.
the type of the elements of the array.
the array to fill.
[use case] Copies values of this vector to an array.
Copies values of this vector to an array.
Fills the given array xs
with values of this vector, beginning at index start
.
Copying will stop once either the end of the current vector is reached,
or the end of the array is reached.
the array to fill.
the starting index.
Copies values of this vector to an array.
Copies values of this vector to an array.
Fills the given array xs
with values of this vector, beginning at index start
.
Copying will stop once either the end of the current vector is reached,
or the end of the array is reached.
the type of the elements of the array.
the array to fill.
the starting index.
Copies all elements of this vector to a buffer.
Copies all elements of this vector to a buffer.
The buffer to which elements are copied.
Tests whether every element of this vector relates to the corresponding element of another sequence by satisfying a test predicate.
Tests whether every element of this vector relates to the corresponding element of another sequence by satisfying a test predicate.
the type of the elements of that
the other sequence
the test predicate, which relates elements from both sequences
true
if both sequences have the same length and
p(x, y)
is true
for all corresponding elements x
of this vector
and y
of that
, otherwise false
.
Counts the number of elements in the vector which satisfy a predicate.
Counts the number of elements in the vector which satisfy a predicate.
the predicate used to test elements.
the number of elements satisfying the predicate p
.
[use case] Computes the multiset difference between this vector and another sequence.
Computes the multiset difference between this vector and another sequence.
the sequence of elements to remove
a new collection of type That
which contains all elements of this vector
except some of occurrences of elements that also appear in that
.
If an element value x
appears
n times in that
, then the first n occurrences of x
will not form
part of the result, but any following occurrences will.
Computes the multiset difference between this vector and another sequence.
Computes the multiset difference between this vector and another sequence.
the element type of the returned vector.
the sequence of elements to remove
a new collection of type That
which contains all elements of this vector
except some of occurrences of elements that also appear in that
.
If an element value x
appears
n times in that
, then the first n occurrences of x
will not form
part of the result, but any following occurrences will.
Builds a new vector from this vector without any duplicate elements.
Builds a new vector from this vector without any duplicate elements.
A new vector which contains the first occurrence of every element of this vector.
Selects all elements except first n ones.
Selects all elements except first n ones.
the number of elements to drop from this vector.
a vector consisting of all elements of this vector except the first n
ones, or else the
empty vector, if this vector has less than n
elements.
Selects all elements except last n ones.
Selects all elements except last n ones.
The number of elements to take
a vector consisting of all elements of this vector except the last n
ones, or else the
empty vector, if this vector has less than n
elements.
Drops longest prefix of elements that satisfy a predicate.
Drops longest prefix of elements that satisfy a predicate.
The predicate used to test elements.
the longest suffix of this vector whose first element
does not satisfy the predicate p
.
Tests whether this vector ends with the given sequence.
Tests whether this vector ends with the given sequence.
the sequence to test
true
if this vector has that
as a suffix, false
otherwise.
Tests whether the argument (arg0
) is a reference to the receiver object (this
).
Tests whether the argument (arg0
) is a reference to the receiver object (this
).
The eq
method implements an equivalence relation on
non-null instances of AnyRef
, and has three additional properties:
x
and y
of type AnyRef
, multiple invocations of
x.eq(y)
consistently returns true
or consistently returns false
.x
of type AnyRef
, x.eq(null)
and null.eq(x)
returns false
.null.eq(null)
returns true
. When overriding the equals
or hashCode
methods, it is important to ensure that their behavior is
consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2
), they
should be equal to each other (o1 == o2
) and they should hash to the same value (o1.hashCode == o2.hashCode
).
true
if the argument is a reference to the receiver object; false
otherwise.
The equals method for arbitrary sequences.
The equals method for arbitrary sequences. Compares this sequence to some other object.
The object to compare the sequence to
true
if that
is a sequence that has the same elements as
this sequence in the same order, false
otherwise
Tests whether a predicate holds for some of the elements of this vector.
Tests whether a predicate holds for some of the elements of this vector.
the predicate used to test elements.
true
if the given predicate p
holds for some of the
elements of this vector, otherwise false
.
Selects all elements of this vector which satisfy a predicate.
Selects all elements of this vector which satisfy a predicate.
the predicate used to test elements.
a new vector consisting of all elements of this vector that satisfy the given
predicate p
. The order of the elements is preserved.
Selects all elements of this vector which do not satisfy a predicate.
Selects all elements of this vector which do not satisfy a predicate.
the predicate used to test elements.
a new vector consisting of all elements of this vector that do not satisfy the given
predicate p
. The order of the elements is preserved.
Called by the garbage collector on the receiver object when there are no more references to the object.
Called by the garbage collector on the receiver object when there are no more references to the object.
The details of when and if the finalize
method is invoked, as
well as the interaction between finalize
and non-local returns
and exceptions, are all platform dependent.
Finds the first element of the vector satisfying a predicate, if any.
Finds the first element of the vector satisfying a predicate, if any.
the predicate used to test elements.
an option value containing the first element in the vector
that satisfies p
, or None
if none exists.
[use case] Builds a new collection by applying a function to all elements of this vector and using the elements of the resulting collections.
Builds a new collection by applying a function to all elements of this vector and using the elements of the resulting collections. For example:
the element type of the returned collection.
the function to apply to each element.
a new collection of type That
resulting from applying the given collection-valued function
f
to each element of this vector and concatenating the results.
Builds a new collection by applying a function to all elements of this vector and using the elements of the resulting collections.
Builds a new collection by applying a function to all elements of this vector and using the elements of the resulting collections. For example:
def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")
The type of the resulting collection is guided by the static type of vector. This might cause unexpected results sometimes. For example:
// lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet) // lettersOf will return a Set[Char], not a Seq def lettersOf(words: Seq[String]) = words.toSet flatMap (word => word.toSeq) // xs will be a an Iterable[Int] val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2) // ys will be a Map[Int, Int] val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)
the element type of the returned collection.
the class of the returned collection. In the standard library configuration,
That
is always Vector[B]
because an implicit of type CanBuildFrom[Vector, B, That]
is defined in object Vector
.
the function to apply to each element.
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
. This is usually the canBuildFrom
value
defined in object Vector
.
a new collection of type That
resulting from applying the given collection-valued function
f
to each element of this vector and concatenating the results.
[use case] Converts this vector of traversable collections into a vector formed by the elements of these traversable collections.
Converts this vector of traversable collections into a vector formed by the elements of these traversable collections.
the type of the elements of each traversable collection.
a new vector resulting from concatenating all element vectors.
Folds the elements of this vector using the specified associative binary operator.
Folds the elements of this vector using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
a type parameter for the binary operator, a supertype of A
.
a neutral element for the fold operation; may be added to the result
an arbitrary number of times, and must not change the result (e.g., Nil
for list concatenation,
0 for addition, or 1 for multiplication.)
a binary operator that must be associative
the result of applying fold operator op
between all the elements and z
Applies a binary operator to a start value and all elements of this vector, going left to right.
Applies a binary operator to a start value and all elements of this vector, going left to right.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this vector,
going left to right with the start value z
on the left:
op(...op(z, x1), x2, ..., xn)
where x_{1}, ..., x_{n}
are the elements of this vector.
Applies a binary operator to all elements of this vector and a start value, going right to left.
Applies a binary operator to all elements of this vector and a start value, going right to left.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this vector,
going right to left with the start value z
on the right:
op(x1, op(x2, ... op(xn, z)...))
where x_{1}, ..., x_{n}
are the elements of this vector.
Tests whether a predicate holds for all elements of this vector.
Tests whether a predicate holds for all elements of this vector.
the predicate used to test elements.
true
if the given predicate p
holds for all elements
of this vector, otherwise false
.
[use case] Applies a function f
to all elements of this vector.
Applies a function f
to all elements of this vector.
the function that is applied for its side-effect to every element.
The result of function f
is discarded.
Applies a function f
to all elements of this vector.
Applies a function f
to all elements of this vector.
Note: this method underlies the implementation of most other bulk operations. Subclasses should re-implement this method if a more efficient implementation exists.
the type parameter describing the result of function f
.
This result will always be ignored. Typically U
is Unit
,
but this is not necessary.
the function that is applied for its side-effect to every element.
The result of function f
is discarded.
The generic builder that builds instances of Vector at arbitrary element types.
The generic builder that builds instances of Vector at arbitrary element types.
A representation that corresponds to the dynamic class of the receiver object.
A representation that corresponds to the dynamic class of the receiver object.
The nature of the representation is platform dependent.
a representation that corresponds to the dynamic class of the receiver object.
not specified by SLS as a member of AnyRef
Partitions this vector into a map of vectors according to some discriminator function.
Partitions this vector into a map of vectors according to some discriminator function.
Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new vector.
the type of keys returned by the discriminator function.
the discriminator function.
A map from keys to vectors such that the following invariant holds:
(xs partition f)(k) = xs filter (x => f(x) == k)
That is, every key k
is bound to a vector of those elements x
for which f(x)
equals k
.
Partitions elements in fixed size vectors.
Partitions elements in fixed size vectors.
the number of elements per group
An iterator producing vectors of size size
, except the
last will be truncated if the elements don't divide evenly.
Iterator#grouped
Tests whether this vector is known to have a finite size.
Tests whether this vector is known to have a finite size.
All strict collections are known to have finite size. For a non-strict collection
such as Stream
, the predicate returns true
if all elements have been computed.
It returns false
if the stream is not yet evaluated to the end.
Note: many collection methods will not work on collections of infinite sizes.
true
if this collection is known to have finite size, false
otherwise.
Hashcodes for Vector produce a value from the hashcodes of all the elements of the vector.
Hashcodes for Vector produce a value from the hashcodes of all the elements of the vector.
the hash code value for this object.
Selects the first element of this vector.
Selects the first element of this vector.
the first element of this vector.
if the vector is empty.
Optionally selects the first element.
Optionally selects the first element.
the first element of this vector if it is nonempty, None
if it is empty.
[use case] Finds index of first occurrence of some value in this vector after or at some start index.
Finds index of first occurrence of some value in this vector after or at some start index.
the element value to search for.
the start index
the index >= from
of the first element of this vector that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds index of first occurrence of some value in this vector after or at some start index.
Finds index of first occurrence of some value in this vector after or at some start index.
the type of the element elem
.
the element value to search for.
the start index
the index >= from
of the first element of this vector that is equal (wrt ==
)
to elem
, or -1
, if none exists.
[use case] Finds index of first occurrence of some value in this vector.
Finds index of first occurrence of some value in this vector.
the element value to search for.
the index of the first element of this vector that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds index of first occurrence of some value in this vector.
Finds index of first occurrence of some value in this vector.
the type of the element elem
.
the element value to search for.
the index of the first element of this vector that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds first index after or at a start index where this vector contains a given sequence as a slice.
Finds first index after or at a start index where this vector contains a given sequence as a slice.
the sequence to test
the start index
the first index >= from
such that the elements of this vector starting at this index
match the elements of sequence that
, or -1
of no such subsequence exists.
Finds first index where this vector contains a given sequence as a slice.
Finds first index where this vector contains a given sequence as a slice.
the sequence to test
the first index such that the elements of this vector starting at this index
match the elements of sequence that
, or -1
of no such subsequence exists.
Finds index of the first element satisfying some predicate after or at some start index.
Finds index of the first element satisfying some predicate after or at some start index.
the predicate used to test elements.
the start index
the index >= from
of the first element of this vector that satisfies the predicate p
,
or -1
, if none exists.
Finds index of first element satisfying some predicate.
Finds index of first element satisfying some predicate.
the predicate used to test elements.
the index of the first element of this vector that satisfies the predicate p
,
or -1
, if none exists.
Produces the range of all indices of this sequence.
Produces the range of all indices of this sequence.
a Range
value from 0
to one less than the length of this vector.
Selects all elements except the last.
Selects all elements except the last.
a vector consisting of all elements of this vector except the last one.
if the vector is empty.
Iterates over the inits of this vector.
Iterates over the inits of this vector. The first value will be this
vector and the final one will be an empty vector, with the intervening
values the results of successive applications of init
.
an iterator over all the inits of this vector
List(1,2,3).inits = Iterator(List(1,2,3), List(1,2), List(1), Nil)
[use case] Computes the multiset intersection between this vector and another sequence.
Computes the multiset intersection between this vector and another sequence.
the sequence of elements to intersect with.
a new collection of type That
which contains all elements of this vector
which also appear in that
.
If an element value x
appears
n times in that
, then the first n occurrences of x
will be retained
in the result, but any following occurrences will be omitted.
Computes the multiset intersection between this vector and another sequence.
Computes the multiset intersection between this vector and another sequence.
the element type of the returned vector.
the sequence of elements to intersect with.
a new collection of type That
which contains all elements of this vector
which also appear in that
.
If an element value x
appears
n times in that
, then the first n occurrences of x
will be retained
in the result, but any following occurrences will be omitted.
Tests whether this vector contains given index.
Tests whether this vector contains given index.
The implementations of methods apply
and isDefinedAt
turn a Seq[A]
into
a PartialFunction[Int, A]
.
the index to test
true
if this vector contains an element at position idx
, false
otherwise.
Tests whether the vector is empty.
Tests whether the vector is empty.
true
if the vector contains no elements, false
otherwise.
Test whether the dynamic type of the receiver object is T0
.
Test whether the dynamic type of the receiver object is T0
.
Note that the result of the test is modulo Scala's erasure semantics.
Therefore the expression 1.isInstanceOf[String]
will return false
, while the
expression List(1).isInstanceOf[List[String]]
will return true
.
In the latter example, because the type argument is erased as part of compilation it is
not possible to check whether the contents of the list are of the specified type.
true
if the receiver object is an instance of erasure of type T0
; false
otherwise.
Tests whether this vector can be repeatedly traversed.
Tests whether this vector can be repeatedly traversed.
true
Creates a new iterator over all elements contained in this iterable object.
Creates a new iterator over all elements contained in this iterable object.
the new iterator
Selects the last element.
Selects the last element.
The last element of this vector.
If the vector is empty.
[use case] Finds index of last occurrence of some value in this vector before or at a given end index.
Finds index of last occurrence of some value in this vector before or at a given end index.
the element value to search for.
the end index.
the index <= end
of the last element of this vector that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds index of last occurrence of some value in this vector before or at a given end index.
Finds index of last occurrence of some value in this vector before or at a given end index.
the type of the element elem
.
the element value to search for.
the end index.
the index <= end
of the last element of this vector that is equal (wrt ==
)
to elem
, or -1
, if none exists.
[use case] Finds index of last occurrence of some value in this vector.
Finds index of last occurrence of some value in this vector.
the element value to search for.
the index of the last element of this vector that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds index of last occurrence of some value in this vector.
Finds index of last occurrence of some value in this vector.
the type of the element elem
.
the element value to search for.
the index of the last element of this vector that is equal (wrt ==
)
to elem
, or -1
, if none exists.
Finds last index before or at a given end index where this vector contains a given sequence as a slice.
Finds last index before or at a given end index where this vector contains a given sequence as a slice.
the sequence to test
the end index
the last index <= end
such that the elements of this vector starting at this index
match the elements of sequence that
, or -1
of no such subsequence exists.
Finds last index where this vector contains a given sequence as a slice.
Finds last index where this vector contains a given sequence as a slice.
the sequence to test
the last index such that the elements of this vector starting a this index
match the elements of sequence that
, or -1
of no such subsequence exists.
Finds index of last element satisfying some predicate before or at given end index.
Finds index of last element satisfying some predicate before or at given end index.
the predicate used to test elements.
the index <= end
of the last element of this vector that satisfies the predicate p
,
or -1
, if none exists.
Finds index of last element satisfying some predicate.
Finds index of last element satisfying some predicate.
the predicate used to test elements.
the index of the last element of this vector that satisfies the predicate p
,
or -1
, if none exists.
Optionally selects the last element.
Optionally selects the last element.
the last element of this vector$ if it is nonempty, None
if it is empty.
The length of the vector.
The length of the vector.
Note: xs.length
and xs.size
yield the same result.
the number of elements in this vector.
Compares the length of this vector to a test value.
Compares the length of this vector to a test value.
the test value that gets compared with the length.
A value x
where
x < 0 if this.length < len x == 0 if this.length == len x > 0 if this.length > len
The method as implemented here does not call length
directly; its running time
is O(length min len)
instead of O(length)
. The method should be overwritten
if computing length
is cheap.
Turns this partial function into an plain function returning an Option
result.
Turns this partial function into an plain function returning an Option
result.
a function that takes an argument x
to Some(this(x))
if this
is defined for x
, and to None
otherwise.
Function.unlift
[use case] Builds a new collection by applying a function to all elements of this vector.
Builds a new collection by applying a function to all elements of this vector.
the element type of the returned collection.
the function to apply to each element.
a new collection of type That
resulting from applying the given function
f
to each element of this vector and collecting the results.
Builds a new collection by applying a function to all elements of this vector.
Builds a new collection by applying a function to all elements of this vector.
the element type of the returned collection.
the class of the returned collection. In the standard library configuration,
That
is always Vector[B]
because an implicit of type CanBuildFrom[Vector, B, That]
is defined in object Vector
.
the function to apply to each element.
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
. This is usually the canBuildFrom
value
defined in object Vector
.
a new collection of type That
resulting from applying the given function
f
to each element of this vector and collecting the results.
[use case] Finds the largest element.
Finds the largest element.
the largest element of this vector with respect to the ordering cmp
.
Finds the largest element.
Finds the largest element.
The type over which the ordering is defined.
An ordering to be used for comparing elements.
the largest element of this vector with respect to the ordering cmp
.
[use case] Finds the smallest element.
Finds the smallest element.
the smallest element of this vector with respect to the ordering cmp
.
Finds the smallest element.
Finds the smallest element.
The type over which the ordering is defined.
An ordering to be used for comparing elements.
the smallest element of this vector with respect to the ordering cmp
.
Displays all elements of this vector in a string.
Displays all elements of this vector in a string.
a string representation of this vector. In the resulting string
the string representations (w.r.t. the method toString
)
of all elements of this vector follow each other without any
separator string.
Displays all elements of this vector in a string using a separator string.
Displays all elements of this vector in a string using a separator string.
the separator string.
a string representation of this vector. In the resulting string
the string representations (w.r.t. the method toString
)
of all elements of this vector are separated by the string sep
.
List(1, 2, 3).mkString("|") = "1|2|3"
Displays all elements of this vector in a string using start, end, and separator strings.
Displays all elements of this vector in a string using start, end, and separator strings.
the starting string.
the separator string.
the ending string.
a string representation of this vector. The resulting string
begins with the string start
and ends with the string
end
. Inside, the string representations (w.r.t. the method
toString
) of all elements of this vector are separated by
the string sep
.
List(1, 2, 3).mkString("(", "; ", ")") = "(1; 2; 3)"
Equivalent to !(this eq that)
.
Equivalent to !(this eq that)
.
true
if the argument is not a reference to the receiver object; false
otherwise.
The builder that builds instances of type Vector[A]
The builder that builds instances of type Vector[A]
Tests whether the vector is not empty.
Tests whether the vector is not empty.
true
if the vector contains at least one element, false
otherwise.
Wakes up a single thread that is waiting on the receiver object's monitor.
Wakes up a single thread that is waiting on the receiver object's monitor.
not specified by SLS as a member of AnyRef
Wakes up all threads that are waiting on the receiver object's monitor.
Wakes up all threads that are waiting on the receiver object's monitor.
not specified by SLS as a member of AnyRef
Composes this partial function with a fallback partial function which gets applied where this partial function is not defined.
Composes this partial function with a fallback partial function which gets applied where this partial function is not defined.
the argument type of the fallback function
the result type of the fallback function
the fallback function
a partial function which has as domain the union of the domains
of this partial function and that
. The resulting partial function
takes x
to this(x)
where this
is defined, and to that(x)
where it is not.
[use case] A copy of this vector with an element value appended until a given target length is reached.
A copy of this vector with an element value appended until a given target length is reached.
the target length
the padding value
a new collection of type That
consisting of
all elements of this vector followed by the minimal number of occurrences of elem
so
that the resulting collection has a length of at least len
.
A copy of this vector with an element value appended until a given target length is reached.
A copy of this vector with an element value appended until a given target length is reached.
the element type of the returned vector.
the class of the returned collection. In the standard library configuration,
That
is always Vector[B]
because an implicit of type CanBuildFrom[Vector, B, That]
is defined in object Vector
.
the target length
the padding value
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
. This is usually the canBuildFrom
value
defined in object Vector
.
a new collection of type That
consisting of
all elements of this vector followed by the minimal number of occurrences of elem
so
that the resulting collection has a length of at least len
.
Returns a parallel implementation of this collection.
Returns a parallel implementation of this collection.
For most collection types, this method creates a new parallel collection by copying
all the elements. For these collection, par
takes linear time. Mutable collections
in this category do not produce a mutable parallel collection that has the same
underlying dataset, so changes in one collection will not be reflected in the other one.
Specific collections (e.g. ParArray
or mutable.ParHashMap
) override this default
behaviour by creating a parallel collection which shares the same underlying dataset.
For these collections, par
takes constant or sublinear time.
All parallel collections return a reference to themselves.
a parallel implementation of this collection
The default par
implementation uses the combiner provided by this method
to create a new parallel collection.
The default par
implementation uses the combiner provided by this method
to create a new parallel collection.
a combiner for the parallel collection of type ParRepr
Partitions this vector in two vectors according to a predicate.
Partitions this vector in two vectors according to a predicate.
the predicate on which to partition.
a pair of vectors: the first vector consists of all elements that
satisfy the predicate p
and the second vector consists of all elements
that don't. The relative order of the elements in the resulting vectors
is the same as in the original vector.
[use case] Produces a new vector where a slice of elements in this vector is replaced by another sequence.
Produces a new vector where a slice of elements in this vector is replaced by another sequence.
the index of the first replaced element
the number of elements to drop in the original vector
a new vector consisting of all elements of this vector
except that replaced
elements starting from from
are replaced
by patch
.
Produces a new vector where a slice of elements in this vector is replaced by another sequence.
Produces a new vector where a slice of elements in this vector is replaced by another sequence.
the element type of the returned vector.
the class of the returned collection. In the standard library configuration,
That
is always Vector[B]
because an implicit of type CanBuildFrom[Vector, B, That]
is defined in object Vector
.
the index of the first replaced element
the replacement sequence
the number of elements to drop in the original vector
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
. This is usually the canBuildFrom
value
defined in object Vector
.
a new vector consisting of all elements of this vector
except that replaced
elements starting from from
are replaced
by patch
.
Iterates over distinct permutations.
Iterates over distinct permutations.
An Iterator which traverses the distinct permutations of this vector.
"abb".permutations = Iterator(abb, bab, bba)
Returns the length of the longest prefix whose elements all satisfy some predicate.
Returns the length of the longest prefix whose elements all satisfy some predicate.
the predicate used to test elements.
the length of the longest prefix of this vector
such that every element of the segment satisfies the predicate p
.
[use case] Multiplies up the elements of this collection.
Multiplies up the elements of this collection.
the product of all elements of this vector with respect to the *
operator in num
.
Multiplies up the elements of this collection.
Multiplies up the elements of this collection.
the result type of the *
operator.
an implicit parameter defining a set of numeric operations
which includes the *
operator to be used in forming the product.
the product of all elements of this vector with respect to the *
operator in num
.
Reduces the elements of this vector using the specified associative binary operator.
Reduces the elements of this vector using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A
.
A binary operator that must be associative.
The result of applying reduce operator op
between all the elements if the vector is nonempty.
if this vector is empty.
Optionally applies a binary operator to all elements of this vector, going left to right.
Optionally applies a binary operator to all elements of this vector, going left to right.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceLeft(op)
is this vector is nonempty,
None
otherwise.
Reduces the elements of this vector, if any, using the specified associative binary operator.
Reduces the elements of this vector, if any, using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A
.
A binary operator that must be associative.
An option value containing result of applying reduce operator op
between all
the elements if the collection is nonempty, and None
otherwise.
Applies a binary operator to all elements of this vector, going right to left.
Applies a binary operator to all elements of this vector, going right to left.
the result type of the binary operator.
the binary operator.
the result of inserting op
between consecutive elements of this vector,
going right to left:
op(x,,1,,, op(x,,2,,, ..., op(x,,n-1,,, x,,n,,)...))
where x_{1}, ..., x_{n}
are the elements of this vector.
if this vector is empty.
Optionally applies a binary operator to all elements of this vector, going right to left.
Optionally applies a binary operator to all elements of this vector, going right to left.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceRight(op)
is this vector is nonempty,
None
otherwise.
The collection of type vector underlying this TraversableLike
object.
The collection of type vector underlying this TraversableLike
object.
By default this is implemented as the TraversableLike
object itself,
but this can be overridden.
Returns new vector wih elements in reversed order.
Returns new vector wih elements in reversed order.
A new vector with all elements of this vector in reversed order.
An iterator yielding elements in reversed order.
[use case] Builds a new collection by applying a function to all elements of this vector and collecting the results in reversed order.
Builds a new collection by applying a function to all elements of this vector and collecting the results in reversed order.
the element type of the returned collection.
the function to apply to each element.
a new collection of type That
resulting from applying the given function
f
to each element of this vector and collecting the results in reversed order.
Note: xs.reverseMap(f)
is the same as xs.reverse.map(f)
but might be more efficient.
Builds a new collection by applying a function to all elements of this vector and collecting the results in reversed order.
Builds a new collection by applying a function to all elements of this vector and collecting the results in reversed order.
Note: xs.reverseMap(f)
is the same as xs.reverse.map(f)
but might be more efficient.
the element type of the returned collection.
the class of the returned collection. In the standard library configuration,
That
is always Vector[B]
because an implicit of type CanBuildFrom[Vector, B, That]
is defined in object Vector
.
the function to apply to each element.
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
. This is usually the canBuildFrom
value
defined in object Vector
.
a new collection of type That
resulting from applying the given function
f
to each element of this vector and collecting the results in reversed order.
[use case] Checks if the other iterable collection contains the same elements in the same order as this vector.
Checks if the other iterable collection contains the same elements in the same order as this vector.
the collection to compare with.
true
, if both collections contain the same elements in the same order, false
otherwise.
Checks if the other iterable collection contains the same elements in the same order as this vector.
Checks if the other iterable collection contains the same elements in the same order as this vector.
the type of the elements of collection that
.
the collection to compare with.
true
, if both collections contain the same elements in the same order, false
otherwise.
Computes a prefix scan of the elements of the collection.
Computes a prefix scan of the elements of the collection.
Note: The neutral element z
may be applied more than once.
element type of the resulting collection
type of the resulting collection
neutral element for the operator op
the associative operator for the scan
combiner factory which provides a combiner
a new vector containing the prefix scan of the elements in this vector
Produces a collection containing cummulative results of applying the operator going left to right.
Produces a collection containing cummulative results of applying the operator going left to right.
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
. This is usually the canBuildFrom
value
defined in object Vector
.
collection with intermediate results
Produces a collection containing cummulative results of applying the operator going right to left.
Produces a collection containing cummulative results of applying the operator going right to left. The head of the collection is the last cummulative result.
Example:
List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
. This is usually the canBuildFrom
value
defined in object Vector
.
collection with intermediate results
(Changed in version 2.9.0) The behavior of scanRight
has changed. The previous behavior can be reproduced with scanRight.reverse.
Computes length of longest segment whose elements all satisfy some predicate.
Computes length of longest segment whose elements all satisfy some predicate.
the predicate used to test elements.
the index where the search starts.
the length of the longest segment of this vector starting from index from
such that every element of the segment satisfies the predicate p
.
A version of this collection with all of the operations implemented sequentially (i.
A version of this collection with all of the operations implemented sequentially (i.e. in a single-threaded manner).
This method returns a reference to this collection. In parallel collections, it is redefined to return a sequential implementation of this collection. In both cases, it has O(1) complexity.
a sequential view of the collection.
The size of this vector, equivalent to length
.
The size of this vector, equivalent to length
.
the number of elements in this vector.
Selects an interval of elements.
Selects an interval of elements. The returned collection is made up
of all elements x
which satisfy the invariant:
from <= indexOf(x) < until
the lowest index to include from this vector.
the highest index to EXCLUDE from this vector.
a vector containing the elements greater than or equal to
index from
extending up to (but not including) index until
of this vector.
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.)
the number of elements per group
An iterator producing vectors of size size
, except the
last and the only element will be truncated if there are
fewer elements than size.
Iterator#sliding
Sorts this Vector according to the Ordering which results from transforming an implicitly given Ordering with a transformation function.
Sorts this Vector according to the Ordering which results from transforming an implicitly given Ordering with a transformation function.
the target type of the transformation f
, and the type where
the ordering ord
is defined.
the transformation function mapping elements
to some other domain B
.
the ordering assumed on domain B
.
a vector consisting of the elements of this vector
sorted according to the ordering where x < y
if
ord.lt(f(x), f(y))
.
val words = "The quick brown fox jumped over the lazy dog".split(' ') // this works because scala.Ordering will implicitly provide an Ordering[Tuple2[Int, Char]] words.sortBy(x => (x.length, x.head)) res0: Array[String] = Array(The, dog, fox, the, lazy, over, brown, quick, jumped)
scala.math.Ordering
Sorts this vector according to a comparison function.
Sorts this vector according to a comparison function.
The sort is stable. That is, elements that are equal wrt lt
appear in the
same order in the sorted sequence as in the original.
the comparison function which tests whether its first argument precedes its second argument in the desired ordering.
a vector consisting of the elements of this vector
sorted according to the comparison function lt
.
List("Steve", "Tom", "John", "Bob").sortWith(_.compareTo(_) < 0) = List("Bob", "John", "Steve", "Tom")
Sorts this vector according to an Ordering.
Sorts this vector according to an Ordering.
The sort is stable. That is, elements that are equal wrt lt
appear in the
same order in the sorted sequence as in the original.
the ordering to be used to compare elements.
a vector consisting of the elements of this vector
sorted according to the ordering ord
.
scala.math.Ordering
Splits this vector into a prefix/suffix pair according to a predicate.
Splits this vector into a prefix/suffix pair according to a predicate.
Note: c span p
is equivalent to (but possibly more efficient than)
(c takeWhile p, c dropWhile p)
, provided the evaluation of the
predicate p
does not cause any side-effects.
the test predicate
a pair consisting of the longest prefix of this vector whose
elements all satisfy p
, and the rest of this vector.
Splits this vector into two at a given position.
Splits this vector into two at a given position.
Note: c splitAt n
is equivalent to (but possibly more efficient than)
(c take n, c drop n)
.
the position at which to split.
a pair of vectors consisting of the first n
elements of this vector, and the other elements.
Tests whether this vector contains the given sequence at a given index.
Tests whether this vector contains the given sequence at a given index.
If the both the receiver object, this
and
the argument, that
are infinite sequences
this method may not terminate.
the sequence to test
the index where the sequence is searched.
true
if the sequence that
is contained in this vector at index offset
,
otherwise false
.
Tests whether this vector starts with the given sequence.
Tests whether this vector starts with the given sequence.
the sequence to test
true
if this collection has that
as a prefix, false
otherwise.
Defines the prefix of this object's toString
representation.
Defines the prefix of this object's toString
representation.
a string representation which starts the result of toString
applied to this vector. By default the string prefix is the
simple name of the collection class vector.
[use case] Sums up the elements of this collection.
Sums up the elements of this collection.
the sum of all elements of this vector with respect to the +
operator in num
.
Sums up the elements of this collection.
Sums up the elements of this collection.
the result type of the +
operator.
an implicit parameter defining a set of numeric operations
which includes the +
operator to be used in forming the sum.
the sum of all elements of this vector with respect to the +
operator in num
.
Selects all elements except the first.
Selects all elements except the first.
a vector consisting of all elements of this vector except the first one.
if the vector is empty.
Iterates over the tails of this vector.
Iterates over the tails of this vector. The first value will be this
vector and the final one will be an empty vector, with the intervening
values the results of successive applications of tail
.
an iterator over all the tails of this vector
List(1,2,3).tails = Iterator(List(1,2,3), List(2,3), List(3), Nil)
Selects first n elements.
Selects first n elements.
Tt number of elements to take from this vector.
a vector consisting only of the first n
elements of this vector,
or else the whole vector, if it has less than n
elements.
Selects last n elements.
Selects last n elements.
the number of elements to take
a vector consisting only of the last n
elements of this vector, or else the
whole vector, if it has less than n
elements.
Takes longest prefix of elements that satisfy a predicate.
Takes longest prefix of elements that satisfy a predicate.
The predicate used to test elements.
the longest prefix of this vector whose elements all satisfy
the predicate p
.
The underlying collection seen as an instance of Vector
.
The underlying collection seen as an instance of Vector
.
By default this is implemented as the current collection object itself,
but this can be overridden.
[use case] Converts this vector to an array.
Converts this vector to an array.
an array containing all elements of this vector.
Converts this vector to an array.
Converts this vector to an array.
the type of the elements of the array. A ClassManifest
for
this type must be available.
an array containing all elements of this vector.
Overridden for efficiency
Overridden for efficiency
a buffer containing all elements of this vector.
A conversion from collections of type Repr
to Vector
objects.
A conversion from collections of type Repr
to Vector
objects.
By default this is implemented as just a cast, but this can be overridden.
Converts this vector to an indexed sequence.
Converts this vector to an indexed sequence.
an indexed sequence containing all elements of this vector.
Converts this vector to an iterable collection.
Converts this vector to an iterable collection. Note that
the choice of target Iterable
is lazy in this default implementation
as this TraversableOnce
may be lazy and unevaluated (i.e. it may
be an iterator which is only traversable once).
an Iterable
containing all elements of this vector.
Returns an Iterator over the elements in this vector.
Returns an Iterator over the elements in this vector. Will return the same Iterator if this instance is already an Iterator.
an Iterator containing all elements of this vector.
Converts this vector to a list.
Converts this vector to a list.
a list containing all elements of this vector.
[use case] Converts this vector to a map.
Converts this vector to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.
a map containing all elements of this vector.
Converts this vector to a map.
Converts this vector to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.
a map containing all elements of this vector.
Converts this vector to a sequence.
Converts this vector to a sequence.
Overridden for efficiency.
a sequence containing all elements of this vector.
Converts this vector to a set.
Converts this vector to a set.
a set containing all elements of this vector.
Converts this vector to a stream.
Converts this vector to a stream.
a stream containing all elements of this vector.
Converts this vector to a string.
Converts this vector to a string.
a string representation of this collection. By default this
string consists of the stringPrefix
of this vector,
followed by all elements separated by commas and enclosed in parentheses.
Converts this vector to an unspecified Traversable.
Converts this vector to an unspecified Traversable. Will return the same collection if this instance is already Traversable.
a Traversable containing all elements of this vector.
Transposes this vector of traversable collections into a vector of vectors.
Transposes this vector of traversable collections into a vector of vectors.
the type of the elements of each traversable collection.
an implicit conversion which asserts that the
element type of this vector is a Traversable
.
a two-dimensional vector of vectors which has as nth row the nth column of this vector.
(Changed in version 2.9.0) transpose
throws an IllegalArgumentException
if collections are not uniformly sized.
if all collections in this vector are not of the same size.
[use case] Produces a new sequence which contains all elements of this vector and also all elements of a given sequence.
Produces a new sequence which contains all elements of this vector and also all elements of
a given sequence. xs union ys
is equivalent to xs ++ ys
.
the sequence to add.
a new collection of type That
which contains all elements of this vector
followed by all elements of that
.
Produces a new sequence which contains all elements of this vector and also all elements of a given sequence.
Produces a new sequence which contains all elements of this vector and also all elements of
a given sequence. xs union ys
is equivalent to xs ++ ys
.
Another way to express this
is that xs union ys
computes the order-presevring multi-set union of xs
and ys
.
union
is hence a counter-part of diff
and intersect
which also work on multi-sets.
the element type of the returned vector.
the class of the returned collection. In the standard library configuration,
That
is always Vector[B]
because an implicit of type CanBuildFrom[Vector, B, That]
is defined in object Vector
.
the sequence to add.
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
. This is usually the canBuildFrom
value
defined in object Vector
.
a new collection of type That
which contains all elements of this vector
followed by all elements of that
.
Converts this vector of pairs into two collections of the first and second half of each pair.
Converts this vector of pairs into two collections of the first and second half of each pair.
an implicit conversion which asserts that the element type of this vector is a pair.
a pair vectors, containing the first, respectively second half of each element pair of this vector.
Converts this vector of triples into three collections of the first, second, and third element of each triple.
Converts this vector of triples into three collections of the first, second, and third element of each triple.
an implicit conversion which asserts that the element type of this vector is a triple.
a triple vectors, containing the first, second, respectively third member of each element triple of this vector.
[use case] A copy of this vector with one single replaced element.
A copy of this vector with one single replaced element.
the position of the replacement
the replacing element
a new vector which is a copy of this vector with the element at position
index replaced by
elem.
A copy of this vector with one single replaced element.
A copy of this vector with one single replaced element.
the element type of the returned vector.
the class of the returned collection. In the standard library configuration,
That
is always Vector[B]
because an implicit of type CanBuildFrom[Vector, B, That]
is defined in object Vector
.
the position of the replacement
the replacing element
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type B
. This is usually the canBuildFrom
value
defined in object Vector
.
a new vector which is a copy of this vector with the element at position
index replaced by
elem.
Creates a non-strict view of a slice of this vector.
Creates a non-strict view of a slice of this vector.
Note: the difference between view
and slice
is that view
produces
a view of the current vector, whereas slice
produces a new vector.
Note: view(from, to)
is equivalent to view.slice(from, to)
the index of the first element of the view
the index of the element following the view
a non-strict view of a slice of this vector, starting at index from
and extending up to (but not including) index until
.
Creates a non-strict view of this vector.
Creates a non-strict view of this vector.
a non-strict view of this vector.
Creates a non-strict filter of this vector.
Creates a non-strict filter of this vector.
Note: the difference between c filter p
and c withFilter p
is that
the former creates a new collection, whereas the latter only
restricts the domain of subsequent map
, flatMap
, foreach
,
and withFilter
operations.
the predicate used to test elements.
an object of class WithFilter
, which supports
map
, flatMap
, foreach
, and withFilter
operations.
All these operations apply to those elements of this vector which
satisfy the predicate p
.
[use case] Returns a vector formed from this vector and another iterable collection by combining corresponding elements in pairs.
Returns a vector formed from this vector and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
a new collection of type That
containing pairs consisting of
corresponding elements of this vector and that
. The length
of the returned collection is the minimum of the lengths of this vector and that
.
Returns a vector formed from this vector and another iterable collection by combining corresponding elements in pairs.
Returns a vector formed from this vector and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.
the type of the first half of the returned pairs (this is always a supertype
of the collection's element type A
).
the type of the second half of the returned pairs
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type (A1, B)
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, (A1, B), That]
.
is found.
The iterable providing the second half of each result pair
an implicit value of class CanBuildFrom
which determines the
result class That
from the current representation type Repr
and the new element type (A1, B)
.
a new collection of type That
containing pairs consisting of
corresponding elements of this vector and that
. The length
of the returned collection is the minimum of the lengths of this vector and that
.
[use case] Returns a vector formed from this vector and another iterable collection by combining corresponding elements in pairs.
Returns a vector formed from this vector and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
the iterable providing the second half of each result pair
the element to be used to fill up the result if this vector is shorter than that
.
the element to be used to fill up the result if that
is shorter than this vector.
a new collection of type That
containing pairs consisting of
corresponding elements of this vector and that
. The length
of the returned collection is the maximum of the lengths of this vector and that
.
If this vector is shorter than that
, thisElem
values are used to pad the result.
If that
is shorter than this vector, thatElem
values are used to pad the result.
Returns a vector formed from this vector and another iterable collection by combining corresponding elements in pairs.
Returns a vector formed from this vector and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
the iterable providing the second half of each result pair
the element to be used to fill up the result if this vector is shorter than that
.
the element to be used to fill up the result if that
is shorter than this vector.
a new collection of type That
containing pairs consisting of
corresponding elements of this vector and that
. The length
of the returned collection is the maximum of the lengths of this vector and that
.
If this vector is shorter than that
, thisElem
values are used to pad the result.
If that
is shorter than this vector, thatElem
values are used to pad the result.
[use case] Zips this vector with its indices.
Zips this vector with its indices.
A new collection of type That
containing pairs consisting of all elements of this
vector paired with their index. Indices start at 0
.
Zips this vector with its indices.
Zips this vector with its indices.
the type of the first half of the returned pairs (this is always a supertype
of the collection's element type A
).
the class of the returned collection. Where possible, That
is
the same class as the current collection class Repr
, but this
depends on the element type (A1, Int)
being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, (A1, Int), That]
.
is found.
A new collection of type That
containing pairs consisting of all elements of this
vector paired with their index. Indices start at 0
.
(Since version 2.8.0) use iterator' instead
Tests whether every element of this vector relates to the corresponding element of another sequence by satisfying a test predicate.
Tests whether every element of this vector relates to the corresponding element of another sequence by satisfying a test predicate.
the type of the elements of that
the other sequence
true
if both sequences have the same length and
p(x, y)
is true
for all corresponding elements x
of this vector
and y
of that
, otherwise false
.
(Since version 2.8.0) use corresponds
instead
Returns index of the first element satisfying a predicate, or -1
.
Returns index of the first element satisfying a predicate, or -1
.
(Since version 2.8.0) Use indexWhere(p) instead.
Returns index of the last element satisfying a predicate, or -1.
Returns index of the last element satisfying a predicate, or -1.
(Since version 2.8.0) use lastIndexWhere
instead
(Since version 2.8.0) use head' instead
None
if iterable is empty.
None
if iterable is empty.
(Since version 2.8.0) use headOption' instead
(Since version 2.8.0) this method is experimental and will be removed in a future release
(Since version 2.8.0) this method is experimental and will be removed in a future release
returns a projection that can be used to call non-strict filter
,
map
, and flatMap
methods that build projections
of the collection.
returns a projection that can be used to call non-strict filter
,
map
, and flatMap
methods that build projections
of the collection.
(Since version 2.8.0) use view' instead
(Since version 2.8.0) use reverseIterator' instead
Vector is a general-purpose, immutable data structure. It provides random access and updates in effectively constant time, as well as very fast append and prepend. Because vectors strike a good balance between fast random selections and fast random functional updates, they are currently the default implementation of immutable indexed sequences. It is backed by a little endian bit-mapped vector trie with a branching factor of 32. Locality is very good, but not contiguous, which is good for very large sequences.
the element type
"Scala's Collection Library overview" section on
Vectors
for more information.