Standard accessor task that iterates over the elements of the collection.
Performs two tasks in parallel, and waits for both to finish.
Sequentially performs one task after another.
Test two objects for inequality.
Test two objects for inequality.
true
if !(this == that), false otherwise.
Equivalent to x.hashCode
except for boxed numeric types and null
.
Equivalent to x.hashCode
except for boxed numeric types and null
.
For numerics, it returns a hash value which is consistent
with value equality: if two value type instances compare
as true, then ## will produce the same hash value for each
of them.
For null
returns a hashcode where null.hashCode
throws a
NullPointerException
.
a hash value consistent with ==
Computes the intersection between this set and another set.
Computes the intersection between this set and another set.
Note: Same as intersect
.
the set to intersect with.
a new set consisting of all elements that are both in this
set and in the given set that
.
The difference of this set and another set.
The difference of this set and another set.
Note: Same as diff
.
the set of elements to exclude.
a set containing those elements of this
set that are not also contained in the given set that
.
[use case] Returns a new parallel hash set containing the elements from the left hand operand followed by the elements from the right hand operand.
Returns a new parallel hash set containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the parallel hash set is the most specific superclass encompassing the element types of the two operands.
Example:
scala> val a = LinkedList(1) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1) scala> val b = LinkedList(2) b: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val c = a ++ b c: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2) scala> val d = LinkedList('a') d: scala.collection.mutable.LinkedList[Char] = LinkedList(a) scala> val e = c ++ d e: scala.collection.mutable.LinkedList[AnyVal] = LinkedList(1, 2, a)
the element type of the returned collection.
the traversable to append.
a new parallel hash set which contains all elements of this parallel hash set
followed by all elements of that
.
adds all elements produced by a TraversableOnce to this parallel hash set .
adds all elements produced by a TraversableOnce to this parallel hash set .
the TraversableOnce producing the elements to add.
the parallel hash set itself.
adds a single element to this parallel hash set .
adds a single element to this parallel hash set .
the element to add.
the parallel hash set itself
adds two or more elements to this parallel hash set .
adds two or more elements to this parallel hash set .
the first element to add.
the second element to add.
the remaining elements to add.
the parallel hash set itself
Removes all elements produced by an iterator from this parallel hash set .
Removes all elements produced by an iterator from this parallel hash set .
the iterator producing the elements to remove.
the parallel hash set itself
Removes a single element from this parallel hash set .
Removes a single element from this parallel hash set .
the element to remove.
the parallel hash set itself
Removes two or more elements from this parallel hash set .
Removes two or more elements from this parallel hash set .
the first element to remove.
the second element to remove.
the remaining elements to remove.
the parallel hash set itself
Applies a binary operator to a start value and all elements of this parallel hash set , going left to right.
Applies a binary operator to a start value and all elements of this parallel hash set , going left to right.
Note: /:
is alternate syntax for foldLeft
; z /: xs
is the same as
xs foldLeft z
.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (5 /: a)(_+_) b: Int = 15 scala> val c = (5 /: a)((x,y) => x + y) c: Int = 15
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this parallel hash set
,
going left to right with the start value z
on the left:
op(...op(op(z, x_1), x_2), ..., x_n)
where x_{1}, ..., x_{n}
are the elements of this parallel hash set
.
Applies a binary operator to all elements of this parallel hash set and a start value, going right to left.
Applies a binary operator to all elements of this parallel hash set and a start value, going right to left.
Note: :\
is alternate syntax for foldRight
; xs :\ z
is the same as
xs foldRight z
.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (a :\ 5)(_+_) b: Int = 15 scala> val c = (a :\ 5)((x,y) => x + y) c: Int = 15
the start value
the binary operator
the result of inserting op
between consecutive elements of this parallel hash set
,
going right to left with the start value z
on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x_{1}, ..., x_{n}
are the elements of this parallel hash set
.
Test two objects for equality.
Test two objects for equality.
The expression x == that
is equivalent to if (x eq null) that eq null else x.equals(that)
.
true
if the receiver object is equivalent to the argument; false
otherwise.
Add entry if not yet in table.
Add entry if not yet in table.
Returns true
if a new entry was added, false
otherwise.
Aggregates the results of applying an operator to subsequent elements.
Aggregates the results of applying an operator to subsequent elements.
This is a more general form of fold
and reduce
. It has similar semantics, but does
not require the result to be a supertype of the element type. It traverses the elements in
different partitions sequentially, using seqop
to update the result, and then
applies combop
to results from different partitions. The implementation of this
operation may operate on an arbitrary number of collection partitions, so combop
may be invoked arbitrary number of times.
For example, one might want to process some elements and then produce a Set
. In this
case, seqop
would process an element and append it to the list, while combop
would concatenate two lists from different partitions together. The initial value
z
would be an empty set.
pc.aggregate(Set[Int]())(_ += process(_), _ ++ _)
Another example is calculating geometric mean from a collection of doubles (one would typically require big doubles for this).
the type of accumulated results
the initial value for the accumulated result of the partition - this
will typically be the neutral element for the seqop
operator (e.g.
Nil
for list concatenation or 0
for summation)
an operator used to accumulate results within a partition
an associative operator used to combine results from different partitions
Composes two instances of Function1 in a new Function1, with this function applied first.
Composes two instances of Function1 in a new Function1, with this function applied first.
the result type of function g
a function R => A
a new function f
such that f(x) == g(apply(x))
Tests if some element is contained in this set.
Tests if some element is contained in this set.
This method is equivalent to contains
. It allows sets to be interpreted as predicates.
the element to test for membership.
true
if elem
is contained in this set, false
otherwise.
Cast the receiver object to be of type T0
.
Cast the receiver object to be of type T0
.
Note that the success of a cast at runtime is modulo Scala's erasure semantics.
Therefore the expression 1.asInstanceOf[String]
will throw a ClassCastException
at
runtime, while the expression List(1).asInstanceOf[List[String]]
will not.
In the latter example, because the type argument is erased as part of compilation it is
not possible to check whether the contents of the list are of the requested type.
the receiver object.
if the receiver object is not an instance of the erasure of type T0
.
Clears the parallel hash set 's contents.
Clears the parallel hash set 's contents. After this operation, the parallel hash set is empty.
Create a copy of the receiver object.
Create a copy of the receiver object.
The default implementation of the clone
method is platform dependent.
a copy of the receiver object.
not specified by SLS as a member of AnyRef
[use case] Builds a new collection by applying a partial function to all elements of this parallel hash set
Builds a new collection by applying a partial function to all elements of this parallel hash set
on which the function is defined.
the element type of the returned collection.
the partial function which filters and maps the parallel hash set .
a new parallel hash set
resulting from applying the given partial function
pf
to each element on which it is defined and collecting the results.
The order of the elements is preserved.
Creates a combiner factory.
Creates a combiner factory. Each combiner factory instance is used once per invocation of a parallel transformer method for a single collection.
The default combiner factory creates a new combiner every time it
is requested, unless the combiner is thread-safe as indicated by its
canBeShared
method. In this case, the method returns a factory which
returns the same combiner each time. This is typically done for
concurrent parallel collections, the combiners of which allow
thread safe access.
The factory companion object that builds instances of class ParHashSet
.
The factory companion object that builds instances of class ParHashSet
.
(or its Iterable
superclass where class ParHashSet
is not a Seq
.)
Composes two instances of Function1 in a new Function1, with this function applied last.
Composes two instances of Function1 in a new Function1, with this function applied last.
the type to which function g
can be applied
a function A => T1
a new function f
such that f(x) == apply(g(x))
Checks whether an element is contained in the hash table.
Checks whether an element is contained in the hash table.
[use case] Copies values of this parallel hash set to an array.
Copies values of this parallel hash set
to an array.
Fills the given array xs
with values of this parallel hash set
, beginning at index start
.
Copying will stop once either the end of the current parallel hash set
is reached,
or the end of the array is reached.
Note: will not terminate for infinite-sized collections.
the array to fill.
the starting index.
[use case] Copies values of this parallel hash set to an array.
Copies values of this parallel hash set
to an array.
Fills the given array xs
with values of this parallel hash set
.
Copying will stop once either the end of the current parallel hash set
is reached,
or the end of the array is reached.
Note: will not terminate for infinite-sized collections.
the array to fill.
Counts the number of elements in the parallel hash set which satisfy a predicate.
Counts the number of elements in the parallel hash set which satisfy a predicate.
the predicate used to test elements.
the number of elements satisfying the predicate p
.
Computes the difference of this set and another set.
Computes the difference of this set and another set.
the set of elements to exclude.
a set containing those elements of this
set that are not also contained in the given set that
.
Selects all elements except first n ones.
Selects all elements except first n ones.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the number of elements to drop from this parallel hash set .
a parallel hash set
consisting of all elements of this parallel hash set
except the first n
ones, or else the
empty parallel hash set
, if this parallel hash set
has less than n
elements.
Drops all elements in the longest prefix of elements that satisfy the predicate, and returns a collection composed of the remaining elements.
Drops all elements in the longest prefix of elements that satisfy the predicate, and returns a collection composed of the remaining elements.
This method will use indexFlag
signalling capabilities. This means
that splitters may set and read the indexFlag
state.
The index flag is initially set to maximum integer value.
the predicate used to test the elements
a collection composed of all the elements after the longest prefix of elements
in this parallel hash set
that satisfy the predicate pred
Tests whether the argument (arg0
) is a reference to the receiver object (this
).
Tests whether the argument (arg0
) is a reference to the receiver object (this
).
The eq
method implements an equivalence relation on
non-null instances of AnyRef
, and has three additional properties:
x
and y
of type AnyRef
, multiple invocations of
x.eq(y)
consistently returns true
or consistently returns false
.x
of type AnyRef
, x.eq(null)
and null.eq(x)
returns false
.null.eq(null)
returns true
. When overriding the equals
or hashCode
methods, it is important to ensure that their behavior is
consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2
), they
should be equal to each other (o1 == o2
) and they should hash to the same value (o1.hashCode == o2.hashCode
).
true
if the argument is a reference to the receiver object; false
otherwise.
Compares this set with another object for equality.
Compares this set with another object for equality.
Note: This operation contains an unchecked cast: if that
is a set, it will assume with an unchecked cast
that it has the same element type as this set.
Any subsequent ClassCastException is treated as a false
result.
the other object
true
if that
is a set which contains the same elements
as this set.
Tests whether a predicate holds for some element of this parallel hash set .
Tests whether a predicate holds for some element of this parallel hash set .
This method will use abort
signalling capabilities. This means
that splitters may send and read abort
signals.
a predicate used to test elements
true if p
holds for some element, false otherwise
Selects all elements of this parallel hash set which satisfy a predicate.
Selects all elements of this parallel hash set which satisfy a predicate.
the predicate used to test elements.
a new parallel hash set
consisting of all elements of this parallel hash set
that satisfy the given
predicate p
. Their order may not be preserved.
Selects all elements of this parallel hash set which do not satisfy a predicate.
Selects all elements of this parallel hash set which do not satisfy a predicate.
the predicate used to test elements.
a new parallel hash set
consisting of all elements of this parallel hash set
that do not satisfy the given
predicate p
. Their order may not be preserved.
Called by the garbage collector on the receiver object when there are no more references to the object.
Called by the garbage collector on the receiver object when there are no more references to the object.
The details of when and if the finalize
method is invoked, as
well as the interaction between finalize
and non-local returns
and exceptions, are all platform dependent.
Finds some element in the collection for which the predicate holds, if such an element exists.
Finds some element in the collection for which the predicate holds, if such an element exists. The element may not necessarily be the first such element in the iteration order.
If there are multiple elements obeying the predicate, the choice is nondeterministic.
This method will use abort
signalling capabilities. This means
that splitters may send and read abort
signals.
predicate used to test the elements
an option value with the element if such an element exists, or None
otherwise
Finds an entry in the hash table if such an element exists.
Finds an entry in the hash table if such an element exists.
[use case] Builds a new collection by applying a function to all elements of this parallel hash set
Builds a new collection by applying a function to all elements of this parallel hash set
and using the elements of the resulting collections.
For example:
def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")
The type of the resulting collection is guided by the static type of parallel hash set . This might cause unexpected results sometimes. For example:
// lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet) // lettersOf will return a Set[Char], not a Seq def lettersOf(words: Seq[String]) = words.toSet flatMap (word => word.toSeq) // xs will be a an Iterable[Int] val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2) // ys will be a Map[Int, Int] val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)
the element type of the returned collection.
the function to apply to each element.
a new parallel hash set
resulting from applying the given collection-valued function
f
to each element of this parallel hash set
and concatenating the results.
[use case] Converts this parallel hash set of traversable collections into a parallel hash set formed by the elements of these traversable collections.
Converts this parallel hash set of traversable collections into a parallel hash set formed by the elements of these traversable collections.
The resulting collection's type will be guided by the static type of parallel hash set . For example:
val xs = List(Set(1, 2, 3), Set(1, 2, 3)) // xs == List(1, 2, 3, 1, 2, 3) val ys = Set(List(1, 2, 3), List(3, 2, 1)) // ys == Set(1, 2, 3)
the type of the elements of each traversable collection.
a new parallel hash set resulting from concatenating all element parallel hash set s.
Folds the elements of this sequence using the specified associative binary operator.
Folds the elements of this sequence using the specified associative binary operator. The order in which the elements are reduced is unspecified and may be nondeterministic.
Note this method has a different signature than the foldLeft
and foldRight
methods of the trait Traversable
.
The result of folding may only be a supertype of this parallel collection's
type parameter T
.
a type parameter for the binary operator, a supertype of T
.
a neutral element for the fold operation, it may be added to the result
an arbitrary number of times, not changing the result (e.g. Nil
for list concatenation,
0 for addition, or 1 for multiplication)
a binary operator that must be associative
the result of applying fold operator op
between all the elements and z
Applies a binary operator to a start value and all elements of this parallel hash set , going left to right.
Applies a binary operator to a start value and all elements of this parallel hash set , going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this parallel hash set
,
going left to right with the start value z
on the left:
op(...op(z, x_1), x_2, ..., x_n)
where x_{1}, ..., x_{n}
are the elements of this parallel hash set
.
Applies a binary operator to all elements of this parallel hash set and a start value, going right to left.
Applies a binary operator to all elements of this parallel hash set and a start value, going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the start value.
the binary operator.
the result of inserting op
between consecutive elements of this parallel hash set
,
going right to left with the start value z
on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x_{1}, ..., x_{n}
are the elements of this parallel hash set
.
Tests whether a predicate holds for all elements of this parallel hash set .
Tests whether a predicate holds for all elements of this parallel hash set .
This method will use abort
signalling capabilities. This means
that splitters may send and read abort
signals.
a predicate used to test elements
true if p
holds for all elements, false otherwise
Applies a function f
to all the elements of parallel hash set
in a undefined order.
Applies a function f
to all the elements of parallel hash set
in a undefined order.
the result type of the function applied to each element, which is always discarded
function applied to each element
Returns string formatted according to given format
string.
Returns string formatted according to given format
string.
Format strings are as for String.format
(@see java.lang.String.format).
The generic builder that builds instances of ParHashSet
at arbitrary element types.
The generic builder that builds instances of ParHashSet
at arbitrary element types.
A representation that corresponds to the dynamic class of the receiver object.
A representation that corresponds to the dynamic class of the receiver object.
The nature of the representation is platform dependent.
a representation that corresponds to the dynamic class of the receiver object.
not specified by SLS as a member of AnyRef
Partitions this parallel hash set into a map of parallel hash set s according to some discriminator function.
Partitions this parallel hash set into a map of parallel hash set s according to some discriminator function.
Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new parallel hash set .
the type of keys returned by the discriminator function.
the discriminator function.
A map from keys to parallel hash set s such that the following invariant holds:
(xs partition f)(k) = xs filter (x => f(x) == k)
That is, every key k
is bound to a parallel hash set
of those elements x
for which f(x)
equals k
.
The hashCode method for reference types.
The hashCode method for reference types. See hashCode in scala.Any.
the hash code value for this object.
Selects the first element of this parallel hash set .
Selects the first element of this parallel hash set .
Note: might return different results for different runs, unless the underlying collection type is ordered.
the first element of this parallel hash set .
if the parallel hash set is empty.
Optionally selects the first element.
Optionally selects the first element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the first element of this parallel hash set
if it is nonempty,
None
if it is empty.
Selects all elements except the last.
Selects all elements except the last.
Note: might return different results for different runs, unless the underlying collection type is ordered.
a parallel hash set consisting of all elements of this parallel hash set
except the last one.
if the parallel hash set is empty.
The initial size of the hash table.
The initial size of the hash table.
Computes the intersection between this set and another set.
Computes the intersection between this set and another set.
the set to intersect with.
a new set consisting of all elements that are both in this
set and in the given set that
.
Tests whether the parallel hash set is empty.
Tests whether the parallel hash set is empty.
true
if the parallel hash set
contains no elements, false
otherwise.
Test whether the dynamic type of the receiver object is T0
.
Test whether the dynamic type of the receiver object is T0
.
Note that the result of the test is modulo Scala's erasure semantics.
Therefore the expression 1.isInstanceOf[String]
will return false
, while the
expression List(1).isInstanceOf[List[String]]
will return true
.
In the latter example, because the type argument is erased as part of compilation it is
not possible to check whether the contents of the list are of the specified type.
true
if the receiver object is an instance of erasure of type T0
; false
otherwise.
Denotes whether this parallel collection has strict splitters.
Denotes whether this parallel collection has strict splitters.
This is true in general, and specific collection instances may choose to
override this method. Such collections will fail to execute methods
which rely on splitters being strict, i.e. returning a correct value
in the remaining
method.
This method helps ensure that such failures occur on method invocations, rather than later on and in unpredictable ways.
Tests whether this parallel hash set can be repeatedly traversed.
Tests whether this parallel hash set can be repeatedly traversed.
true
Creates a new split iterator used to traverse the elements of this collection.
Creates a new split iterator used to traverse the elements of this collection.
By default, this method is implemented in terms of the protected splitter
method.
a split iterator
Selects the last element.
Selects the last element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
The last element of this parallel hash set .
If the parallel hash set is empty.
Optionally selects the last element.
Optionally selects the last element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the last element of this parallel hash set
$ if it is nonempty,
None
if it is empty.
[use case] Builds a new collection by applying a function to all elements of this parallel hash set .
Builds a new collection by applying a function to all elements of this parallel hash set .
the element type of the returned collection.
the function to apply to each element.
a new parallel hash set
resulting from applying the given function
f
to each element of this parallel hash set
and collecting the results.
[use case] Finds the largest element.
Finds the largest element.
the largest element of this parallel hash set .
[use case] Finds the smallest element.
Finds the smallest element.
the smallest element of this parallel hash set
Displays all elements of this parallel hash set in a string.
Displays all elements of this parallel hash set in a string.
a string representation of this parallel hash set
. In the resulting string
the string representations (w.r.t. the method toString
)
of all elements of this parallel hash set
follow each other without any
separator string.
Displays all elements of this parallel hash set in a string using a separator string.
Displays all elements of this parallel hash set in a string using a separator string.
the separator string.
a string representation of this parallel hash set
. In the resulting string
the string representations (w.r.t. the method toString
)
of all elements of this parallel hash set
are separated by the string sep
.
List(1, 2, 3).mkString("|") = "1|2|3"
Displays all elements of this parallel hash set in a string using start, end, and separator strings.
Displays all elements of this parallel hash set in a string using start, end, and separator strings.
the starting string.
the separator string.
the ending string.
a string representation of this parallel hash set
. The resulting string
begins with the string start
and ends with the string
end
. Inside, the string representations (w.r.t. the method
toString
) of all elements of this parallel hash set
are separated by
the string sep
.
List(1, 2, 3).mkString("(", "; ", ")") = "(1; 2; 3)"
Equivalent to !(this eq that)
.
Equivalent to !(this eq that)
.
true
if the argument is not a reference to the receiver object; false
otherwise.
The builder that builds instances of type ParHashSet
[A]
The builder that builds instances of type ParHashSet
[A]
Tests whether the parallel hash set is not empty.
Tests whether the parallel hash set is not empty.
true
if the parallel hash set
contains at least one element, false
otherwise.
Wakes up a single thread that is waiting on the receiver object's monitor.
Wakes up a single thread that is waiting on the receiver object's monitor.
not specified by SLS as a member of AnyRef
Wakes up all threads that are waiting on the receiver object's monitor.
Wakes up all threads that are waiting on the receiver object's monitor.
not specified by SLS as a member of AnyRef
Returns a parallel implementation of this collection.
Returns a parallel implementation of this collection.
For most collection types, this method creates a new parallel collection by copying
all the elements. For these collection, par
takes linear time. Mutable collections
in this category do not produce a mutable parallel collection that has the same
underlying dataset, so changes in one collection will not be reflected in the other one.
Specific collections (e.g. ParArray
or mutable.ParHashMap
) override this default
behaviour by creating a parallel collection which shares the same underlying dataset.
For these collections, par
takes constant or sublinear time.
All parallel collections return a reference to themselves.
a parallel implementation of this collection
The default par
implementation uses the combiner provided by this method
to create a new parallel collection.
The default par
implementation uses the combiner provided by this method
to create a new parallel collection.
a combiner for the parallel collection of type ParRepr
Partitions this parallel hash set in two parallel hash set s according to a predicate.
Partitions this parallel hash set in two parallel hash set s according to a predicate.
the predicate on which to partition.
a pair of parallel hash set
s: the first parallel hash set
consists of all elements that
satisfy the predicate p
and the second parallel hash set
consists of all elements
that don't. The relative order of the elements in the resulting parallel hash set
s
may not be preserved.
[use case] Multiplies up the elements of this collection.
Multiplies up the elements of this collection.
the product of all elements in this parallel hash set
of numbers of type Int
.
Instead of Int
, any other type T
with an implicit Numeric[T]
implementation
can be used as element type of the parallel hash set
and as result type of product
.
Examples of such types are: Long
, Float
, Double
, BigInt
.
Reduces the elements of this sequence using the specified associative binary operator.
Reduces the elements of this sequence using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
Note this method has a different signature than the reduceLeft
and reduceRight
methods of the trait Traversable
.
The result of reducing may only be a supertype of this parallel collection's
type parameter T
.
A type parameter for the binary operator, a supertype of T
.
A binary operator that must be associative.
The result of applying reduce operator op
between all the elements if the collection is nonempty.
if this parallel hash set is empty.
Optionally applies a binary operator to all elements of this parallel hash set , going left to right.
Optionally applies a binary operator to all elements of this parallel hash set , going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the binary operator.
an option value containing the result of reduceLeft(op)
is this parallel hash set
is nonempty,
None
otherwise.
Optionally reduces the elements of this sequence using the specified associative binary operator.
Optionally reduces the elements of this sequence using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
Note this method has a different signature than the reduceLeftOption
and reduceRightOption
methods of the trait Traversable
.
The result of reducing may only be a supertype of this parallel collection's
type parameter T
.
A type parameter for the binary operator, a supertype of T
.
A binary operator that must be associative.
An option value containing result of applying reduce operator op
between all
the elements if the collection is nonempty, and None
otherwise.
Applies a binary operator to all elements of this parallel hash set , going right to left.
Applies a binary operator to all elements of this parallel hash set , going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the binary operator.
the result of inserting op
between consecutive elements of this parallel hash set
,
going right to left:
op(x_1, op(x_2, ..., op(x_{n-1}, x_n)...))
where x_{1}, ..., x_{n}
are the elements of this parallel hash set
.
if this parallel hash set is empty.
Optionally applies a binary operator to all elements of this parallel hash set , going right to left.
Optionally applies a binary operator to all elements of this parallel hash set , going right to left.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the binary operator.
an option value containing the result of reduceRight(op)
is this parallel hash set
is nonempty,
None
otherwise.
Removes an entry from the hash table, returning an option value with the element, or None
if it didn't exist.
Removes an entry from the hash table, returning an option value with the element, or None
if it didn't exist.
Optionally reuses an existing combiner for better performance.
Optionally reuses an existing combiner for better performance. By default it doesn't - subclasses may override this behaviour.
The provided combiner oldc
that can potentially be reused will be either some combiner from the previous computational task, or None
if there
was no previous phase (in which case this method must return newc
).
The combiner that is the result of the previous task, or None
if there was no previous task.
The new, empty combiner that can be used.
Either newc
or oldc
.
[use case] Checks if the other iterable collection contains the same elements in the same order as this parallel hash set .
Checks if the other iterable collection contains the same elements in the same order as this parallel hash set .
Note: might return different results for different runs, unless the underlying collection type is ordered.
Note: will not terminate for infinite-sized collections.
the collection to compare with.
true
, if both collections contain the same elements in the same order, false
otherwise.
[use case] Computes a prefix scan of the elements of the collection.
Computes a prefix scan of the elements of the collection.
Note: The neutral element z
may be applied more than once.
neutral element for the operator op
the associative operator for the scan
a new parallel hash set containing the prefix scan of the elements in this parallel hash set
Produces a collection containing cumulative results of applying the operator going left to right.
Produces a collection containing cumulative results of applying the operator going left to right.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom
which determines
the result class That
from the current representation type Repr
and
and the new element type B
.
collection with intermediate results
Produces a collection containing cumulative results of applying the operator going right to left.
Produces a collection containing cumulative results of applying the operator going right to left. The head of the collection is the last cumulative result.
Note: will not terminate for infinite-sized collections.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Example:
List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom
which determines
the result class That
from the current representation type Repr
and
and the new element type B
.
collection with intermediate results
The size of this parallel hash set .
The size of this parallel hash set .
Note: will not terminate for infinite-sized collections.
the number of elements in this parallel hash set .
The array keeping track of number of elements in 32 element blocks.
The array keeping track of number of elements in 32 element blocks.
Selects an interval of elements.
Selects an interval of elements. The returned collection is made up
of all elements x
which satisfy the invariant:
from <= indexOf(x) < until
Note: might return different results for different runs, unless the underlying collection type is ordered.
the lowest index to include from this parallel hash set .
the lowest index to EXCLUDE from this parallel hash set .
a parallel hash set
containing the elements greater than or equal to
index from
extending up to (but not including) index until
of this parallel hash set
.
Splits this parallel hash set into a prefix/suffix pair according to a predicate.
Splits this parallel hash set into a prefix/suffix pair according to a predicate.
This method will use indexFlag
signalling capabilities. This means
that splitters may set and read the indexFlag
state.
The index flag is initially set to maximum integer value.
the predicate used to test the elements
a pair consisting of the longest prefix of the collection for which all
the elements satisfy pred
, and the rest of the collection
Splits this parallel hash set into two at a given position.
Splits this parallel hash set
into two at a given position.
Note: c splitAt n
is equivalent to (but possibly more efficient than)
(c take n, c drop n)
.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the position at which to split.
a pair of parallel hash set
s consisting of the first n
elements of this parallel hash set
, and the other elements.
Creates a new parallel iterator used to traverse the elements of this parallel collection.
Creates a new parallel iterator used to traverse the elements of this parallel collection.
This iterator is more specific than the iterator of the returned by iterator
, and augmented
with additional accessor and transformer methods.
a parallel iterator
Defines the prefix of this object's toString
representation.
Defines the prefix of this object's toString
representation.
a string representation which starts the result of toString
applied to this parallel hash set
. By default the string prefix is the
simple name of the collection class parallel hash set
.
Tests whether this set is a subset of another set.
Tests whether this set is a subset of another set.
the set to test.
true
if this set is a subset of that
, i.e. if
every element of this set is also an element of that
.
[use case] Sums up the elements of this collection.
Sums up the elements of this collection.
the sum of all elements in this parallel hash set
of numbers of type Int
.
Instead of Int
, any other type T
with an implicit Numeric[T]
implementation
can be used as element type of the parallel hash set
and as result type of sum
.
Examples of such types are: Long
, Float
, Double
, BigInt
.
The actual hash table.
The actual hash table.
The number of mappings contained in this hash table.
The number of mappings contained in this hash table.
Selects all elements except the first.
Selects all elements except the first.
Note: might return different results for different runs, unless the underlying collection type is ordered.
a parallel hash set consisting of all elements of this parallel hash set
except the first one.
if the parallel hash set is empty.
Selects first n elements.
Selects first n elements.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the number of elements to take from this parallel hash set .
a parallel hash set
consisting only of the first n
elements of this parallel hash set
,
or else the whole parallel hash set
, if it has less than n
elements.
Takes the longest prefix of elements that satisfy the predicate.
Takes the longest prefix of elements that satisfy the predicate.
This method will use indexFlag
signalling capabilities. This means
that splitters may set and read the indexFlag
state.
The index flag is initially set to maximum integer value.
the predicate used to test the elements
the longest prefix of this parallel hash set
of elements that satisy the predicate pred
The task support object which is responsible for scheduling and load-balancing tasks to processors.
The task support object which is responsible for scheduling and load-balancing tasks to processors.
Changes the task support object which is responsible for scheduling and load-balancing tasks to processors.
Changes the task support object which is responsible for scheduling and load-balancing tasks to processors.
A task support object can be changed in a parallel collection after it has been created, but only during a quiescent period, i.e. while there are no concurrent invocations to parallel collection methods.
Here is a way to change the task support of a parallel collection:
import scala.collection.parallel._ val pc = mutable.ParArray(1, 2, 3) pc.tasksupport = new ForkJoinTaskSupport( new scala.concurrent.forkjoin.ForkJoinPool(2))
The next size value at which to resize (capacity * load factor).
The next size value at which to resize (capacity * load factor).
[use case] Converts this parallel hash set into another by copying all elements.
Converts this parallel hash set into another by copying all elements.
Note: will not terminate for infinite-sized collections.
The collection type to build.
a new collection containing all elements of this parallel hash set .
[use case] Converts this parallel hash set to an array.
Converts this parallel hash set to an array.
Note: will not terminate for infinite-sized collections.
an array containing all elements of this parallel hash set
.
An ClassTag
must be available for the element type of this parallel hash set
.
Converts this parallel hash set to a mutable buffer.
Converts this parallel hash set to a mutable buffer.
Note: will not terminate for infinite-sized collections.
a buffer containing all elements of this parallel hash set .
Converts this parallel hash set to an indexed sequence.
Converts this parallel hash set to an indexed sequence.
Note: will not terminate for infinite-sized collections.
an indexed sequence containing all elements of this parallel hash set .
Converts this parallel hash set to an iterable collection.
Converts this parallel hash set
to an iterable collection. Note that
the choice of target Iterable
is lazy in this default implementation
as this TraversableOnce
may be lazy and unevaluated (i.e. it may
be an iterator which is only traversable once).
Note: will not terminate for infinite-sized collections.
an Iterable
containing all elements of this parallel hash set
.
Returns an Iterator over the elements in this parallel hash set .
Returns an Iterator over the elements in this parallel hash set . Will return the same Iterator if this instance is already an Iterator.
Note: will not terminate for infinite-sized collections.
an Iterator containing all elements of this parallel hash set .
Converts this parallel hash set to a list.
Converts this parallel hash set to a list.
Note: will not terminate for infinite-sized collections.
a list containing all elements of this parallel hash set .
[use case] Converts this parallel hash set to a map.
Converts this parallel hash set to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.
Note: will not terminate for infinite-sized collections.
a map of type immutable.Map[T, U]
containing all key/value pairs of type (T, U)
of this parallel hash set
.
Converts this parallel hash set to a sequence.
Converts this parallel hash set
to a sequence. As with toIterable
, it's lazy
in this default implementation, as this TraversableOnce
may be
lazy and unevaluated.
Note: will not terminate for infinite-sized collections.
a sequence containing all elements of this parallel hash set .
Converts this parallel hash set to a set.
Converts this parallel hash set to a set.
Note: will not terminate for infinite-sized collections.
a set containing all elements of this parallel hash set .
Converts this parallel hash set to a stream.
Converts this parallel hash set to a stream.
Note: will not terminate for infinite-sized collections.
a stream containing all elements of this parallel hash set .
Creates a String representation of this object.
Creates a String representation of this object. The default representation is platform dependent. On the java platform it is the concatenation of the class name, "@", and the object's hashcode in hexadecimal.
a String representation of the object.
Converts this parallel hash set to an unspecified Traversable.
Converts this parallel hash set to an unspecified Traversable. Will return the same collection if this instance is already Traversable.
Note: will not terminate for infinite-sized collections.
a Traversable containing all elements of this parallel hash set .
Converts this parallel hash set to a Vector.
Converts this parallel hash set to a Vector.
Note: will not terminate for infinite-sized collections.
a vector containing all elements of this parallel hash set .
Transposes this parallel hash set of traversable collections into a parallel hash set of parallel hash set s.
Transposes this parallel hash set of traversable collections into a parallel hash set of parallel hash set s.
the type of the elements of each traversable collection.
an implicit conversion which asserts that the
element type of this parallel hash set
is a Traversable
.
a two-dimensional parallel hash set of parallel hash set s which has as nth row the nth column of this parallel hash set .
(Changed in version 2.9.0) transpose
throws an IllegalArgumentException
if collections are not uniformly sized.
if all collections in this parallel hash set
are not of the same size.
Computes the union between of set and another set.
Computes the union between of set and another set.
the set to form the union with.
a new set consisting of all elements that are in this
set or in the given set that
.
Converts this parallel hash set of pairs into two collections of the first and second half of each pair.
Converts this parallel hash set of pairs into two collections of the first and second half of each pair.
the type of the first half of the element pairs
the type of the second half of the element pairs
an implicit conversion which asserts that the element type of this parallel hash set is a pair.
a pair parallel hash set s, containing the first, respectively second half of each element pair of this parallel hash set .
Converts this parallel hash set of triples into three collections of the first, second, and third element of each triple.
Converts this parallel hash set of triples into three collections of the first, second, and third element of each triple.
the type of the first member of the element triples
the type of the second member of the element triples
the type of the third member of the element triples
an implicit conversion which asserts that the element type of this parallel hash set is a triple.
a triple parallel hash set s, containing the first, second, respectively third member of each element triple of this parallel hash set .
[use case] Returns a parallel hash set formed from this parallel hash set and another iterable collection by combining corresponding elements in pairs.
Returns a parallel hash set formed from this parallel hash set and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
a new parallel hash set
containing pairs consisting of
corresponding elements of this parallel hash set
and that
. The length
of the returned collection is the minimum of the lengths of this parallel hash set
and that
.
[use case] Returns a parallel hash set formed from this parallel hash set and another iterable collection by combining corresponding elements in pairs.
Returns a parallel hash set formed from this parallel hash set and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
the element to be used to fill up the result if this parallel hash set
is shorter than that
.
the element to be used to fill up the result if that
is shorter than this parallel hash set
.
a new parallel hash set
containing pairs consisting of
corresponding elements of this parallel hash set
and that
. The length
of the returned collection is the maximum of the lengths of this parallel hash set
and that
.
If this parallel hash set
is shorter than that
, thisElem
values are used to pad the result.
If that
is shorter than this parallel hash set
, thatElem
values are used to pad the result.
[use case] Zips this parallel hash set with its indices.
Zips this parallel hash set with its indices.
Note: might return different results for different runs, unless the underlying collection type is ordered.
A new parallel hash set
containing pairs consisting of all elements of this
parallel hash set
paired with their index. Indices start at 0
.
List("a", "b", "c").zipWithIndex = List(("a", 0), ("b", 1), ("c", 2))
Computes the union between this set and another set.
Computes the union between this set and another set.
Note: Same as union
.
the set to form the union with.
a new set consisting of all elements that are in this
set or in the given set that
.
(parHashSet: StringAdd).+(other)
(parHashSet: StringAdd).self
(parHashSet: StringFormat).self
A syntactic sugar for out of order folding.
A syntactic sugar for out of order folding. See fold
.
Example:
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (a /:\ 5)(_+_) b: Int = 15
(Since version 2.10.0) use fold instead
(parHashSet: ArrowAssoc[ParHashSet[T]]).x
(Since version 2.10.0) Use leftOfArrow
instead
(parHashSet: Ensuring[ParHashSet[T]]).x
(Since version 2.10.0) Use resultOfEnsuring
instead
A parallel hash set.
ParHashSet
is a parallel set which internally keeps elements within a hash table. It uses linear probing to resolve collisions.type of the elements in the parallel hash set .